All Tools
-
Sola SOLA inclined spirit level NAM 50 T 50 cm ( 4000857466 )
Wed, 11/05/2025
Scope of Delivery: - Inclinometer spirit level NAM 50 T 50 cm Product Description: with holding magnets - for easy measurement of slopes - for fitters and metalworkers - the desired inclination can be variably adjusted by loosening the locking screw - strong pole shoe magnets for use in the metal sector - break-proof acrylic glass block vial (patented focus vial) Technical Data: - Colour: goldFor commercial use, please observe the building regulations!
CHF 159.03
-
AMF AMF extension nut no. 6334 M12 width across flats 19 mm ( 4000833425 )
Wed, 11/05/2025
Scope of Delivery: - Extension nut no. 6334 M12 width across flats 19 mm Product Description: hardened and tempered - strength class 10 - Application: The extension nut serves as any connecting element between DIN 787 (screw for T-slot) and DIN 6379 (stud bolt) and cannot be screwed through. For functional and safety reasons, both screws should be screwed in at half the height of the nut. Minimum screw-in length = 1x diameter For this article, the spanner width is according to the old DIN standard Technical Data: - Width across flats: 19mmFor commercial use, please observe the building regulations!
CHF 9.34
-
AMF AMF T-slot nut no. 510 T-slot 22 mm M16 ( 4000603185 )
Wed, 11/05/2025
Scope of Delivery: - T-slot nut no. 510 T-slot 22 mm M16 Product Description: rhombic - hardened and tempered - due to the reduced contact surface in the T-slot, the load capacity is lower than with the comparable DIN 508 sizes - Special product advantages: Rhombus T-nuts can be inserted into the T-slot from above. Particularly useful for long T-slots or if the machine table layout does not allow clamping screws or T-nuts to be inserted from the side Technical Data: - A: 21.7mm - D: M16 - K: 14mm - E: 35mm - H: 28mmFor commercial use, please observe the building regulations!
CHF 23.61
-
Gedore GEDORE locksmith's hammer Rotband-Plus 2000 g Handle length 400 mm ( 4000776460 )
Wed, 11/05/2025
Scope of Delivery: - Rotary hammer Rotband-Plus 2000 g Handle length 400 mm Product Description: DIN 1041 - carefully hardened and tempered - black lacquered - smoothly polished face and tiller - edge breakage in accordance with regulations - additional hardened steel handle protection sleeve - safety plate - ring wedge and wood screw ensure a secure connection between handle and hammer head - hickory handle Technical Data: - Weight: 2491g - Version: with steel sleeve - Standard: DIN 1041For commercial use, please observe the building regulations!
CHF 53.93
-
MOLDEX MOLDEX earplugs Twisters(R) 644101 EN 352-2 SNR 34 dB ( 4000370375 )
Wed, 11/05/2025
Scope of Delivery: - Earplugs Twisters® 644101 EN 352-2 SNR 34 dB Product Description: with connecting cord, this can be attached to the desired length with a single movement - curved style - the individual comfort position in the ear canal can be adjusted by turning the handle slightly EN352-2 (SNR) = 34 dB (A) / H value = 34 dB (A)/ M value = 30 dB (A) / L value = 28 dB (A) Hearing protection is classified under category III (fatal or irreversible damage) according to the new PPE regulation. Before the first use, and once a year thereafter, the employer must inform the employees of the prevailing noise hazard and instruct them on suitable protective measures. Technical Data: - L-value: 28dB - Feature: with handle, reusable, with cord - M-value: 30dB - H-value: 34dBFor commercial use, please observe the building regulations!
CHF 61.10
-
KNIPEX KNIPEX Electrical installation pliers length 200 mm VDE ( 4000811005 )
Wed, 11/05/2025
Scope of Delivery: - Electrical installation pliers Length 200 mm VDE Product Description: VDE-insulated up to 1000 V - manufactured in accordance with DIN EN/IEC 60900, piece-tested - for electrical installation - for gripping flat and round material, bending, deburring, cable cutting, stripping and crimping wire end ferrules - slim design for good accessibility - special tool steel in special quality, forged, multi-stage oil-hardened pliers, chrome-plated Technical Data: - Cross-section: 50mm²For commercial use, please observe the building regulations!
CHF 54.57
-
KWS KWS door buffer 2001.31 Height 18 mm ( 3000258199 )
Wed, 11/05/2025
Scope of Delivery: - Door buffer 2001.31 Height 18 mm Product Description: flat - incl. fastening material - with black rubber buffer - aluminium - height 18 mm Use max. door weight approx. 50 kg - can be under-mounted with 5/10/15 mm underlays Installation: The door buffer is screwed to the floor at the greatest possible distance from the door hinge. The pin to be inserted prevents the door buffer from twisting. Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 22.80
-
PFERD PFERD flap disc POLIFAN Z PSF STEELOX Ø 125 mm grain size 80 conical ( 4000842599 )
Wed, 11/05/2025
Scope of Delivery: - Flap disc POLIFAN Z PSF STEELOX Ø 125 mm grain size 80 conical Product Description: zirconium aluminium oxide - for universal grinding tasks on stainless steel (INOX) and steel - with aggressive cutting performance and good service life - for surface grinding, weld seam processing, chamfering and deburring - very good grinding results are achieved even with low contact pressure - bore 22.23 mm Ø Technical Data: - Bore: 22,23mmFor commercial use, please observe the building regulations!
CHF 41.51
-
Wera WERA torque screwdriver 300 IP 20 5 Nm ( 4000827969 )
Wed, 11/05/2025
Scope of Delivery: - Torque screwdriver 300 IP 20 5 Nm Product Description: with Kraftform handle with hexagonal blade and chrome-plated Black Point tip - when the torque is reached, the torque screwdriver triggers mechanically and signals this clearly audibly and perceptibly - accuracy +/- 10 % - preset torque cannot be tampered with long slim blade with only 4 mm hexagon - preset torque protected against tampering by a sealing ring - unlike the tightening torque, the loosening torque is not limited - handle labelling with the drive symbol of the screw, the size and the preset torque Technical Data: - subject to inspection: yesFor commercial use, please observe the building regulations!
CHF 61.03
-
HAZET HAZET double open-end spanner 450N 17 x 19 mm length 220.9 mm ( 4000822522 )
Wed, 11/05/2025
Scope of Delivery: - Double open-end spanner 450N 17 x 19 mm Length 220.9 mm Product Description: CV steel - forged - chrome-plated - jaw position 15° - slim heads - DIN 3110 / ISO 10102 Technical Data: - Surface: chrome-plated - Material: CV steel - Jaw position: 15°For commercial use, please observe the building regulations!
CHF 15.80
-
HOPPE HOPPE square spindle FDW profile spindle square 8 x 100 mm ( 3311003026 )
Wed, 11/05/2025
Scope of Delivery: - Square spindle FDW profile spindle square 8 x 100 mm Product Description: Galvanised iron - Attention: this exchangeable pin can only be used for knob signs or interchangeable sets with knob. With fastening screw for mounting on the plate/knob M12 x 1.25 mm. Technical Data: - Surface: galvanised - Design: splitFor commercial use, please observe the building regulations!
CHF 10.57
-
TFA TFA infrared thermometer - 60 to + 1000 °C ( 9000495037 )
Wed, 11/05/2025
Scope of Delivery: - Infrared thermometer - 60 to + 1000 °C - Infrared thermometer, calibration certificate, case, batteries Product Description: Non-contact measurement of surface temperature - Not suitable for reflective surfaces - Highest accuracy due to special precision glass lens Technical Data: - Batteries: 2 x type AAA - Measuring ratio: 50:1 - Laser class: 2Note on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!
CHF 210.68
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"