Chisels & Accessories
-
Ruko RUKO twist drill DIN 345 type N nominal Ø 17.5 mm ( 4000601312 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 17.5 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK2 - Quality: profile groundFor commercial use, please observe the building regulations!
CHF 26.38
-
Ruko RUKO twist drill DIN 345 type N nominal Ø 14 mm ( 4000601305 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 14 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK1 - Quality: profile groundFor commercial use, please observe the building regulations!
CHF 22.61
-
Ruko RUKO twist drill DIN 345 type N nominal Ø 15.5 mm ( 4000601308 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 15.5 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK2 - Quality: profile groundFor commercial use, please observe the building regulations!
CHF 23.48
-
Ruko RUKO twist drill DIN 345 type N nominal Ø 13.5 mm ( 4000601304 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 13.5 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK1 - Quality: profile groundFor commercial use, please observe the building regulations!
CHF 20.21
-
Ruko RUKO Spiralbohrer DIN 338 Typ N Nenn-Ø 9,1 mm ( 4000600218 )
Lieferumfang:Spiralbohrer DIN 338 Typ N Nenn-Ø 9,1 mmProduktbeschreibung:HSS · DIN 338 · Typ N · Spitzenwinkel 118 ° · rechtsschneidend · Kegelmantelanschliff, ab Ø 2,0 mm Kreuzanschliff nach DIN 1412 C · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · für Stahl, Stahlguss legiert und unlegiert (bis 900 N/mm² Festigkeit), Grau-, Temper-, Sphäro- und Druckguss, Sintereisen, Neusilber, Graphit, kurzspanende Aluminiumlegierungen, Messing und Bronze · Leistungsstarker Spiralbohrer, geeignet für alle normalen Bohrarbeiten in allgemein gängigen Werkstoffen Weitere Größen auf Anfrage verfügbar.Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,18mm/U Qualität: profilgeschliffen Nenn-Ø-Toleranz: h8
-
Ruko RUKO Spiralbohrer DIN 338 Typ N Nenn-Ø 20 mm ( 4000600093 )
Lieferumfang:Spiralbohrer DIN 338 Typ N Nenn-Ø 20 mmProduktbeschreibung:HSS · DIN 338 · Typ N · Spitzenwinkel 118 ° · profilgeschliffen · rechtsschneidend · Kreuzanschliff nach DIN 1412 C · mit abgesetztem Schaft · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · für Stahl, Stahlguss legiert und unlegiert (bis 900 N/mm² Festigkeit), Grau-, Temper-, Sphäro- und Druckguss, Sintereisen, Neusilber, Graphit, kurzspanende Aluminiumlegierungen, Messing und Bronze · Ideal geeignet zum Bohren größerer Bohrdurchmesser für alle gängigen Bohrmaschinen mit einem Spannfutter bis 13,0 mm Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,14mm/U Qualität: profilgeschliffen Schaftlänge: 35mm
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 12 mm HSS-Co5 ( 4000600097 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 12 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 30mmFor commercial use, please observe the building regulations!
CHF 17.05
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 18 mm HSS-Co5 ( 4000600109 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 18 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 35mmFor commercial use, please observe the building regulations!
CHF 29.81
-
Ruko RUKO Spiralbohrer DIN 338 Typ N Nenn-Ø 17,5 mm ( 4000600088 )
Lieferumfang:Spiralbohrer DIN 338 Typ N Nenn-Ø 17,5 mmProduktbeschreibung:HSS · DIN 338 · Typ N · Spitzenwinkel 118 ° · profilgeschliffen · rechtsschneidend · Kreuzanschliff nach DIN 1412 C · mit abgesetztem Schaft · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · für Stahl, Stahlguss legiert und unlegiert (bis 900 N/mm² Festigkeit), Grau-, Temper-, Sphäro- und Druckguss, Sintereisen, Neusilber, Graphit, kurzspanende Aluminiumlegierungen, Messing und Bronze · Ideal geeignet zum Bohren größerer Bohrdurchmesser für alle gängigen Bohrmaschinen mit einem Spannfutter bis 13,0 mm Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,14mm/U Qualität: profilgeschliffen Schaftlänge: 35mm
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 16.5 mm HSS-Co5 ( 4000600106 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 16.5 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 35mmFor commercial use, please observe the building regulations!
CHF 25.87
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 10.2 mm ( 4000600527 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 10.2 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
CHF 56.48
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 10.5 mm ( 4000600528 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 10.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
CHF 31.73
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"