Chisels & Accessories
-
HELLER HELLER Hammer drill Trijet Ultimate D.8,0mm Working-L.100mm L.160mm ( 4300000173 )
Wed, 10/22/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.8,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 14.50
-
HELLER HELLER Hammer drill Y-Cutter Ergo D.24 mm Working-L.400 mm L.450 mm ( 8000656332 )
Wed, 10/22/2025
Scope of Delivery: - Hammer drill Y-Cutter Ergo D.24 mm Working-L.400 mm L.450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 160°For commercial use, please observe the building regulations!
CHF 79.47
-
HELLER HELLER hammer drill Trijet Ultimate D.6,0mm Working-L.100mm L.160mm ( 4300000172 )
Wed, 10/22/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.6,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 13.23
-
HELLER HELLER hammer drill Trijet Ultimate D.14,0mm Working-L.250mm L.300mm ( 4300000185 )
Wed, 10/22/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.14,0mm Working-L.250mm L.300mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 32.22
-
HELLER HELLER hammer drill Trijet Ultimate D.10,0mm Working-L.150mm L.210mm ( 4300000178 )
Scope of Delivery: - Hammer drill Trijet Ultimate D.10,0mm Working-L.150mm L.210mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
-
HELLER HELLER hammer drill Trijet Ø 8 mm working l.400 mm l.460 mm ( 8000656694 )
Wed, 10/22/2025
Scope of Delivery: - Hammer drill Trijet Ø 8 mm working l.400 mm l.460 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 32.22
-
HELLER HELLER hammer drill Trijet Ø 12 mm working l.200 mm l.260 mm ( 8000656699 )
Wed, 10/22/2025
Scope of Delivery: - Hammer drill Trijet Ø 12 mm working l.200 mm l.260 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 21.46
-
HELLER HELLER Trijet hammer drill bit Ø 14 mm working length 100 mm length 160 mm ( 8000656702 )
Wed, 10/22/2025
Scope of Delivery: - Hammer drill Trijet Ø 14 mm working l.100 mm l.160 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 22.72
-
HELLER HELLER hammer drill Trijet Ø 12 mm working l.400 mm l.450 mm ( 8000656700 )
Scope of Delivery: - Hammer drill Trijet Ø 12 mm working l.400 mm l.450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
-
Bosch BOSCH Spitzmeißel Länge 250 mm ( 8000345748 )
Lieferumfang:Spitzmeißel Länge 250 mmProduktbeschreibung:Spitzmeißel mit SDS plus. Schlagwerkzeug mit Drehstopp für leichte Bohr- und Schlaghämmer. Der Spitzmeißel mit SDS plus-Aufnahme und einer Gesamtlänge von 250 mm ermöglicht verschiedene Standardarbeiten beim Renovieren und Restaurieren. Der Meißel mit seiner Spitze ist bestimmt für abschließende Anpassungsarbeiten in Beton und Mauerwerk · für das Einreißen oder Entfernen von Wänden sowie für das Wiederherstellen von Fugen und das Freilegen von Armierungen. Er ist kompatibel mit dem Aufnahmesystem SDS plus. Jedoch kann er auch direkt mit Hämmern des Typs mit SDS plus mit Drehstopp verwendet werden.Technische Daten:
-
Bosch BOSCH pointed chisel length 600 mm ( 8000345744 )
Wed, 10/22/2025
Scope of Delivery: - Pointed chisel length 600 mm Product Description: Pointed chisel with SDS max. impact tool for heavy-duty rotary and percussion hammers. The pointed chisel with SDS max holder and an overall length of 600 mm enables standard chiselling work for various types of demolition work. The tip enables precise adjustment work in concrete. The chisel is designed for work in concrete and masonry - including chiselling, demolition and adjustment work - as well as for restoring joints and exposing reinforcements. It is compatible with the SDS max shank system. Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 24.43
-
Bosch BOSCH Hammer drill Plus-5 Ø 6.0 mm working length 400 mm length 465 mm ( 8000341457 )
Scope of Delivery: - Hammer drill Plus-5 Ø 6.0 mm working length 400 mm length 465 mm Product Description: with SDS-plus holder - Serrated carbide for smooth work without seizing - Activteq centre point ensures active cutting in concrete and a precise hole diameter - AWB brazing and hardening technology reduces vibrations during drilling to reduce user strain - 2 cutting edges Technical Data: - nanFor commercial use, please observe the building regulations!
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"