All Tools

Show previous products

• 

  Wera WERA socket 8767 C HF TORX(R) 1/2 ″ ( 8000378049 )

  Fri, 11/28/2025

  Scope of Delivery: - Socket 8767 C HF TORX® 1/2 ″ Product Description: 12.5 mm (1/2″) square drive - with holding function and colour coding system - alloyed tool steel - matt chrome-plated for screws with internal TORX® profile Technical Data: - Material: alloyed tool steelFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 15.33

• 

  A.BINZEL A.BINZEL Electrode holder assembled model KURT HAUFE(R) 300 A ( 1000152645 )

  Fri, 11/28/2025

  Scope of Delivery: - Electrode holder assembled model KURT HAUFE® 300 A Product Description: consisting of electrode holder model KURT HAUFE® and rubber-coated copper cable H01N2-D - welding cable plug with corresponding cross-section - made in Germany - other cable lengths available on request Technical Data: - Mandrel Ø: 13mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 100.06

• 

  DEWALT DeWalt DCD 791 D1 cordless drill driver 18 V 70 Nm brushless + 1x battery 2.0 Ah + charger

  Fri, 11/28/2025

  Scope of Delivery: - 1x DeWalt DCD 791 cordless drill driver - 1x DeWalt DCB 183 18 V 2.0 Ah battery - 1x DeWalt DCB 1102 battery charger - 1x belt hook - 1x magnetic bit holder Product Description: Thanks to its very compact design and powerful motor with optimally tuned 2-speed full metal gearbox, the cordless drill driver is ideal for most applications. The safety electronics used by DeWalt (discharge protection, permanent battery temperature monitoring) enable long-term use of the cordless drill/driver without any problems. Its ergonomic design with a fully rubberised handle also ensures maximum safety and working comfort. The DeWalt DCD 791 is also equipped with an LED light, which makes working with the workpiece much easier thanks to the best possible illumination. A brushless motor gives the DCD 791 an extremely long service life and up to 50% longer runtime. Technical Data: - Manufacturer: DeWALT - Manufacturer's designation: DCD791 - Battery technology: XR Li-ion - Voltage: 18 V - Max. torque (soft): 27 Nm - Max. torque (hard): 70 Nm - Power output: 160 watts - Idle speed (1st gear): 0-550 rpm - No-load speed (2nd gear): 0-2000 rpm - Chuck capacity: 1.5 -13 mm - Max. drilling capacity (metal): 13 mm - Max. drilling capacity (wood): 40 mm - Sound pressure: 76 dB(A) - Sound power: 87 dB(A) - Sound power uncertainty (K): 3 dB(A) - Hand/arm vibration: ² - Vibration uncertainty: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 142.98

• 

  Makita 4x Makita soft sanding disc for random orbital sander / grinder 150 mm M8 ( 196684-1 )

  Fri, 11/28/2025

  Scope of Delivery: - 4x Makita soft sanding disc for random orbital sander / grinder 150mm M8 ( 196684-1 ) Product Description: The Makita soft sanding disc is a high-quality sanding disc for a wide range of random orbital sanders / grinders. These include the BO 5010, 5012, 5020, 5021, 5041, 5030, 5031, 5041 and BBO180 tools. Makita is a leading manufacturer of power tools, characterised by a long tradition and high quality workmanship. Technical Data: - Manufacturer: Makita - Manufacturer name: Sanding disc soft 150 mm - Manufacturer number: 196684-1 - Diameter: 150 mm - Weight: 100 g - Attachment: Velcro - Connection thread: M8 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 93.11

• 

  Wera WERA Electronic precision mechanics screwdriver 2050 PH 1 Blade length 60 mm ( 8000377489 )

  Fri, 11/28/2025

  Scope of Delivery: - Electronic precision mechanics screwdriver 2050 PH 1 Blade length 60 mm Product Description: with multi-component power mould micro handle with roll-off protection - three-zone concept with precision, power and fast rotation zone and rotating cap - round blade made of alloy tool steel with black point tip Technical Data: - Material: alloyed tool steelFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 11.08

• 

  Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000605525 ) nominal Ø 3.3 mm 65 mm 5xD right-hand cutting

  Fri, 11/28/2025

  Scope of Delivery: - 1x RUKO twist drill, nominal Ø 3.3 mm Product Description: HSS-Co5 - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, high-alloy steels (e.g. V2A/V4A), tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Nominal Ø tolerance: h8 - Overall length: 65mm - Coating: Gold - Nominal Ø: 3.3 mm - Total length: 65 mm - Spiral length: 36 mm - Shank design: straight shank - Point angle: 118 ° - Receptacle Ø: 3.3 mm - Type: N - Standard: DIN 338 - Cutting material: HSS-Co5 - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 37.94

• 

  Makita Makita GN 900 SE cordless gas nailer 7.2 V in transport case with 2x BL 7010 1.0 Ah battery and DC07SA charger

  Fri, 11/28/2025

  Scope of Delivery: - Makita GN 900 SE cordless gas nailer 7.2 V - Transport case (824990-1) - DC070SA charger (194320-3) - 2x Makita BL7010 1.0 Ah battery (194355-4) - Hexagon spanner 4 mm (783202-0) - Safety goggles (195246-2) Product Description: The handy and powerful GN 900 SE gas nailer from Makita makes working without a hose or compressor extremely convenient. A battery compartment with rubber insert protects the contacts from external influences and vibrations. The LED display warns of low battery voltage and malfunctions. One gas cartridge (not included) is sufficient for around 1,200 nails. The GN 900 has an adjustable depth impact and an empty impact safety device. Technical Data: - Pin length: 50 - 90 mm - Nail diameter: 2.9 - 3.3 mm - Magazine capacity: 44 nails - Nail angle: 34° - Battery voltage: 7.2 V - Battery capacity: 1.0 Ah - Dimensions: 321x108x368 mm - Weight: 3.2 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 434.93

• 

  DEWALT DeWalt DCD 791 D1 cordless drill driver 18 V 70 Nm brushless + 1x rechargeable battery 2.0 Ah + charger + TSTAK

  Fri, 11/28/2025

  Scope of Delivery: - 1x DeWalt DCD 791 cordless drill driver - 1x DeWalt DCB 183 18 V 2.0 Ah rechargeable battery - 1x DeWalt DCB charger - 1x DeWalt TSTAK case Product Description: The DeWalt DCD 791 cordless drill driver is ideal for most applications thanks to its very compact design and powerful motor with optimised 2-speed full metal gearbox. The safety electronics used by DeWalt (discharge protection, permanent monitoring of the battery temperature) enable problem-free long-term use of the cordless drill driver. The DeWalt DCD 791 is also equipped with an LED light, which makes working with the workpiece considerably easier thanks to the best possible illumination. A carbon brush-free motor (brushless) gives the DCD 791 an extremely long service life and up to 50% longer runtime. Technical Data: - Voltage: 18 V - Max. Torque 2nd gear (soft): 27 Nm - Max. Torque 1st gear (hard): 70 Nm - Idle speed 1st gear: 0-550 rpm - Idle speed 2nd gear: 0-2000 rpm - Drill chuck clamping width: 1.5 -13 mm - Max. Drilling capacity (wood): 40 mm - Max. Drilling capacity (metal): 13 mm - Max. Drilling capacity (masonry): 13 mm - Sound pressure: 76 dB(A) - Sound power: 87 dB(A) - Uncertainty factor (K): 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 145.26

• 

  Makita 2x Makita soft sanding disc for random orbital sander / sanding machine 150 mm M8 ( 196684-1 )

  Fri, 11/28/2025

  Scope of Delivery: - 2x Makita soft sanding disc for random orbital sander / grinder 150 mm M8 ( 196684-1 ) Product Description: The Makita soft sanding disc is a high-quality sanding disc for a wide range of random orbital sanders / grinders. These include the BO 5010, 5012, 5020, 5021, 5041, 5030, 5031, 5041 and BBO180 machines. Makita is a leading manufacturer of power tools, characterised by a long tradition and high quality workmanship. Technical Data: - Manufacturer: Makita - Manufacturer's name: Sanding disc soft 150 mm - Manufacturer number: 196684-1 - Diameter: 150 mm - Weight: 100 g - Attachment: Velcro - Connection thread: M8 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 51.22

• 

  DEWALT DeWalt DCD 791 D2 cordless drill driver 18 V 70 Nm brushless + 2x rechargeable battery 2.0 Ah + charger + TSTAK

  Fri, 11/28/2025

  Scope of Delivery: - 1x DeWalt DCD 791 cordless drill driver - 2x DeWalt DCB 183 18 V 2.0 Ah rechargeable batteries - 1x DeWalt DCB charger - 1x DeWalt TSTAK case Product Description: The DeWalt DCD 791 cordless drill driver is ideal for most applications thanks to its very compact design and powerful motor with optimised 2-speed full metal gearbox. The safety electronics used by DeWalt (discharge protection, permanent monitoring of the battery temperature) enable problem-free long-term use of the cordless drill driver. The DeWalt DCD 791 is also equipped with an LED light, which makes working with the workpiece considerably easier thanks to the best possible illumination. A carbon brush-free motor (brushless) gives the DCD 791 an extremely long service life and up to 50% longer runtime. Technical Data: - Voltage: 18 V - Max. Torque 2nd gear (soft): 27 Nm - Max. Torque 1st gear (hard): 70 Nm - Idle speed 1st gear: 0-550 rpm - Idle speed 2nd gear: 0-2000 rpm - Drill chuck clamping width: 1.5 -13 mm - Max. Drilling capacity (wood): 40 mm - Max. Drilling capacity (metal): 13 mm - Max. Drilling capacity (masonry): 13 mm - Sound pressure: 76 dB(A) - Sound power: 87 dB(A) - Uncertainty factor (K): 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 157.62

• 

  Makita Makita JS1601 tin snips with 380 watts solo

  Fri, 11/28/2025

  Scope of Delivery: - 1 x JS1601 Sheet metal shears with 380 watts solo Product Description: With the JS1601 sheet metal shears from Makita, you get a highly powerful tool for clean cuts on your desired workpieces. The robust design of the JS1601 is particularly noteworthy, and it is also very handy and compact to ensure excellent handling. It should be mentioned that the cutting chip rolls sideways and spirally during the cutting process, so that you can work cleanly and without disturbing chip development. Technical Data: - Power consumption : 380 watts - Idle stroke rate : 4,500 min-1 - Smallest cutting radius: 250 mm - Cutting capacity 200 N/mm²: 2.5 mm - Cutting capacity 400 N/mm²: 1.6 mm - Cutting capacity 600 N/mm²: 1.2 mm - Cutting capacity 800 N/mm²: 0.8 mm - Dimensions (LxWxH) mm: 320x56x78 - Weight: 1.4 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 272.56

• 

  DEWALT DeWalt DCD 791 NT cordless drill driver 18 V 70 Nm brushless + 1x rechargeable battery 2.0 Ah + TSTAK - without charger

  Fri, 11/28/2025

  Scope of Delivery: - 1x DeWalt DCD 791 cordless drill driver - 1x DeWalt DCB 183 18 V 2.0 Ah rechargeable battery - 1x DeWalt TSTAK case - without charger Product Description: The cordless drill driver is ideal for most applications thanks to its very compact design and powerful motor with optimised 2-speed full metal gearbox. The brushless motor works without carbon brushes and is therefore completely wear-free. This significantly increases efficiency and the battery needs to be charged less often. The safety electronics used by DeWalt (discharge protection, permanent monitoring of the battery temperature) enable problem-free long-term use of the cordless drill driver. The DeWalt DCD 791 is also equipped with an LED light, which makes working with the workpiece considerably easier thanks to the best possible illumination. The battery with Li-Ion technology, which maximises the service life and running time of the batteries, can be used for all 18 V XR Li-Ion devices from DeWalt. For an optimum overview of the battery charge, the batteries are also equipped with an LED capacity indicator. The set comes in a practical DeWalt case. With the 3 mm thick box walls and the bi-metal comfort handle, the box is robust yet easy to transport. Technical Data: - Voltage: 18 V - Max. Torque 2nd gear (soft): 27 Nm - Max. Torque 1st gear (hard): 70 Nm - Idle speed 1st gear: 0-550 rpm - Idle speed 2nd gear: 0-2000 rpm - Drill chuck clamping width: 1.5 -13 mm - Max. Drilling capacity (wood): 40 mm - Max. Drilling capacity (metal): 13 mm - Max. Drilling capacity (masonry): 13 mm - Sound pressure: 76 dB(A) - Sound power: 87 dB(A) - Uncertainty factor (K): 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 130.39

Show more products