All Tools
-
PFERD PFERD mounted point STEEL EDGE D8xH16mm 3 mm ( 4143050041 )
Fri, 10/17/2025
Scope of Delivery: - Mounted point STEEL EDGE D8xH16mm 3 mm Product Description: Suitable for use on edges and for deburring work on steel and cast steel components, as well as for grinding chamfers and grinding contours Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 26.55
-
WEDO WEDO rolling stool ( 9000460106 ) Sheet steel, light grey Upper Ø 295 mm Lower Ø 435 mm
Fri, 10/17/2025
Scope of Delivery: - 1x WEDO rolling stool, sheet steel, light grey Product Description: Sheet steel - powder-coated - mobile, with 3 spring-mounted castors - tread surfaces with anti-slip coating - height loaded 430 mm, unloaded 440 mm - top Ø 295 mm, bottom Ø 435 mm - total load 150 kg Technical Data: - Total load: 150kg - subject to inspection: yes - Colour: light grey - Upper Ø: 295 mm - Lower Ø: 435 mm - Height with/without load: 430/440 mm - Material: sheet steel - Height: 440 mm - Brand: WEDOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 57.41
-
Bosch BOSCH hammer drill Expert SDS-7X Ø 10.0 mm working l.250 mm l.315 mm ( 4000909945 )
Fri, 10/17/2025
Scope of Delivery: - Hammer drill Expert SDS-7X Ø 10.0 mm working length 250 mm length 315 mm Product Description: durable drilling of reinforced concrete - with Carbide Technology - penetrates effectively through the reinforcement - suitable for all SDS plus rotary hammers Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 18.45
-
ANSMANN Ansmann battery cell ( 4000876127 ) 9 V 340 mAh
Fri, 10/17/2025
Scope of Delivery: - 1x ANSMANN battery cell 9 V 340 mAh - 1x 9 V E-Block Li-Ion battery 400 mAh, USB-C charging cable Product Description: High-quality lithium-ion battery with integrated USB- C charging port - Temperature range: can be used from -20°C to +60°C Replacement for disposable batteries Technical Data: - Version: 1 9 V E-Block Li-Ion - Battery voltage: 9 V - Battery capacity: 340 mAh - Brand: ANSMANNNote on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 27.69
-
SST SST hinge bolt clamp ( 4000351364 ) 68-73 mm W1 band width 24 mm
Fri, 10/17/2025
Scope of Delivery: - 1x SST hinge bolt clamp 68-73 mm W1 Product Description: Material (W1) galvanised - suitable for pipe fastening, vehicle construction, heating and ventilation systems, ship and aircraft construction, industrial plants Technical Data: - Screw: M8 - Clamping range: 68-73 mm - Band width: 24 mm - Design: W1 - Material: galvanised - Brand: SSTFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 59.84
-
Ruko RUKO twist drill ( 8000423952 ) nominal Ø 10 mm 5 x D spiral length 87 mm
Fri, 10/17/2025
Scope of Delivery: - 1x RUKO twist drill, nominal Ø 10 mm Product Description: HSS - TiN head coated - DIN 338 - type N - point angle 118° profile ground - cross ground from Ø 2 mm - with straight shank - right-hand cutting - for steel up to 1000 N/mm², brass and plastic Technical Data: - Feed rate in steel up to 800 N: 0.16 mm/rev - Nominal Ø tolerance: h8 - Drilling depth: 5 x D - Pointing: Cross ground according to DIN 1412 C - Total length (1): 133.0mm - Main application: Steel For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 42.24
-
NORRES NORRES suction hose CP HiTex 480 inner Ø 150-152 mm ( 4501400468 )
Fri, 10/17/2025
Scope of Delivery: - Suction hose CP HiTex 480 inner Ø 150-152 mm Product Description: Applications: flexible hose for hot and cold gases, high-temperature extraction: Furnaces, foundries, blast furnaces, smelters, ceramics industry, glass industry, steelworks, aluminium smelters, dark radiators, ceiling heaters: Hot air ducting Properties: Scuff protection due to external clamping profile, tension-resistant clamping of the wall in the clamping profile, highly flexible + compressible 3:1, very good heat resistance, flame-retardant according to: DIN 4102-B1, RoHS compliant, very good against flying sparks and welding spatter Construction: 1. clamping profile support spiral: galvanised steel, 2. wall: specially coated glass fabric reinforced with stainless steel wires Temperature range: -60 °C to 400 °C, briefly up to 450 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 38.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 336.07
-
NORRES NORRES suction and blower hose CP Kapton(R) 476 114-115 mm 127.00 mm ( 4501403812 )
Fri, 10/17/2025
Scope of Delivery: - 1x NORRES suction and blower hose CP Kapton® 476 114-115 mm 127.00 mm Product Description: High-temperature hose, clamping profile hose, (up to +400°C) Applications: - Flexible hose for hot and cold gases - Exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reel, suction slot duct, above-floor extraction system, under-floor extraction system - Engine test bench, exhaust gas measurement - Chemical industry: chemical vapours, gas pendulum hose on loading arm, paint vapours, paint mist extraction - Paper mill, paper industry: dirty water, exhaust air - High-temperature extraction: Furnace, foundry, blast furnace, smelter, ceramics industry, glass industry, steelworks, aluminium smelter - bellows, expansion joint Properties: abrasion protection due to external clamping profile - tension-resistant clamping of the wall in the clamping profile - highly flexible + compressible 4:1 - very good heat resistance - good alkali and acid resistance - extremely good chemical resistance - RoHS compliant Temperature range: -60°C to 400°C Technical Data: - Bending radius: 32.00mm - Weight: 1.09kg/m - Physical state: GaseousFor commercial use, please observe the building regulations!
CHF 538.54
-
IRION IRION manual caulking gun HPS type 400 closed ( 4000356208 )
Fri, 10/17/2025
Scope of Delivery: - Manual caulking gun HPS type 400 closed Product Description: Sturdy sealant press - closed design - with sturdy aluminium screw connection and rotatable aluminium tube - transmission ratio 14:1 Technical Data: - Type: 400 - Gear ratio: 14:1 - Design: closedFor commercial use, please observe the building regulations!
CHF 25.40
-
DEISS Deiss tarpaulin ( 9000467231 ) W4000xL12500mm
Fri, 10/17/2025
Scope of Delivery: - 1x DEISS tarpaulin B4000xL12500mm Product Description: versatile for indoor and outdoor use - e.g. as masking film for painting work Technical Data: - Thickness: 7 µm - Width: 4000 mm - Length: 12500 mm - Material: HD-PE - Area: 50 square metres - Brand: DEISSPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 25.58
-
Sonstige Magnetic measuring stand ( 4000851657 ) Operating radius 285 mm Total height 430 mm
Fri, 10/17/2025
Scope of Delivery: - 1x magnetic measuring stand Operating radius 285 mm Total height 430 mm Product Description: with articulated arm - with mechanical central clamping and fine adjustment - great manoeuvrability with high clamping force by means of a clamping handle - switchable magnetic base with prismatic sole - gauge holder 8 mm H7 Technical Data: - Magnetic base height: 65mm - Magnetic base depth: 46mm - Magnetic base width: 70mm - Dial gauge mounting: 8mm - Operating radius: 285 mm - Total height: 430 mm - Holding force: 600 NFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 125.15
-
NORRES NORRES AIRDUC(R) PUR 350 FOOD-AS suction and delivery hose inner Ø 50-51 mm ( 4501401123 )
Fri, 10/17/2025
Scope of Delivery: - AIRDUC® PUR 350 FOOD-AS suction and delivery hose Inner Ø 50-51 mm Product Description: Applications: flexible hose for abrasive powder, bulk material, granulate, gases, conveying of dry and frozen food and pharmaceuticals, mixer, dryer, packaging machine, big bag filling/emptying, mill, potentially explosive area, clean room ventilation, semiconductor manufacturing machine, paper industry: waste water, exhaust air, medical technology, healthcare: Cable protection, air and suction hose, municipal vehicle: lawn mower, embankment mower, leaf vacuum/leaf collector Properties: medium-weight design, highly abrasion-resistant, food-safe wall acc: FDA FCN 21 CFR 177.1680 and 177.2600, odourless and tasteless, resistant to microbes and hydrolysis, good resistance to oil, petrol and chemicals, very good low-temperature flexibility, wall permanently antistatic: volume resistance and surface resistance Construction: 1. Wall: permanently antistatic premium ether polyurethane (Pre-PUR ® ), 3. wall thickness approx. 0.7 mm Temperature range: -40 to 90 °C, briefly up to 125 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 38.00mm - Physical state: Solid / gaseous - OverpressureDIN 26057(50% elongation)(bar): 1,250 (2,78) - Negative pressureDIN 26057(Axially fixed)(bar): 0.380 (1.00)For commercial use, please observe the building regulations!
CHF 161.21
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"