Best sellers for the week

Show previous products

• 

  NORRES NORRES suction hose CP HiTex 481 400 mm 414.00 mm ( 4501403888 )

  Sun, 12/07/2025

  Scope of Delivery: - Suction hose CP HiTex 481 400 mm 414.00 mm Product Description: High-temperature hose, clamping profile hose, double-layered (up to +700°C) Applications: - Flexible hose for hot and cold gases - Exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reel, suction slot duct, above-floor extraction system, under-floor extraction system - Engine test bench, exhaust gas measurement - High-temperature extraction: Furnace, foundry, blast furnace, smelter, ceramics industry, glass industry, steelworks, aluminium smelter - bellows, expansion joint Properties: very good for flying sparks and welding spatter - abrasion protection due to external clamping profile - tension-resistant clamping of the wall in the clamping profile - very good heat resistance - flame-retardant in accordance with: DIN 4102-B1 - RoHS compliant Temperature range: -60°C to 600°C - briefly up to 700°C Technical Data: - Bending radius: 173.00mm - Weight: 5,50kg/m - Physical state: GaseousFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 6,040.26

• 

  NORRES NORRES suction hose CP HiTex 481 inner Ø 350 mm ( 4501400490 )

  Sun, 12/07/2025

  Scope of Delivery: - Suction hose CP HiTex 481 inner Ø 350 mm Product Description: Applications: flexible hose for hot and cold gases, exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reels, suction slot ducts, above-floor/under-floor extraction systems, engine test benches, exhaust gas measurement, high-temperature extraction: Furnaces, foundries, blast furnaces, smelters, ceramics industry, glass industry, steelworks, aluminium smelters, bellows, expansion joint Properties: very good against flying sparks and welding spatter, abrasion protection due to external clamping profile, tension-resistant clamping of the wall in the clamping profile, very good heat resistance, flame-retardant in accordance with: DIN 4102-B1, RoHS compliant Construction: 1. clamping profile support spiral: completely stainless steel (INOX), 2. double-layer wall, wall: inside and outside reinforced with stainless steel wires and specially coated glass fabric Temperature range: -60 °C to 600 °C, briefly up to 700 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 153.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 2,688.61

• 

  SILBERSCHNITT SILVER CUT glass cutter for glass thicknesses from 3 - 6 mm ( 4000817200 )

  Sun, 12/07/2025

  Scope of Delivery: - Glass cutter for glass thicknesses from 3 - 6 mm Product Description: with 6 cutting wheels - made of stainless steel with special hardening - with flat wooden handle - ruler spacing 2.5 mm Technical Data: - Handle: flat wooden handle - Wheels: 6 pieces made of stainless steelFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 12.05

• 

  SOPPEC Soppec marking chalk ( 4000354933 ) red

  Sun, 12/07/2025

  Scope of Delivery: - 1x SOPPEC marking chalk red Product Description: wax-based - for weather-resistant markings on any surface: metal, dry or damp wood, cardboard, brick, asphalt, plastic - strong colour intensity, very good visibility - box of 12 pieces of chalk Technical Data: - Ø: 12mm - Colour: red - Length: 120 mm - Shape: hexagonal - Brand: SOPPEC - Design: unpaperedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 13.00

• 

  PRESSOL Pressol pressurised sprayer ( 4202406050 ) 1 l

  Sun, 12/07/2025

  Scope of Delivery: - 1x PRESSOL pressurised sprayer 1 l Product Description: suitable for water - not suitable for acetone, glycol, ammonia, brake cleaner and acids, e.g. formic and acetic acid, as well as chemicals - manual pressure build-up - atomiser head with adjustable and lockable brass nozzle Technical Data: - Design: PE plastic - Capacity: 1 litre - Brand: PRESSOLFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 21.96

• 

  SCHWAN Schwan Werkzeuge Tyrolean trowel ( 4000816837 ) length 295 mm width 115 mm hardened stainless steel

  Sun, 12/07/2025

  Scope of Delivery: - 1x SCHWAN Tyrolean trowel Length 295 mm Width 115 mm Product Description: Suitable for bricklaying, plastering and tiling work - perfect for working with materials such as mortar and plaster Technical Data: - Length: 295 mm - Handle finish: lacquered wood - Neck: S-shape - Blade: hardened stainless steel - Width: 115 mm - Design: Wooden handle, S-neck - Material: Stainless steel - Brand: SCHWANFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 126.79

• 

  PFERD PFERD mounted point STEEL EDGE D25xH25mm 6 mm ( 4143100025 )

  Sun, 12/07/2025

  Scope of Delivery: - Mounted point STEEL EDGE D25xH25mm 6 mm Product Description: Suitable for use on edges and for deburring work on steel and cast steel components, as well as for grinding chamfers and grinding contours Technical Data: - nanFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 32.48

• 

  ANSMANN Ansmann button cell ( 4000901780 ) 1.55 V 133 mAh 11.6 x 5.4 mm

  Sun, 12/07/2025

  Scope of Delivery: - 1x ANSMANN button cell 1.55 V 133 mAh Product Description: Low self-discharge - high energy density and good temperature behaviour characterise these long-life batteries Technical Data: - Pcs. per blister: 1 - Dimensions: 11.6 x 5.4mm - Voltage: 1.55 V - Capacity: 133 mAh - W. ref.: SR1154 - IEC: SR44 - Brand: ANSMANNNote on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 22.00

• 

  NORRES NORRES AIRDUC(R) PUR 350 FOOD-AS suction and delivery hose inner Ø 120 mm ( 4501401128 )

  Sun, 12/07/2025

  Scope of Delivery: - AIRDUC® PUR 350 FOOD-AS suction and delivery hose Inner Ø 120 mm Product Description: Applications: flexible hose for abrasive powder, bulk material, granulate, gases, conveying of dry and frozen food and pharmaceuticals, mixer, dryer, packaging machine, big bag filling/emptying, mill, potentially explosive area, clean room ventilation, semiconductor manufacturing machine, paper industry: waste water, exhaust air, medical technology, healthcare: Cable protection, air and suction hose, municipal vehicle: lawn mower, embankment mower, leaf vacuum/leaf collector Properties: medium-weight design, highly abrasion-resistant, food-safe wall acc: FDA FCN 21 CFR 177.1680 and 177.2600, odourless and tasteless, resistant to microbes and hydrolysis, good resistance to oil, petrol and chemicals, very good low-temperature flexibility, wall permanently antistatic: volume resistance and surface resistance Construction: 1. Wall: permanently antistatic premium ether polyurethane (Pre-PUR ® ), 3. wall thickness approx. 0.7 mm Temperature range: -40 to 90 °C, briefly up to 125 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 80.00mm - Physical state: Solid / gaseous - OverpressureDIN 26057(50% elongation)(bar): 0.530 (1.17) - Negative pressureDIN 26057(axially fixed)(bar): 0.115 (0.46)For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 308.73

• 

  AEG AEG angle screw attachment WB 1 1/4 ″ hexagonal ( 4000894499 )

  Sun, 12/07/2025

  Scope of Delivery: - Angled screwdriver attachment WB 1 1/4 ″ hexagonal - 10 bits Product Description: for all screwdriving applications in tight and hard-to-reach places - corner dimension 30 mm fits all machines - 1/4″ hexagonal bit holder magnetic - for all standard bits - gear made of specially hardened steel - handle 360° rotatable-adjustable - industrial quality - 400 rpm Technical Data: - Receptacle mm: 6.3mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 31.67

• 

  NORRES NORRES PROTAPE(R) PUR 301 AS suction and blower hose inner Ø 50-51 mm ( 4501400770 )

  Sun, 12/07/2025

  Scope of Delivery: - PROTAPE® PUR 301 AS suction and blower hose Inner Ø 50-51 mm Product Description: Applications: flexible hose for gases, abrasive dusts, powders, fibres, extraction, dedusting and filter systems, oil mist, paint vapour and chemical vapour extraction, extraction arm, gas pendulum hose on loading arm, potentially explosive areas, animal stable ventilation, bus, caravan, ship, yacht: Ventilation, heating, clean room ventilation, semiconductor manufacturing machine, bellows, expansion joint Properties: super lightweight design, highly flexible + compressible 3:1, abrasion-resistant, microbe-resistant, good resistance to oil, petrol and chemicals, very good flexibility at low temperatures, flame retardant acc: DIN 4102-B1, flame retardant acc: UL94-HB, wall permanently antistatic: contact resistance and surface resistance Construction: 1. spring steel wire embedded in the wall, 2. wall: permanently antistatic premium ester polyurethane (Pre-PUR ® ), 3. wall thickness approx. 0.4 mm Temperature range: -40 °C to 90 °C (briefly up to 125 °C) Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 33.00mm - Physical state: Gaseous - OverpressureDIN 26057(50% elongation)(bar): 0.480 (1.42) - Negative pressureDIN 26057(axially fixed)(bar): 0.170 (0.85)For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 53.42

• 

  NÖLLE Nölle varnishing roller superfine ( 4000817588 ) width 100 mm rounding straight

  Sun, 12/07/2025

  Scope of Delivery: - 1x NÖLLE varnishing roller width 100 mm Product Description: extra dense polyurethane foam - for particularly even and fine varnishing - straight on both sides Technical Data: - Core Ø: 35 mm - Width: 100 mm - Bracket-Ø: for 6 mm - Content: 10 pieces / pack - Material: Polyurethane foam - Property: Straight rounding - Brand: NÖLLEFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 11.78

Show more products