Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

Direkt ist günstiger für Dich!Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Bestseller

25001 products

  • Impact protection ( 4000818902 ) rubber 0.15 kg red

    HP AUTOZUBEHÖR Impact protection ( 4000818902 ) rubber 0.15 kg red

    Fri, 12/05/2025

    Scope of Delivery: - 1x HP AUTO ACCESSORIES Impact protection rubber Product Description: Effective protection against scratching the rear of the vehicle when coupling and uncoupling - Suitable for all standard tow ball couplings - SB packed Technical Data: - Material: Rubber - Weight: 0,15 kg - Width: 12 cm - Length: 18.5 cm - Colour: red - Height: 5.5 cm - Brand: HP AUTOZUBEHÖRFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 13.69

  • NORRES NEO 390 TWO suction and blower hose inner Ø 100-102 mm ( 4501400629 )

    NORRES NORRES NEO 390 TWO suction and blower hose inner Ø 100-102 mm ( 4501400629 )

    Fri, 12/05/2025

    Scope of Delivery: - 1x NORRES suction and blower hose NEO 390 TWO inner Ø 100-102 mm Product Description: Applications: flexible hose for hot and cold gases, granulate dryer/plastic dryer, hot air dryer, film blowing system, cooling air on extrusion tool, cooling air: UV dryer, IR/infrared dryer, bus, commercial vehicle, caravan, motorhome, boat, ship, yacht: ventilation, heating Properties: thread-reinforced, very good heat resistance, RoHS compliant Construction: 1. spring steel wire embedded in the wall, 2. fabric-reinforced tape, wall: Neoprene-coated glass fabric, 3. cord as reinforcement Temperature range: -35°C to 135°C, briefly up to 150°C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 56.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 297.54

  • NORRES NEO 390 TWO suction and blower hose inner Ø 50-51 mm ( 4501400622 )

    NORRES NORRES NEO 390 TWO suction and blower hose inner Ø 50-51 mm ( 4501400622 )

    Fri, 12/05/2025

    Scope of Delivery: - Suction and blower hose NEO 390 TWO Inner Ø 50-51 mm Product Description: Applications: flexible hose for hot and cold gases, granulate dryer/plastic dryer, hot air dryer, film blowing system, cooling air on extrusion tool, cooling air: UV dryer, IR/infrared dryer, bus, commercial vehicle, caravan, motorhome, boat, ship, yacht: ventilation, heating Properties: thread-reinforced, very good heat resistance, RoHS compliant Construction: 1. spring steel wire embedded in the wall, 2. fabric-reinforced tape, wall: Neoprene-coated glass fabric, 3. cord as reinforcement Temperature range: -35°C to 135°C, briefly up to 150°C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 31.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 186.69

  • GAH Alberts throw hanger ( 8001893360 ) length 600 x 101 mm width 63 x 45 mm galvanised thick-layer passivated

    GAH GAH Alberts throw hanger ( 8001893360 ) length 600 x 101 mm width 63 x 45 mm galvanised thick-layer passivated

    Fri, 12/05/2025

    Scope of Delivery: - 1x GAH throw hanger length 600 x 101 mm width 63 x 45 mm Product Description: with riveted pin - material: raw steel, surface: galvanised, thick-film passivated Technical Data: - Surface: galvanised, thick-film passivated - Dimension c: 63mm - Dimension d: 45mm - Dimension a: 600mm - Dimension b: 101mm - Number of holes: 6 / 2 - Hole Ø: 6 / 9 x 9 mm - Thickness: 3.75 mm - Width: 63 x 45 mm - Length: 600 x 101 mm - Material: Steel - Brand: GAHFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 15.32

  • LA-KA-PE insert box 80 x 53 x 54 mm ( 9000449725 )

    LA-KA-PE LA-KA-PE insert box 80 x 53 x 54 mm ( 9000449725 )

    Fri, 12/05/2025

    Scope of Delivery: - Insert box 80 x 53 x 54 mm Product Description: High-impact polystyrene - Colour blue - Height 54 mm - Areas of application: drawers, drawer cabinets, assortment boxes and empty cases Technical Data: - Height: 54mmFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 22.24

  • MAS strap energy absorber connector Tyger Twin length 1.5 m ( 4000385155 )

    MAS MAS strap energy absorber connector Tyger Twin length 1.5 m ( 4000385155 )

    Fri, 12/05/2025

    Scope of Delivery: - Tyger Twin strap energy absorber connector Length 1.5 m Product Description: EN 354, EN 355 - with webbing 27 mm wide - the shock absorber reduces the impact forces far below the permitted maximum values (600 kg) - this version is supplied with two scaffold tube hooks (in accordance with EN 362) with an opening width of 65 mm at the end of the webbing to ensure quick and safe attachment during the climbing process - in the event of a fall, the interwoven webbings are opened and evenly absorb the forces that occur - areas of application: the webbing fall arrest lanyard is primarily intended for the climbing area, whereby the user can secure himself against falling by means of the two outgoing webbing straps alternately during ascent or descent; when working, both webbing ends must be hooked into the anchor point These products are tested and approved for vertical and horizontal use with an expected load from a fall over the edge. Technical Data: - Application: edge-tested - Service life max./years: 10 - subject to inspection: yesFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 105.71

  • HELIT brochure holder H540xW280xD80mm ( 9000493710 )

    HELIT HELIT brochure holder H540xW280xD80mm ( 9000493710 )

    Fri, 12/05/2025

    Scope of Delivery: - Leaflet holder H540xW280xD80mm - Delivery without brochures Product Description: for wall mounting - with four compartments - polypropylene side panel - polystyrene pockets allow a full view of the documents - easy wall mounting (mounting material included) Technical Data: - nanFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 32.29

  • KS TOOLS Bodenständer für Putz-Papierrolle ( 800.0158 ) - Toolbrothers

    KS Tools KS TOOLS Bodenständer für Putz-Papierrolle ( 800.0158 )

    Fri, 12/05/2025

    Produktbeschreibung:Bodenständer für Putz-Papierrolle · Bodenständer für Putz-PapierrolleMerkmale: für alle gängigen Putz-Papierrollen Rollenaufnahme von max. 300 mm Breite stabiler Stahlrohrrahmen Technische Daten: - Breite in mm: 390,0 mm - Farbe: schwarz - Gewicht [g]: 2140 g - Herstellernummer: 800.0158 - Höhe in mm: 735.0 mm - Maße mm: 350 x 735 x 390 mm mm - Material1: Stahlrohr - Tiefe in mm: 350.0 mm

    1 - 2 business days

    CHF 49.46

  • WST flat sealing tape 4360 L10 mxW14 mm ( 4566600433 )

    WST WST flat sealing tape 4360 L10 mxW14 mm ( 4566600433 )

    Fri, 12/05/2025

    Scope of Delivery: - 1x WST flat sealing tape 4360 L10 mxW14 mm Product Description: can also be used as a seal under high chemical loads and temperatures - on a space-saving roll - high chemical resistance - no ageing - weather and light resistant - efficient sealing of uneven surfaces - minimised downtimes - easy installation - self-adhesive on one side Area of application: universally applicable in plant and apparatus engineering (as an assembly aid), food production, medical technology, pharmaceutical and biotechnology, flue gas systems, power plant and supply lines, chemical and paint industry, sight glasses, etc Material: 100% virgin, expanded PTFE (soft, flexible) Application temperature: from -240 °C to +270 °C (briefly up to +315 °C) Approvals/approvals: Physiologically harmless, no inherent taste, no inherent odour, cannot be attacked or decomposed by microorganisms. The requirements of FDA Directive 21CFR 177.1550 and EU Regulation No. 1935/2004 are fulfilled Technical Data: - Material: PTFEFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 43.10

  • LA-KA-PE Open-fronted storage box LK L350/300xW200xH150mm ( 9000449050 )

    LA-KA-PE LA-KA-PE Open-fronted storage box LK L350/300xW200xH150mm ( 9000449050 )

    Fri, 12/05/2025

    Scope of Delivery: - Open fronted storage box LK L350/300xW200xH150mm Product Description: made of high-impact polystyrene - stackable - highly stable - in the colours red, green and blue - different sizes for individual requirements - size 1A with reinforcement bar Technical Data: - Length: 350/300mmFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 55.17

  • MAS Overhead fall arrester MAS SK 12 EN353-2 ( 4000385105 )

    MAS MAS Overhead fall arrester MAS SK 12 EN353-2 ( 4000385105 )

    Fri, 12/05/2025

    Scope of Delivery: - Guided type fall arrester MAS SK 12 EN353-2 - These products are tested and approved for vertical and horizontal use with an expected load from a fall over the edge. Product Description: EN 352-2 - free-running fall arrester with sewn-on shock absorber, which reduces the impact forces that occur during a fall - the device is only supplied complete with Ø 12 mm kernmantle rope - primarily used in the climbing area so that the user has both arms free, e.g. to transport material or if the anchor point is further away from the workplace Technical Data: - Standard: EN353-2 - Service life max./years: 4-6 - subject to testing: yesFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 104.37

  • NORRES suction and blower hose SIL 391 ONE inner Ø 57 mm ( 4501400643 )

    NORRES NORRES suction and blower hose SIL 391 ONE inner Ø 57 mm ( 4501400643 )

    Fri, 12/05/2025

    Scope of Delivery: - Suction and blower hose SIL 391 ONE inner Ø 57 mm Product Description: Applications: flexible hose for hot and cold gases, granulate dryer/plastic dryer, hot air dryer, film blowing system, cooling air on extrusion tool, cooling air: UV dryer, IR/infrared dryer, clean room ventilation, semiconductor manufacturing machine Properties: filament-reinforced, highly flexible, very good heat resistance, RoHS compliant Construction: 1. Construction: 1. spring steel wire, 2. fabric-reinforced tape, wall: silicone-coated glass fabric, 3. cord as reinforcement Temperature range: -70°C to 260°C, briefly up to 280°C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 33.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 158.78


I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"

Log in

Forgot your password?

Don't have an account yet?
Create account