Brushes
-
OSBORN osborn nozzle brush ( 4000841344 ) length 300 mm Ø 15 mm fill length 100 mm with eyelet
Sat, 09/27/2025
Scope of Delivery: - 1x OSBORN nozzle brush length 300 mm Ø 15 mm Product Description: ideal for cleaning hard-to-reach areas such as nozzles, glass bottles, hoses, pipes, drill holes and interior surfaces - also suitable for cleaning, dust removal, deburring and paint stripping - with double wire core and eyelet Technical Data: - Material: VA corrugated - Version: with eyelet - Ø: 15 mm - Length: 300 mm - Wire thickness: 0.15 mm - Trimming length: 100 mm - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Material suitability cast iron: conditionally suitable - Material suitability steel: limited suitability - Brand: OSBORNFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 13.90
-
OSBORN osborn nozzle brush ( 4000841287 ) length 300 mm Ø 20 mm fill length 100 mm with eyelet
Sat, 09/27/2025
Scope of Delivery: - 1x OSBORN nozzle brush length 300 mm Ø 20 mm Product Description: ideal for cleaning hard-to-reach areas such as nozzles, glass bottles, hoses, pipes, drill holes and interior surfaces - also suitable for cleaning, dust removal, deburring and paint stripping - with double wire core and eyelet Technical Data: - Material: corrugated steel - Version: with eyelet - Ø: 20 mm - Length: 300 mm - Wire thickness: 0.15 mm - Trimming length: 100 mm - Material suitability aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: OSBORNFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 12.25
-
OSBORN osborn pipe brush Korfil-E ( 4000841156 ) Ø 19 mm 5 mm
Sat, 09/27/2025
Scope of Delivery: - 1x OSBORN pipe brush Ø 19 mm 5 mm Product Description: silicon carbide fill material - galvanised, quadruple wire core with single fill spiral - indispensable brushes for internal machining of non-ferrous metals and hydraulic casting - particularly suitable for deburring cross bores, control parts, O-ring recesses and cylindrical bores on many workpieces - good work results both as a hand tool and when clamped in hand grinders Technical Data: - Ø: 19 mm - Trimming length: 65 mm - Total length: 125 mm - Material suitability INOX: very suitable - Mounting: 5 mm - Material suitability aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: OSBORNFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 12.21
-
OSBORN osborn nozzle brush ( 4000841269 ) length 300 mm Ø 5 mm fill length 100 mm with eyelet
Sat, 09/27/2025
Scope of Delivery: - 1x OSBORN nozzle brush length 300 mm Ø 5 mm Product Description: ideal for cleaning hard-to-reach areas such as nozzles, glass bottles, hoses, pipes, drill holes and interior surfaces - also suitable for cleaning, dust removal, deburring and paint stripping - with double wire core and eyelet Technical Data: - Material: brass - Version: with eyelet - Ø: 5 mm - Length: 300 mm - Wire thickness: 0.08 mm - Trimming length: 100 mm - Material suitability INOX: limited suitability - Material suitability aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: OSBORNFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 13.11
-
OSBORN osborn nozzle brush ( 4000841249 ) length 300 mm Ø 5 mm fill length 100 mm with eyelet
Sat, 09/27/2025
Scope of Delivery: - 1x OSBORN nozzle brush length 300 mm Ø 5 mm Product Description: ideal for cleaning hard-to-reach areas such as nozzles, glass bottles, hoses, pipes, drill holes and interior surfaces - also suitable for cleaning, dust removal, deburring and paint stripping - with double wire core and eyelet Technical Data: - Material: nylon - Version: with eyelet - Ø: 5 mm - Length: 300 mm - Wire thickness: 0.15 mm - Trimming length: 100 mm - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: OSBORNFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 8.90
-
OSBORN osborn nozzle brush ( 4000841271 ) length 320 mm Ø 6 mm fill length 100 mm with eyelet
Sat, 09/27/2025
Scope of Delivery: - 1x OSBORN nozzle brush length 320 mm Ø 6 mm Product Description: ideal for cleaning hard-to-reach areas such as nozzles, glass bottles, hoses, pipes, drill holes and interior surfaces - also suitable for cleaning, dust removal, deburring and paint stripping - with double wire core and eyelet Technical Data: - Material: brass - Version: with eyelet - Ø: 6 mm - Length: 320 mm - Wire thickness: 0.12 mm - Trimming length: 100 mm - Material suitability INOX: limited suitability - Material suitability aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: OSBORNFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 13.05
-
OSBORN osborn nozzle brush ( 4000841267 ) length 300 mm Ø 20 mm fill length 100 mm with eyelet
Sat, 09/27/2025
Scope of Delivery: - 1x OSBORN nozzle brush length 300 mm Ø 20 mm Product Description: ideal for cleaning hard-to-reach areas such as nozzles, glass bottles, hoses, pipes, drill holes and interior surfaces - also suitable for cleaning, dust removal, deburring and paint stripping - with double wire core and eyelet Technical Data: - Material: nylon - Version: with eyelet - Ø: 20 mm - Length: 300 mm - Wire thickness: 0.25 mm - Trimming length: 100 mm - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: OSBORNFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 9.30
-
PFERD PFERD cup brush TBU ST ( 8000435466 ) Ø 50 mm wire thickness 0.3 mm
Sat, 09/27/2025
Scope of Delivery: - 1x PFERD cup brush Ø 50 mm wire thickness 0.3 mm Product Description: Universal for cleaning, derusting and smoothing as well as removing corrosion and paint - Suitable for brushing work on large, flat and easily accessible surfaces - With plastic-coated brush body. Steel wire has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures of up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Drill, straight grinder, flexible shaft drive - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: Wood, cast iron, thermosets, elastomers, thermoplastics, steel, cast steel - Machining tasks: Removing oxide layers, derusting, deburring, paint stripping, cleaning, roughening - Trimming material: Steel wire (ST) - Width: 10mm - Length, fill: 20mm - Length, total: 75mm - Ø outside: 50mm - Ø trim material: 0.3mm - Ø shaft: 6mm - RPM, opt., up to: 7900RPM - RPM, opt., from: 5300RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Advantages: Optimum adaptation to the contour of the workpieces thanks to high flexibility. Long tool life thanks to the use of PFERD special wire. Produces fine surfaces. - RPM, max.: 10500RPM - Ø: 50 mm - Wire thickness: 0.3 mm - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: steel - Shank Ø: 6 mm - Material suitability paint: very suitable - Material suitability wood: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 13.60
-
PFERD PFERD round brush RBU INOX ( 8000433035 ) Ø 20 mm wire thickness 0.2 mm
Sat, 09/27/2025
Scope of Delivery: - 1x PFERD round brush Ø 20 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, drill, straight grinder - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: Soft titanium alloys (tensile strength 500 N/mm²), stainless steel (INOX), titanium alloys, other non-ferrous metals, high-temperature resistant materials, nickel or titanium-based superalloys, nickel-based alloys (e.g. Inconell and Hasteloy), aluminium, bronze, cobalt-based alloys, hard non-ferrous metal, titanium - Machining tasks: Removing oxide layers, paint stripping, removing tarnish, rust removal, deburring, cleaning, roughening - Filament material: Stainless steel wire (INOX) - Length, filament: 3mm - Ø fill material: 0.2mm - Ø shank: 6mm - RPM, opt., up to: 13000RPM - RPM, opt., from: 8000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Produces fine surfaces. Optimum adaptation to the contour of the workpieces thanks to high flexibility. Very good corrosion resistance. - RPM, max.: 20000RPM - Ø: 20 mm - Fill width: 4 mm - Fill length: 37 mm - Wire thickness: 0.2 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 15.65
-
PFERD PFERD hand brush HBG 10 MES ( 8000430766 ) length 265 mm filament length 25 mm
Sat, 09/27/2025
Scope of Delivery: - 1x PFERD hand brush length 265 mm Product Description: Suitable for cleaning work in hard-to-reach areas such as angles, corners and pipes - Brushes with brass wire fill material are suitable for special applications such as surface finishing on copper and brass workpieces - Brass wire (wire quality CuZn37) is softer and more flexible compared to steel wire and can withstand temperatures of up to 180 °C Technical Data: - Drive type: Manual insert - Number, rows: 1 - Pick-up system: Hand - Machinable materials: Other non-ferrous metals - Machining tasks: Cleaning - Length, facing: 25mm - Ø facing material: 0.3mm - Advantages: Works spark-free. - Material: Brass wire (MES) - Length: 265 mm - Wire thickness: 0.3 mm - Trimming length: 25 mm - Brand: PFERD - Total length: 265 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 13.05
-
PFERD PFERD hand brush HBG 10 ST ( 8000430767 ) length 265 mm filament length 25 mm
Sat, 09/27/2025
Scope of Delivery: - 1x PFERD hand brush length 265 mm Product Description: Suitable for cleaning work in hard-to-reach areas such as angles, corners and pipes - Brushes with brass-plated steel wire are suitable for surface treatment and deburring - Brass-coated steel wire is less susceptible to corrosion and can withstand temperatures of up to 300 °C Technical Data: - Drive type: Manual insert - Number, rows: 1 - Pick-up system: Hand - Processing tasks: Cleaning, weld seam processing, roughening, paint stripping, removing oxide layers, derusting - Length, fill: 25mm - Ø facing material: 0.3mm - Advantages: Long service life thanks to the use of PFERD special wire. - Material: Steel wire (ST) - Length: 265 mm - Wire thickness: 0.3 mm - Trimming length: 25 mm - Brand: PFERD - Material suitability paint: very suitable - Total length: 265 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 10.56
-
PFERD PFERD hand brush HBG 10 INOX ( 8000430765 ) length 265 mm filament length 25 mm
Sat, 09/27/2025
Scope of Delivery: - 1x PFERD hand brush length 265 mm Product Description: suitable for cleaning work in hard-to-reach areas such as angles, corners and pipes - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) can withstand temperatures of up to 450 °C. Technical Data: - Drive type: Manual insert - Number, rows: 1 - Mounting system: Hand - Machinable materials: Aluminium, Other non-ferrous metals - Machining tasks: Cleaning, removing oxide layers, derusting, removing annealing colours, paint stripping, roughening, weld seam processing - Length, filament: 25mm - Ø fill material: 0.3mm - Advantages: Very good corrosion resistance. - Material: Stainless steel wire (INOX) - Length: 265 mm - Wire thickness: 0.3 mm - Tipping length: 25 mm - Material suitability for aluminium: very suitable - Brand: PFERD - Total length: 265 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 13.05
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"