Best sellers for the week
-
BMI BMI folding rule 1041 length 1 m ( 4000853016 )
Wed, 09/03/2025
Scope of Delivery: - Sectional scale 1041 Length 1 m Product Description: made of white plastic - with black graduation pattern - riveted metal hinge springs - EC accuracy class III Technical Data: - Number of links: 10 - Colour: white - Accuracy: EG IIIFor commercial use, please observe the building regulations!
CHF 12.01
-
Ruko RUKO twist drill DIN 345 type N nominal Ø 26 mm ( 4000601329 )
Wed, 09/03/2025
Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 26 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK3 - Quality: profile groundFor commercial use, please observe the building regulations!
CHF 55.52
-
Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000602977 ) nominal Ø 8 mm 117 mm 5xD right-hand cutting
Wed, 09/03/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 8 mm Product Description: HSS - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Nominal Ø tolerance: h8 - Overall length: 117mm - Coating: bright/burnished - Nominal Ø: 8 mm - Overall length: 117 mm - Spiral length: 75 mm - Shank design: 3-face shank - Point angle: 118 ° - Receptacle Ø: 8 mm - Type: N - Standard: DIN 338 - Cutting material: HSS - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 34.71
-
NORRES NORRES suction and blower hose CP PTFE_HYP-INOX 472 EC 140 mm 152.00 mm ( 4501403686 )
Wed, 09/03/2025
Scope of Delivery: - 1x NORRES suction and blower hose CP PTFE_HYP-INOX 472 EC 140 mm 152.00 mm Product Description: Electrically conductive clamping profile hose, double-layered, highly resistant to chemicals (up to +170°C) Applications: - flexible hose for hot and cold gases and for dusts, powders, fibres - chemical industry: chemical vapours, vapour recovery hose on loading arm, paint vapours, paint mist extraction - potentially explosive areas Properties: abrasion protection due to outer clamping profile - tensile clamping of the wall in the clamping profile - highly flexible + compressible 4:1 - very good heat resistance - anti-adhesive - good alkali and acid resistance - extremely good chemical resistance - surface resistance PTFE film Technical Data: - Bending radius: 36.00mm - Weight: 1.59kg/m - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 532.80
-
SPRINGER Springer screw connection EN 10226-1 ( 4000000326 ) NPS=1/2 ″ L 53 mm L1=14 mm L2=15 mm
Wed, 09/03/2025
Scope of Delivery: - 1x SPRINGER screw connection NPS=1/2 ″ Product Description: Female/male thread - thread EN 10226-1 - ISO 7-1 - conical sealing AISI 316/1.4408/V4A - pressure recommendation max. 20 bar/at +20 °C Technical Data: - L2: 15mm - L1: 14mm - L: 53mm - NPS: 1/2 ″ - DN: 15 mm - SW: 35 mm - SW1: 24 mm - Weight: 0,109 kg - Brand: SPRINGER - Design: 312A, conical sealing - Material: AISI316/1.4408/V4For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 60.70
-
tesa TESA crepe tape tesakrepp(R) 4319 heavily creped ( 3000265452 )
Wed, 09/03/2025
Scope of Delivery: - 1x TESA crepe tape tesakrepp® 4319 heavily creped Product Description: for very good bonding of curves - heavily creped paper adhesive tape - with high adhesive strength even on rough substrates - conformable - well suited for three-dimensional substrates - adhesive: natural rubber - total thickness: 0.375 mm - adhesive strength: 4.5 N/cm - tear strength: 28 N/cm - elongation at break: 58 % Technical Data: - Colour: light brown - Total thickness: 0,375mm - Tear strength: 28N/cm - Adhesive strength: 4.5N/cmFor commercial use, please observe the building regulations!
CHF 82.97
-
REILANG REILANG 3-piece funnel set ( 4000356419 )
Wed, 09/03/2025
Scope of Delivery: - Funnel set 3-piece Product Description: Set contents: 2 litre filler, 200 mm funnel, 250 mm flexible hose (suitable for both items) - suitable for: Diesel, heating oil, hydraulic oil, synthetic and mineral oils, alcohol, water, light distillates Technical Data: - Contents: 3 pieces - Colour: redFor commercial use, please observe the building regulations!
CHF 23.46
-
Gedore GEDORE jaw insertion tool 7118-19 spanner width 19 mm 14 x 18 mm ( 4000775181 )
Wed, 09/03/2025
Scope of Delivery: - Toll insertion tool 7118-19 spanner width 19 mm 14 x 18 mm Product Description: forged from CV steel - matt chrome-plated - for torque spanners Technical Data: - S: 25mm - Surface: matt chrome-plated - Material: CV steelFor commercial use, please observe the building regulations!
CHF 43.12
-
ASATEX ASATEX Regenschutzhose PU Stretch Größe M ( 4000378661 )
Wed, 09/03/2025
Lieferumfang:1x ASATEX Regenschutzhose PU Stretch Größe MProduktbeschreibung: EN 343 Kl. 3/1 · 100% Polyester (mit PU-Beschichtung) · winddicht · wasserdicht · sehr dehnbar · alle Nähte rückseitig abgeschweißt · extrem leicht · hohe Reißfestigkeit
CHF 22.22
-
SCHWAN Schwan Werkzeuge Painter's spatula ( 4000816482 ) width 50 mm hardened steel
Wed, 09/03/2025
Scope of Delivery: - 1x SCHWAN painting spatula width 50 mm Product Description: Steel blade - can be used for a wide range of painting jobs Technical Data: - Blade surface: polished, taper ground - Handle: wooden handle - Material: hardened steel - Width: 50 mm - Design: extra rigid blade - Blade thickness: 0.8 mm - Brand: SCHWANFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 36.09
-
Stanley STANLEY FATMAX automatic whipping line length 30 m ( 4000816668 )
Wed, 09/03/2025
Scope of Delivery: - FATMAX automatic whipping line length 30 m Product Description: equipped with polyester-nylon cord - high-quality aluminium housing - easy-grip stainless steel hook, can be stowed directly in the housing - viewing window for checking the amount of chalk - smooth extension without turning the crank - steel crank handle (can be locked in the housing) - integrated belt clip - Special product benefits: Up to 5 x faster winding due to 5:1 gear ratio Technical Data: - Accessories: Belt clip - Use: Fold-out crank handleFor commercial use, please observe the building regulations!
CHF 28.39
-
Ruko RUKO countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 8.3 mm ( 8000422471 )
Wed, 09/03/2025
Scope of Delivery: - Countersink ULTIMATECUT DIN 335 C 90 ° nominal Ø 8.3 mm Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Feed rate in steel up to 800 N: 0.15 mm/revFor commercial use, please observe the building regulations!
CHF 23.29
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"