Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

All Tools

25001 products

  • NORRES exhaust hose CP HYP 450 PROTECT inner Ø 150-152 mm ( 4501402760 )

    NORRES NORRES exhaust hose CP HYP 450 PROTECT inner Ø 150-152 mm ( 4501402760 )

    Fri, 10/17/2025

    Scope of Delivery: - Exhaust hose CP HYP 450 PROTECT Inner Ø 150-152 mm Product Description: Applications: flexible hose for hot gases, exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reel, suction slot duct, above-floor extraction system, under-floor extraction system, engine test bench, exhaust gas measurement Features: outer protective profile made of elastic material, abrasion protection due to outer clamping profile, tension-proof clamping of the wall in the clamping profile, highly flexible + compressible, vibration-resistant, very good heat resistance, good chemical resistance, incl. 1 clamp cover strip and 2 end caps, RoHS compliant - REACH according to --> Technology / Technical Information / REACH Construction: 1. clamping profile support spiral: galvanised steel, 2. wall: CSM-coated polyester fabric, 3. firmly clamped impact and abrasion protection profile made of elastic high-temperature plastic Temperature range: flue gas temperatures up to 200°C * (only with correct use of flue gas funnels and sufficient fresh air supply (approx. 50%)). Delivery variants: other designs, dimensions and lengths available on request Technical Data: - Bending radius: 81.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 884.59

  • Novus hammer tacker J-033 ( 4000814032 ) type 11 / 140 (G) / 6 - 10

    NOVUS Novus hammer tacker J-033 ( 4000814032 ) type 11 / 140 (G) / 6 - 10

    Fri, 10/17/2025

    Scope of Delivery: - 1x NOVUS hammer tacker type 11 / 140 (G) / 6 - 10 Product Description: Large hammer tacker for staples up to 10 mm long - with ergonomic handle Technical Data: - Clamp length/type up to: Type 11 / 140 (G) / 6 - 10 - Material: Solid metal - Brand: NOVUSFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 51.61

  • DYMO writing tape tape width 12 mm tape length 7 m ( 4000871907 )

    DYMO DYMO writing tape tape width 12 mm tape length 7 m ( 4000871907 )

    Fri, 10/17/2025

    Scope of Delivery: - 1x DYMO writing tape tape width 12 mm tape length 7 m Product Description: self-adhesive on almost all smooth and clean surfaces (paper, plastic, metal, wood and glass) - the slit back allows easy removal - removable - resistant to water, oils and grease - temperature-resistant from -18 °C to +90 °C - tape length 7 m Technical Data: - Type: D1For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 98.91

  • VORMANN Scharnier  Höhe 80 mm Breite 120 mm ( 3000272165 )

    VORMANN VORMANN Scharnier Höhe 80 mm Breite 120 mm ( 3000272165 )

    Fri, 10/17/2025

    Lieferumfang:1x VORMANN Scharnier Höhe 80 mm Breite 120 mmProduktbeschreibung: Stahl · blau verzinkt · mit vernietetem Messingstift · nach DIN 7954 D

    1 - 2 business days

    CHF 52.32

  • Novus fine wire staple A type 53 ( 4000815153 ) Staple width 11.3 mm

    NOVUS Novus fine wire staple A type 53 ( 4000815153 ) Staple width 11.3 mm

    Fri, 10/17/2025

    Scope of Delivery: - 1x NOVUS fine wire staple Staple width 11.3 mm Product Description: Suitable for NOVUS devices: (type + clamp lengths in mm) J-11 (4-8), J-13 (4-10), J-17 (6-14), J-25 (4-10), J-27 (6-14), J-29 (6-14), J-105 (6-14), J-155 (8-18), J-165 (8-20), J-316 (6-16) Technical Data: - Wire width: 0.75 mm - Staple width: 11.3 mm - Leg length: 8 mm - Content: 1800 pcs. - Brand: NOVUSFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 11.70

  • HELIOS PREISSER pocket caliper DIN 862 SOFT-SLIDE 150 mm ( 4130031381 )

    HELIOS PREISSER HELIOS PREISSER pocket caliper DIN 862 SOFT-SLIDE 150 mm ( 4130031381 )

    Fri, 10/17/2025

    Scope of Delivery: - Pocket caliper DIN 862 SOFT-SLIDE 150 mm Product Description: particularly smooth-running, thanks to double-lapped guide rail - with locking screw - main graduation lowered - scale and vernier matt chrome-plated - for inside, outside, depth and step measurement Calibration on request and at extra charge. Technical Data: - subject to inspection: yesFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 43.68

  • Ridgid plastic pipe cutter PC-1250 ( 4000785000 ) 3 - 42 mm

    RIDGID Ridgid plastic pipe cutter PC-1250 ( 4000785000 ) 3 - 42 mm

    Fri, 10/17/2025

    Scope of Delivery: - 1x RIDGID plastic pipe cutter 3 - 42 mm Product Description: for cutting PE, PP, PB, PEX, MLP/ MSR, XLPE, CPVC, PVC and PVDF - easy, fast and precise cutting with minimum application force thanks to improved power transmission - rotating quick-change blade for double the service life Technical Data: - for material: PP/PE/PB/CPVC/PVC, composite pipe - Cutting range: 3 - 42 mm - Brand: RIDGID - for pipes: 1/8 - 1 5/8 ″ - for pipes mm: 3.18 - 41.28 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 36.15

  • Schnegel security angle striking plate ( 3000259584 ) Length 300 mm Width 25 mm Thickness 3 mm 006/910

    SCHNEGEL Schnegel security angle striking plate ( 3000259584 ) Length 300 mm Width 25 mm Thickness 3 mm 006/910

    Fri, 10/17/2025

    Scope of Delivery: - 1x SCHNEGEL security angle striking plate Length 300 mm Width 25 mm Thickness 3 mm Product Description: with 2 heavy-duty dowel anchors - Ø 10 mm - incl. screws, heavy-duty dowels and cover caps Technical Data: - Mounting type: for screwing on - Model: 006/910 - Material: steel - Surface: galvanised - Width: 25 mm - Length: 300 mm - Supplement: with 2 heavy duty dowels - Strike plate design: Angled strike plate - Thickness: 3 mm - Stop direction: DIN left / right - Depth: 25 mm - Brand: SCHNEGELFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 23.66

  • GAH Alberts hasp ( 8002657142 ) length 120 mm width 31.5 mm

    GAH GAH Alberts hasp ( 8002657142 ) length 120 mm width 31.5 mm

    Fri, 10/17/2025

    Scope of Delivery: - 1x GAH hasp length 120 mm width 31.5 mm Product Description: with loop made of rolled wire suitable for padlocks, max. size see table Material: steel, surface: galvanised yellow Technical Data: - Dimension c: 35mm - Dimension d: 43mm - Dimension a: 120mm - Dimension b: 31,5mm - Number of holes: 3 / 2 - Length: 120 mm - Width: 31.5 mm - Hole Ø: 4.4 / 3.6 mm - Surface: galvanised, thick-film passivated - Material: Steel - Brand: GAHFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 19.18

  • KLINGSPOR abrasive cloth roll KL 361JF 25 mm grit size 120 ( 8000352580 )

    KLINGSPOR KLINGSPOR abrasive cloth roll KL 361JF 25 mm grit size 120 ( 8000352580 )

    Fri, 10/17/2025

    Scope of Delivery: - 1x KLINGSPOR abrasive cloth roll KL 361JF 25 mm grit size 120 Product Description: Aluminium oxide - for metalworking - synthetic resin-bonded abrasive cloth with dense aluminium oxide coating - highly flexible - for the highest sanding requirements - very good grain adhesion - high sanding performance - 50 m roll Technical Data: - Packaging type: economy roll with sleeve and insertFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 31.73

  • NORRES AIRDUC(R) PUR-INOX 355 FOOD-AS suction and delivery hose Inner Ø 25 mm Outer Ø 32.00 mm ( 4502401020 )

    NORRES NORRES AIRDUC(R) PUR-INOX 355 FOOD-AS suction and delivery hose Inner Ø 25 mm Outer Ø 32.00 mm ( 4502401020 )

    Fri, 10/17/2025

    Scope of Delivery: - AIRDUC® PUR-INOX 355 FOOD-AS suction and delivery hose Inner Ø 25 mm Outer Ø 32.00 mm Product Description: Applications: flexible hose for high throughput of abrasive powder, bulk material, granulate and for gases, conveying of dry and frozen foodstuffs and pharmaceuticals, vacuum and suction conveyors, dosing systems, tablet presses, mixers, dryers, packaging machines, big bag filling/emptying, mills, industrial and hoovers, potentially explosive atmospheres, animal housing: Feed conveying, plant and transport Properties: heavy-duty design, highly abrasion-resistant, increased pressure and vacuum resistance, approval in accordance with EU Regulation 10/2011 and EC 1935/2004 and the latest EU Regulation 2015/174 by an independent testing institute for the entire hose, polyurethane food-safe in accordance with: FDA 21 CFR 177.2600, odourless and tasteless, resistant to microbes and hydrolysis, good resistance to oil, petrol and chemicals, very good low-temperature flexibility, wall permanently antistatic: volume resistance and surface resistance Construction: 1. Spring steel wire firmly moulded into the wall, spiral: stainless steel wire (INOX), 2. wall: permanently antistatic premium ether polyurethane (Pre-PUR ® ), 3. wall thickness 1.4 - 1.5 mm Temperature range: -40 °C to +90 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Physical state: Solid / Gaseous - Operating pressure: 3.565barFor commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 353.16

  • Klingspor abrasive paper PL 31 ( 4000845625 ) L280xW230mm grit 60

    KLINGSPOR Klingspor abrasive paper PL 31 ( 4000845625 ) L280xW230mm grit 60

    Fri, 10/17/2025

    Scope of Delivery: - 1x KLINGSPOR sandpaper L280xW230mm grit 60 Product Description: Aluminium oxide - finishing paper - glue-bonded abrasive paper - semi-open coating - good sanding performance - versatile use on wood, metal, paint, varnish - sheets - dimensions 280 x 230 mm Technical Data: - Length: 280 mm - Width: 230 mm - Grit size: 60 - Material suitability aluminium: limited suitability - Application: for wood/metal/lacquer - Material suitability steel: limited suitability - Brand: KLINGSPOR - Material suitability for paint: very suitable - Material suitability wood: very suitable - Material suitability plastic: conditionally suitableFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

    1 - 2 business days

    CHF 29.85


I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"

Log in

Forgot your password?

Don't have an account yet?
Create account