All Tools
-
ABUS ABUS profile double cylinder C 73 N 30/30 mm ( 3000280104 )
Wed, 11/12/2025
Scope of Delivery: - Profile double cylinder C 73 N 30/30 mm Product Description: Emergency and hazard function on both sides - manufactured to DIN EN 1303 Class 3 and DIN 18252 Class P 2 - matt nickel-plated brass - mushroom head mating pins for effective resistance to picking and tampering - long service life thanks to high-quality materials - pin holes visibly sealed from below - with 3 keys each and face plate screw 5 x 80 mm - in individual box Technical Data: - Material: Brass - Standard: DIN 18252For commercial use, please observe the building regulations!
CHF 21.85
-
Wera WERA Hex key L-wrench set 950 PKL 9-piece plastic holder ( 4000825492 )
Wed, 11/12/2025
Scope of Delivery: - Hex key L-wrench set 950 PKL 9-piece plastic holder - Supplied in plastic holder Product Description: with ball heads - long - with Hex-Plus profile (prevents hexagon socket screws from turning round) - made of alloyed tool steel - chrome-plated - long shank with ball head enables screwing up to an angle of 20° - short shank chamfered - SW 1.5 with conventional hexagon profile The angle spanner clip, which can be opened with a slide switch, ensures permanent clamping of the angle spanners and offers quick and secure access Technical Data: - Fitting: SW 1.5 - 10mmFor commercial use, please observe the building regulations!
CHF 27.81
-
BIMOS BIMOS interchangeable upholstery fabric black ( 9000454287 )
Wed, 11/12/2025
Scope of Delivery: - Changeable upholstery fabric black Product Description: for Neon task swivel chairs - soft and breathable, hard-wearing fabric cover - for seat and backrest Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 137.34
-
WEICON WEICON Cyanoacrylate Adhesive VA 1401 30 g ( 4555661161 )
Wed, 11/12/2025
Scope of Delivery: - Cyanoacrylate adhesive VA 1401 30 g Product Description: universal cyanoacrylate adhesive for bonding metals, plastics and rubber, both to and with each other - medium viscosity, 100-150 mPa.s - fast curing - cures well on fabric, paper, cardboard, cardboard, foam rubber and large-pored elastomers - temperature-resistant from -50 °C to +120 °C (briefly up to +150 °C) - NSF S4 approval, reg. no.: 162959 Technical Data: - Gap bridging max.: 0.15mmFor commercial use, please observe the building regulations!
CHF 287.26
-
OSBORN OSBORN fitting brush length 160 mm Ø 13 mm ( 4000841007 )
Wed, 11/12/2025
Scope of Delivery: - Fitting brush Length 160 mm Ø 13 mm Product Description: crimped wire - with plastic handle - for cleaning the inside of copper or gunmetal pipes and solder fittings Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 12.27
-
HELIT HELIT Abfallbehälter H375xØ214mm ( 9000468503 )
Wed, 11/12/2025
Lieferumfang:1x HELIT Abfallbehälter H375xØ214mmProduktbeschreibung: mit Einwurfklappe · stoßfester Kunststoff · Kopfteil abnehmbar
CHF 18.03
-
PROBST PROBST rubber mallet accessories GH ERGO 2x bevelled ( 4000818780 )
Wed, 11/12/2025
Scope of Delivery: - Rubber mallet accessories GH ERGO 2x bevelled Product Description: GMT rubber rail 75/40 x 60 x 60 mm, made of NK-SBR 65 Shore 2 M8 weight - hole spacing 55 Technical Data: - Weight:For commercial use, please observe the building regulations!
CHF 52.50
-
GANTER GANTER indexing plunger GN 817 d1 10 mm d2 M 16 x 1.5 mm l1 12 mm ( 4601001396 )
Wed, 11/12/2025
Scope of Delivery: - Indexing plunger GN 817 d1 10 mm d2 M 16 x 1.5 mm l1 12 mm Product Description: Detent pins are used when the detent pin should not protrude temporarily. For this purpose, the knob is rotated by 90° after the pin has been retracted - the knob is held in this position by a locking notch - knob plastic thermoplastic (polyamide PA) - black, matt - cannot be removed other versions on request Technical Data: - d4: M 6mm - k: 24mm - l4: 8mm - l3: 26mm - l5: 8.5mm - l2: 58mm - l1: 12mm - d1: 10mm - d5: 10mm - d2: M 16 x 1.5mm - d3: 28mm - l6: 4mmFor commercial use, please observe the building regulations!
CHF 58.89
-
DENI DENI spring door closer / index spring for light doors ( 3000215026 )
Wed, 11/12/2025
Scope of Delivery: - Spring door closer / index spring for light doors Product Description: Galvanised Technical Data: - Lever length: 280mmFor commercial use, please observe the building regulations!
CHF 26.34
-
HAZET Hazet socket 900 ( 4000822688 ) 1/2 ″ hexagon length 38 mm
Wed, 11/12/2025
Scope of Delivery: - 1x HAZET socket 1/2 ″ hexagon Product Description: 12.5 mm (1/2″) square drive - hexagonal - CV steel - knurled - chrome-plated, polished Technical Data: - Material: CV steel - Width across flats: 18 mm - Length: 38 mm - Surface: chrome-plated, polished - Drive square mm: 12.5 mm - Version: hexagonal - Square drive: 1/2″ - Standard: DIN 3124 / ISO 2725-1 - Model: 900-18 - Brand: HAZETPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 16.35
-
KUKKO KUKKO puller 20-30 Clamping depth 200 mm ( 4000821851 )
Wed, 11/12/2025
Scope of Delivery: - Puller 20-30 Clamping depth 200 mm Product Description: two-armed - with sliding, always parallel puller hooks - special steel - with strong spindle for high pressure performance and crosshead with high bending strength - puller hooks with large contact surfaces for gentle pulling - optimum adaptation of the spindle to the shaft due to 2-sided spindle tip (ball and tip) by reversing the arms, the puller can also be used as an internal puller Application: universally applicable, for pulling ball bearings, bearings, gears, etc. - can also be used as an external and internal puller by reversing the arms. - can be used as an external and internal puller by reversing the puller hooks - also suitable for pulling asymmetrical workpieces Technical Data: - Weight: 7.53kg - Material: special steelFor commercial use, please observe the building regulations!
CHF 320.38
-
SCHWAN Schwan Werkzeuge Tyrolean trowel ( 4000816833 ) length 315 mm width 125 mm stainless steel
Wed, 11/12/2025
Scope of Delivery: - 1x SCHWAN Tyrolean trowel Length 315 mm Width 125 mm Product Description: Suitable for bricklaying, plastering and tiling work - perfect for working with materials such as mortar and plaster Technical Data: - Length: 315 mm - Handle: lacquered wood - Neck: S-shape - Blade: stainless steel - Width: 125 mm - Design: Wooden handle, S-neck - Material: Stainless steel - Brand: SCHWANFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 71.29
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"