Conical Countersink
-
Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 31 mm ( 8000422469 )
Fri, 09/26/2025
Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 31 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!
CHF 49.54
-
Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 8.3 mm ( 8000422471 )
Fri, 09/26/2025
Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 8.3 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.15 mm/revFor commercial use, please observe the building regulations!
CHF 23.29
-
Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 25 mm ( 8000422468 )
Fri, 09/26/2025
Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 25 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!
CHF 41.69
-
Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 23 mm ( 8000422467 )
Fri, 09/26/2025
Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 23 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!
CHF 38.72
-
Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 20.5 mm ( 8000422466 )
Fri, 09/26/2025
Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 20.5 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!
CHF 35.77
-
Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 16.5 mm ( 8000422464 )
Fri, 09/26/2025
Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 16.5 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!
CHF 30.23
-
Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 19 mm ( 8000422465 )
Fri, 09/26/2025
Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 19 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.2 mm/revFor commercial use, please observe the building regulations!
CHF 32.83
-
Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 15 mm ( 8000422463 )
Fri, 09/26/2025
Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 15 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.15 mm/revFor commercial use, please observe the building regulations!
CHF 27.82
-
Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 12.4 mm ( 8000422462 )
Fri, 09/26/2025
Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 12.4 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.15 mm/revFor commercial use, please observe the building regulations!
CHF 26.93
-
Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 10.4 mm ( 8000422461 )
Fri, 09/26/2025
Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 10.4 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.15 mm/revFor commercial use, please observe the building regulations!
CHF 23.67
-
FEIN FEIN core drill Ultra 35 nominal Ø 48 mm ( 4149702048 )
Fri, 09/26/2025
Scope of Delivery: - Core drill Ultra 35 nominal Ø 48 mm Product Description: Carbide-tipped - with Quick IN shank 18 mm - maximum tool life and excellent cutting performance - metric dimensions - cutting depth 35 mm Technical Data: - Shank design: Quick INFor commercial use, please observe the building regulations!
CHF 84.24
-
FEIN FEIN core drill Ultra 35 nominal Ø 34 mm ( 4149702034 )
Fri, 09/26/2025
Scope of Delivery: - Core drill Ultra 35 nominal Ø 34 mm Product Description: Carbide-tipped - with Quick IN shank 18 mm - maximum tool life and excellent cutting performance - metric dimensions - cutting depth 35 mm Technical Data: - Shank design: Quick INFor commercial use, please observe the building regulations!
CHF 57.67
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"