Chisels & Accessories
-
Alpen ALPEN hammer drill Force X Ø 12.0 mm working l.100 mm l.160 mm ( 4000864655 )
Wed, 09/03/2025
Scope of Delivery: - Hammer drill Force X Ø 12.0 mm working l.100 mm l.160 mm Product Description: SDS-plus - 4 solid carbide cutting edges and new progressive spiral design - easy drilling through iron armouring - low-vibration operation and fast drill dust feed - special product advantage: dowel length indicator Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 12.85
-
Alpen ALPEN hammer drill Force X Ø 10.0 mm working l.100 mm l.160 mm ( 4000864650 )
Wed, 09/03/2025
Scope of Delivery: - Hammer drill Force X Ø 10.0 mm working l.100 mm l.160 mm Product Description: SDS-plus - 4 solid carbide cutting edges and new progressive spiral design - easy drilling through iron armouring - low-vibration operation and fast drill dust feed - special product advantage: dowel length indicator Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 11.85
-
Alpen ALPEN hammer drill Force X Ø 10.0 mm working l.200 mm l.260 mm ( 4000864652 )
Wed, 09/03/2025
Scope of Delivery: - Hammer drill Force X Ø 10.0 mm working l.200 mm l.260 mm Product Description: SDS-plus - 4 solid carbide cutting edges and new progressive spiral design - easy drilling through iron armouring - low-vibration operation and fast drill dust feed - special product advantage: dowel length indicator Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 13.86
-
Ruko RUKO Spiralbohrer DIN 338 Typ N Nenn-Ø 5,3 mm ( 4000600173 )
Lieferumfang:Spiralbohrer DIN 338 Typ N Nenn-Ø 5,3 mmProduktbeschreibung:HSS · DIN 338 · Typ N · Spitzenwinkel 118 ° · rechtsschneidend · Kegelmantelanschliff, ab Ø 2,0 mm Kreuzanschliff nach DIN 1412 C · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · für Stahl, Stahlguss legiert und unlegiert (bis 900 N/mm² Festigkeit), Grau-, Temper-, Sphäro- und Druckguss, Sintereisen, Neusilber, Graphit, kurzspanende Aluminiumlegierungen, Messing und Bronze · Leistungsstarker Spiralbohrer, geeignet für alle normalen Bohrarbeiten in allgemein gängigen Werkstoffen Weitere Größen auf Anfrage verfügbar.Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,11mm/U Qualität: profilgeschliffen Nenn-Ø-Toleranz: h8
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 2.9 mm ( 4000600144 )
Wed, 09/03/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 2.9 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.07mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
CHF 10.65
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 19 mm HSS-Co5 ( 4000600111 )
Wed, 09/03/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 19 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 35mmFor commercial use, please observe the building regulations!
CHF 34.10
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 11.5 mm ( 4000600244 )
Wed, 09/03/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 11.5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
CHF 24.89
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 10.5 mm ( 4000600234 )
Wed, 09/03/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 10.5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
CHF 21.27
-
HELLER HELLER hammer drill Trijet Ultimate diameter20xworkingL250xL300mm ( 8000869718 )
Scope of Delivery: - 1x HELLER hammer drill Trijet Ultimate diameter20xworkingL250xL300mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Shank shape: cylindrical - Cutting direction: right - Cutting material: carbide - Angle of the tip: 140°For commercial use, please observe the building regulations!
-
HELLER HELLER hammer drill Trijet Ultimate diameter20xworkingL400xL450mm ( 8000869719 )
Wed, 09/03/2025
Scope of Delivery: - 1x HELLER hammer drill Trijet Ultimate diameter20xworkingL400xL450mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Shank shape: cylindrical - Cutting direction: right - Cutting material: carbide - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 59.97
-
HELLER HELLER hammer drill Trijet Ultimate Diameter18xWorkingL250xL300mm ( 8000869714 )
Scope of Delivery: - 1x HELLER hammer drill Trijet Ultimate diameter18xworkingL250xL300mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Shank shape: cylindrical - Cutting direction: right - Cutting material: carbide - Angle of the tip: 140°For commercial use, please observe the building regulations!
-
HELLER HELLER hammer drill Trijet Ø 16 mm working l.400 mm l.450 mm ( 8000656707 )
Wed, 09/03/2025
Scope of Delivery: - 1x HELLER hammer drill Trijet Ø 16 mm working length 400 mm length 450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
CHF 51.69
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"