Brushes

Show previous products

• 

  PFERD PFERD cup brush POS TBG ST ( 8000435482 ) Ø 65 mm M14 wire thickness 0.5 mm

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD cup brush Ø 65 mm M14 wire thickness 0.5 mm Product Description: for heavy-duty brushing work such as deburring, cleaning, derusting and descaling as well as for removing weld spatter - fill material has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire withstands temperatures of up to 300 °C - M14 Technical Data: - Drive type: Angle grinder - Application recommendation: For optimum results, use on powerful angle grinders. Please observe the recommended speeds. - Number, braids: 18 pieces - Mounting system: Thread - Machinable materials: Steel, cast steel, cast iron - Machining tasks: Rust removal, root seam machining, deburring, cleaning, descaling, removing oxide layers, paint stripping, fillet weld machining, weld seam machining - Cladding material: Steel wire (ST) - Grit size: not specified - Length, fill: 22mm - Ø outside: 65mm - Ø facing material: 0.5mm - Ø thread: M14x2 - RPM, opt., up to: 12500RPM - RPM, opt., from: 6300RPM - Packaging: POS packaging - Advantages: Long service life thanks to the use of PFERD special wire. Aggressive brushing effect due to high rigidity of the wire tufts. - RPM, max.: 12500RPM - Ø: 65 mm - Fill length: 22 mm - Wire thickness: 0.5 mm - Mounting: M14 - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: SteelFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 16.07

• 

  PFERD PFERD round brush RBU INOX ( 8000433050 ) Ø 80 mm wire thickness 0.15 mm

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD round brush Ø 80 mm wire thickness 0.15 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Drill, straight grinder, flexible shaft drive - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: Stainless steel (INOX), titanium alloys, soft titanium alloys (tensile strength 500 N/mm²), titanium, aluminium, cobalt-based alloys, other non-ferrous metals, bronze, high-temperature materials, nickel-based alloys (e.g. Inconell and Hasteloy), hard non-ferrous metal, nickel or titanium-based superalloys - Machining tasks: Cleaning, deburring, derusting, removing annealing colours, removing oxide layers, paint stripping, roughening - Filament material: Stainless steel wire (INOX) - Length, filament: 19mm - Ø fill material: 0.15mm - Ø shaft: 6mm - RPM, opt., up to: 7800RPM - RPM, opt., from: 4800RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Produces fine surfaces. Optimum adaptation to the contour of the workpieces thanks to high flexibility. Very good corrosion resistance. - RPM, max.: 12000RPM - Ø: 80 mm - Fill width: 15 mm - Fill length: 50 mm - Wire thickness: 0.15 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 22.48

• 

  PFERD PFERD round brush RBU INOX ( 8000433037 ) Ø 30 mm wire thickness 0.2 mm

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD round brush Ø 30 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, flexible shaft drive, drill - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: High temperature materials, nickel-based alloys (e.g. Inconell and Hasteloy), aluminium, bronze, hard non-ferrous metal, cobalt-based alloys, nickel or titanium-based superalloys, other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), stainless steel (INOX), titanium, titanium alloys - Machining tasks: Cleaning, roughening, paint stripping, removing oxide layers, removing annealing colours, derusting, deburring - Filament material: Stainless steel wire (INOX) - Length, filament: 7mm - Ø fill material: 0.2mm - Ø shank: 6mm - RPM, opt., up to: 13000RPM - RPM, opt., from: 8000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Optimum adaptation to the contour of the workpieces thanks to high flexibility. Produces fine surfaces. Very good corrosion resistance. - RPM, max.: 20000RPM - Ø: 30 mm - Fill width: 9 mm - Filament length: 42 mm - Wire thickness: 0.2 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 14.39

• 

  PFERD PFERD round brush RBU ST ( 8000433012 ) Ø 30 mm wire thickness 0.2 mm

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD round brush Ø 30 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - steel wire trim material has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, drilling machine, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Mounting system: Shank - Machinable materials: Thermoplastics, cast iron, thermosets, steel, cast steel, wood, elastomers - Machining tasks: Paint stripping, cleaning, deburring, removing oxide layers, roughening, rust removal - Filament material: Steel wire (ST) - Length, filament: 7mm - Ø fill material: 0.2mm - Ø shank: 6mm - RPM, opt., up to: 15000RPM - RPM, opt., from: 10000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Long tool life thanks to the use of PFERD special wire. Produces fine surfaces. Optimum adaptation to the contour of the workpieces thanks to high flexibility. - RPM, max.: 20000RPM - Ø: 30 mm - Fill width: 9 mm - Fill length: 42 mm - Wire thickness: 0.2 mm - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mm - Material suitability wood: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 12.69

• 

  PFERD PFERD round brush RBU ST ( 8000433021 ) Ø 70 mm wire thickness 0.3 mm

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD round brush Ø 70 mm wire thickness 0.3 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - steel wire trim material has high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, drilling machine, straight grinder - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Mounting system: Shank - Machinable materials: Wood, thermoplastics, steel, cast steel, elastomers, thermosets, cast iron - Machining tasks: Deburring, derusting, removing oxide layers, paint stripping, roughening, cleaning - Filament material: Steel wire (ST) - Length, filament: 19mm - Ø fill material: 0.3mm - Ø shank: 6mm - RPM, opt., up to: 11300RPM - RPM, opt., from: 7500RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Produces fine surfaces. Long tool life thanks to the use of PFERD special wire. Optimum adaptation to the contour of the workpieces thanks to high flexibility. - RPM, max.: 15000RPM - Ø: 70 mm - Fill width: 15 mm - Fill length: 50 mm - Wire thickness: 0.3 mm - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mm - Material suitability wood: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 13.58

• 

  PFERD PFERD round brush RBG ( 8000433112 ) Ø 125 mm wire thickness 0.5 mm

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD round brush Ø 125 mm wire thickness 0.5 mm Product Description: knotted wire - aggressive brush - suitable for heavy-duty brushing work in metal construction such as descaling, derusting, deburring, cleaning weld seams and removing adhesive residue - 22.2 mm Ø hole Technical Data: - Drive type: Angle grinder, straight grinder, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For optimum results, use on powerful angle grinders. - Machinable materials: Steel, cast steel, cast iron - Machining tasks: Weld seam processing, cleaning, deburring, derusting, descaling, removing oxide layers, root seam processing, paint stripping, fillet weld processing - Trimming material: Steel wire (ST) - Width: 12mm - RPM, opt., up to: 12500RPM - RPM, opt., from: 5500RPM - Packaging: POS packaging - Advantages: Long service life thanks to the use of PFERD special wire. Aggressive brushing effect due to high rigidity of the wire tufts. - Ø: 125 mm - Fill width: 12 mm - Fill length: 28 mm - Wire thickness: 0.5 mm - Number of tufts: 24 - max. speed: 12500 min-¹ - Content: 1 pc. - Material suitability cast iron: very suitable - Bore: 22.2 mm - Material suitability steel: very suitable - Brand: PFERD - Material: SteelPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 22.53

• 

  PFERD PFERD round brush RBU INOX ( 8000433046 ) Ø 70 mm wire thickness 0.15 mm

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD round brush Ø 70 mm wire thickness 0.15 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shank Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, drill, straight grinder - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: Bronze, titanium, cobalt-based alloys, hard non-ferrous metals, high-temperature materials, other non-ferrous metals, nickel or titanium-based superalloys, soft titanium alloys (tensile strength 500 N/mm²), stainless steel (INOX), titanium alloys, aluminium, nickel-based alloys (e.g. Inconell and Hasteloy) - Machining tasks: Removing annealing colours, roughening, cleaning, deburring, removing oxide layers, derusting, paint stripping - Filament material: Stainless steel wire (INOX) - Length, filament: 19mm - Ø fill material: 0.15mm - Ø shaft: 6mm - RPM, opt., up to: 9800RPM - RPM, opt., from: 6000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Optimum adaptation to the contour of the workpieces thanks to high flexibility. Very good corrosion resistance. Produces fine surfaces. - RPM, max.: 15000RPM - Ø: 70 mm - Fill width: 15 mm - Filament length: 50 mm - Wire thickness: 0.15 mm - Material suitability INOX: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mm - Material suitability lacquer: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 21.82

• 

  PFERD PFERD brush PBUR INOX ( 8000432670 ) Ø 13 mm wire thickness 0.2 mm 15000 min-¹

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD brush Ø 13 mm wire thickness 0.2 mm Product Description: suitable for light brushing work such as deburring, cleaning and derusting - brush with plastic-coated brush body - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX) - such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shaft Ø 6 mm Technical Data: - Drive type: Drill, flexible shaft drive, straight grinder - Application recommendation: For particularly flexible use, for a large expansion diameter or to reach hard-to-reach areas, remove the support ring at the start of work. For best performance, use a tool drive with at least 300 watts. Remove the support ring as soon as the trimming has been processed up to the support ring. This allows the remaining trim to be released and fully utilised. Please observe the recommended speeds. - Machinable materials: Titanium alloys, soft titanium alloys (tensile strength 500 N/mm²), bronze, aluminium, nickel-based alloys (e.g. Inconell and Hasteloy), cobalt-based alloys, hard non-ferrous metals, stainless steel (INOX), titanium, other non-ferrous metals, nickel or titanium-based superalloys, high-temperature materials - Machining tasks: Roughening, paint stripping, removing oxide layers, removing tarnish, derusting, deburring, cleaning - Filament material: Stainless steel wire (INOX) - Length, tipping to ring: 13mm - Ø shaft: 6mm - Ø cup: 16mm - RPM, opt., up to: 9800RPM - RPM, opt., from: 6000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Advantages: Very good corrosion resistance. Once the fill has been worked down to the support ring, it can be removed for further use without changing the brushing behaviour. The plastic coating prevents the risk of contact corrosion. Optimum access to hard-to-reach areas such as recesses and drill holes. Spreading and flexibility of the brush fill can be precisely adjusted using the support ring. The support ring prevents the wires from moving sideways. The brush is degreased and leaves no oil residue on the workpiece. Produces fine surfaces. - Ø: 13 mm - Filament length: 25 mm - Wire thickness: 0.2 mm - Total length: 70 mm - Max. speed: 15000 min-¹ - Content: 10 pcs. - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 14.58

• 

  PFERD PFERD brush PBU ST ( 8000432589 ) Ø 10 mm wire thickness 0.35 mm 20000 min-¹

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD brush Ø 10 mm wire thickness 0.35 mm Product Description: for light brushing work such as deburring, cleaning and derusting - the steel wire fill material has a high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications. Steel wire can withstand temperatures up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, drilling machine, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Machinable materials: Cast iron, elastomers, steel, cast steel, wood - Machining tasks: Rust removal, roughening, paint stripping, removing oxide layers, deburring, cleaning - Trimming material: Steel wire (ST) - Ø shaft: 6mm - Ø cup: 10mm - RPM, opt., up to: 15000RPM - RPM, opt., from: 10000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Produces fine surfaces. Long service life thanks to the use of PFERD special wire. Optimum access to hard-to-reach areas such as drill holes and cavities by spreading the filament during rotation. - Ø: 10 mm - Fill width: 0.35 mm - Fill length: 20 mm - Wire thickness: 0.35 mm - Total length: 65 mm - max. speed: 20000 min-¹ - Content: 10 pcs. - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mm - Material suitability wood: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 10.20

• 

  PFERD PFERD brush PBU ST ( 8000432595 ) Ø 20 mm wire thickness 0.5 mm 18000 min-¹

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD brush Ø 20 mm wire thickness 0.5 mm Product Description: for light brushing work such as deburring, cleaning and derusting - the steel wire fill material has a high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications. Steel wire can withstand temperatures up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, drilling machine, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Machinable materials: Elastomers, wood, steel, cast steel, cast iron - Machining tasks: Roughening, cleaning, deburring, derusting, removing oxide layers, paint stripping - Filament material: Steel wire (ST) - Ø shaft: 6mm - Ø cup: 22mm - RPM, opt., up to: 13500RPM - RPM, opt., from: 9000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Produces fine surfaces. Long service life thanks to the use of PFERD special wire. Optimum access to hard-to-reach areas such as drill holes and cavities by spreading the filament during rotation. - Ø: 20 mm - Fill width: 0.5 mm - Fill length: 25 mm - Wire thickness: 0.5 mm - Total length: 70 mm - Max. speed: 18000 min-¹ - Content: 10 pcs. - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mm - Material suitability wood: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 11.30

• 

  PFERD PFERD brush PBU INOX ( 8000432617 ) Ø 20 mm wire thickness 0.2 mm 18000 min-¹

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD brush Ø 20 mm wire thickness 0.2 mm Product Description: for light brushing work such as deburring, cleaning and derusting - brush with plastic-coated brush body - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A - shaft Ø 6 mm Technical Data: - Drive type: Drill, straight grinder, flexible shaft drive - Application recommendation: For particularly flexible use, for a large expansion diameter or to reach hard-to-reach areas, remove the support ring at the start of work. Remove the support ring as soon as the trimming has been processed up to the support ring. This allows the remaining fill to be released and fully utilised. For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Machinable materials: Nickel or titanium-based superalloys, titanium alloys, titanium, stainless steel (INOX), other non-ferrous metals, nickel-based alloys (e.g. Inconell and Hasteloy), high-temperature resistant materials, hard non-ferrous metals, cobalt-based alloys, bronze, aluminium, soft titanium alloys (tensile strength 500 N/mm²) - Machining tasks: Removing annealing colours, roughening, removing oxide layers, derusting, deburring, cleaning, paint stripping - Trimming material: Stainless steel wire (INOX) - Ø shaft: 6mm - Ø cup: 22mm - RPM, opt., up to: 11700RPM - RPM, opt., from: 7200RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: The brush is degreased and leaves no oil residue on the workpiece. Very good corrosion resistance. Produces fine surfaces. Spreading and flexibility of the brush fill can be precisely adjusted using the support ring. Optimum access to hard-to-reach areas such as recesses and drill holes. Once the fill has been worked down to the support ring, it can be removed for further use without changing the brushing behaviour. The plastic coating prevents the risk of contact corrosion. The support ring prevents the wires from moving sideways. - Ø: 20 mm - Fill width: 0.2 mm - Wire length: 25 mm - Wire thickness: 0.2 mm - Total length: 70 mm - Max. speed: 18000 min-¹ - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 14.57

• 

  PFERD PFERD brush PBGS INOX ( 8000432690 ) Ø 10 mm wire thickness 0.35 mm 10000 min-¹

  Sat, 11/15/2025

  Scope of Delivery: - 1x PFERD brush Ø 10 mm wire thickness 0.35 mm Product Description: flexible single-knot brush with plastic-coated brush body - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX) - such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shaft Ø 6 mm Technical Data: - Drive type: Straight grinder, flexible shaft drive, drilling machine - Application recommendation: For optimum results, use on variable-speed tool drives. For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Machinable materials: Titanium alloys, aluminium, bronze, cobalt-based alloys, hard non-ferrous metals, high-temperature materials, nickel-based alloys (e.g. Inconell and Hasteloy), nickel or titanium-based superalloys, other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), stainless steel (INOX), titanium - Machining tasks: Weld seam processing, root seam processing, cleaning, paint stripping, fillet weld processing, removing oxide layers, removing tarnish, descaling, derusting, deburring - Trimming material: Stainless steel wire (INOX) - Ø shaft: 6mm - Ø cup: 10mm - RPM, opt., up to: 6500RPM - RPM, opt., from: 4000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Optimum access to hard-to-reach areas such as inside corners, as the plait does not untwist. Very good corrosion resistance. The brush is degreased and leaves no oil residue on the workpiece. The plastic coating prevents the risk of contact corrosion. - Ø: 10 mm - Filament width: 0.35 mm - Filament length: 25 mm - Wire thickness: 0.35 mm - Total length: 65 mm - max. speed: 10000 min-¹ - Content: 10 pcs. - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 13.65

Show more products