All Tools
-
FHB FHB BRUNO work trousers size 54 ( 4000375004 )
Wed, 11/12/2025
Scope of Delivery: - 1x FHB work trousers BRUNO size 54 Product Description: 65% cotton / 35% polyester, approx. 300 g/m² - 2 front and back flap pockets - knee pad pockets - contrast bars to reinforce the pocket corners - 1 ruler pocket with pen pockets on the right - leg pocket and mobile phone pocket on the left - simple option to extend the trousers by 3 cm on request available sizes: 42-44, 60-74, 84-114 and 23-35 Technical Data: - Fabric weight approx.: 300g/m²For commercial use, please observe the building regulations!
CHF 73.12
-
PAFFRATH PAFFRATH Henkellocheisen Hole-Ø 27 mm ( 4000814427 )
Wed, 11/12/2025
Scope of Delivery: - Henkelloche iron Hole-Ø 27 mm Product Description: DIN 7200 A - for punching out cardboard, leather, rubber and other soft materials - strong drop-forged shape - cutting edge hardened and tempered to 48 - 56 HRC - tapered inside and polished - shaft machined and resistant powder-coated Technical Data: - Weight: 420g - Shank: red - Standard: DIN 7200 Form AFor commercial use, please observe the building regulations!
CHF 19.92
-
WINDHAGER Windhager bird and pigeon repellent ( 4000818602 ) 30 spikes
Wed, 11/12/2025
Scope of Delivery: - 1x WINDHAGER bird and pigeon repellent 30 spikes Product Description: Additional spike sets - suitable for Starter Set 4000 818 600 - for compacting the modules - reliable defence against pigeons and other birds - permanent use - 30 spikes, height: approx. 11 cm Technical Data: - Version: 30 spikes - Brand: WINDHAGERFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 29.77
-
Gedore GEDORE socket D 19 1/2 ″ 12-sided ( 4000821280 )
Wed, 11/12/2025
Scope of Delivery: - Socket D 19 1/2 ″ 12-square Product Description: 12.5 mm (1/2″) square drive - vanadium steel - chrome-plated - knurled - DIN 3124 / ISO 2725-1 Technical Data: - Material: Vanadium steelFor commercial use, please observe the building regulations!
CHF 12.89
-
PFERD PFERD cutting disc EHT PSF ALU+STONE ( 8000435659 ) D125x1mm straight bore 125 mm
Wed, 11/12/2025
Scope of Delivery: - 1x PFERD cutting disc D125x1mm straight Product Description: for non-ferrous metals and mineral materials with high cutting performance and good tool life - bore 22.23 mm Ø Technical Data: - Drive type: Angle grinder, cordless angle grinder - Machining tasks: Creating cut-outs, cutting profiles, cutting sheet metal, cutting solid material - Note: PFERDEFFICIENCY recommends thin cutting discs for perfect results in the shortest possible time. PFERDERGONOMICS recommends thin cutting discs in order to sustainably reduce the vibration, noise and dust generated during use and to improve working comfort. - Advantages: Comfortable and safe. Highly economical thanks to long service life. Fast separating cuts. Thin and low-burr cuts. Ideal for cordless angle grinders. Fast work progress thanks to high cutting performance. - Ø: 125 mm - Disc thickness: 1 mm - Max. speed: 12200 min-¹ - Width: 1 mm - Abrasive: Silicon carbide SiC/C - Material suitability stone: very suitable - Material suitability aluminium: very suitable - Disc Ø: 125 mm - Material suitability cast iron: very suitable - Bore: 125 mm - Shape: straight - Brand: PFERD - Bore Ø: 22.23 mm - Material classification: AluminiumFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 42.91
-
PAFFRATH PAFFRATH Henkellocheisen Hole-Ø 4 mm ( 4000814404 )
Wed, 11/12/2025
Scope of Delivery: - Henkelloche iron Hole-Ø 4 mm Product Description: DIN 7200 A - for punching out cardboard, leather, rubber and other soft materials - strong drop-forged shape - cutting edge hardened and tempered to 48 - 56 HRC - tapered inside and polished - shaft machined and resistant powder-coated Technical Data: - Weight: 40g - Shank: red - Standard: DIN 7200 Form AFor commercial use, please observe the building regulations!
CHF 10.16
-
RHODIUS RHODIUS cutting disc XT10 D125x1.5mm straight ( 4000841295 )
Wed, 11/12/2025
Scope of Delivery: - Cutting disc XT10 D125x1.5mm straight Product Description: Sharp from the first cut, the improved XT10 impresses with its outstanding cutting performance and delivers the best work results on stainless steel and steel - Material: stainless and acid-resistant steels - Hardox - hardened, high-alloy and high-strength steels - galvanised parts Application: thin-walled tubes and profiles - sheet metal - solid material - flat bars Special product benefits: low burr formation - low flying sparks - very high cutting speed - very long service life - cool cut - low odour development Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 76.87
-
KUKKO Kukko pressure spindle ( 4000767879 ) M 18x1.5x175 mm
Wed, 11/12/2025
Scope of Delivery: - 1x KUKKO pressure spindle M 18x1.5x175 mm Product Description: a maximum pulling force of 10 t can be achieved with the mechanical pressure spindle - manual actuation of the spindle ensures sensitive control of the pulling process - the fine thread also guarantees perfect force transmission - a reversible spindle tip enables the spindle to be positioned securely on smooth surfaces as well as when centring Technical Data: - Length of the spindle: 175 mm - Thread diameter: 18 mm - Width across flats: 19 mm - Thread: M 18x1.5 - Mounting diameter of the spindle tip: 10.4 mm - Two-sided spindle tip: 616180 - Measurement of the thread: 4.50 mm - Thread: M 18x1.5 - Length: 175 mm - suitable for: 12-2/18-1/32-2/-2-F/110-2 110-20 - Brand: KUKKO For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 56.02
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 3.1 mm ( 4000600443 )
Wed, 11/12/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 3.1 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.06 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
CHF 15.36
-
SPANSET SPANSET automatic lashing system DIN EN 12195-2 Length 3 m Width 25 mm ( 4000365475 )
Wed, 11/12/2025
Scope of Delivery: - Automatic lashing system DIN EN 12195-2 Length 3 m Width 25 mm Product Description: Polyester - with automatic retractor Technical Data: - subject to inspection: yesFor commercial use, please observe the building regulations!
CHF 19.81
-
RÖHM RÖHM EXTRA80-RV quick-action drill chuck clamping Ø 1.5-13 mm ( 4000832112 )
Wed, 11/12/2025
Scope of Delivery: - Quick-action drill chuck EXTRA80-RV Clamping Ø 1.5-13 mm - Supplied without locking screw Product Description: in metal housing - with radial locking - for cordless drills and screwdrivers - mains drill with automatic adjustment - impact drill-proof - with dust protection - drilled through - clamping chamfers of the jaws made of carbide - for clockwise and anti-clockwise rotation Technical Data: - Direction of rotation: for clockwise and anti-clockwise rotationFor commercial use, please observe the building regulations!
CHF 43.00
-
HDT HDT Multimeter HDT 60 2-600 V AC/DC ( 4000828832 )
Wed, 11/12/2025
Scope of Delivery: - Multimeter HDT 60 2-600 V AC/DC - Delivery incl. battery (1 x type block battery) and test leads, spare battery see art. no. 4000 901 814 Product Description: with 3½-digit LCD display - for measuring voltage, current and resistance Measuring ranges: Voltage AC/DC: 2 V...600 V / 1 mV Tolerance: ± (1.5 % +5 rdg) / ± (0.8 % + 3 rdg) Current AC/DC: 200 mA, 10 A / 0.1, 10 mA Tolerance: ± (1.5 % + 5 rdg) Resistance: 2 k...2 MOhm Power supply: Battery: 9 V IEC 6LR61 Standards: DIN VDE 0411, EN 61010, IEC 61010, CAT III / 600 V Technical Data: - Width: 72mm - Length: 145mm - Height: 40mm - subject to testing: yesNote on the disposal of batteries and rechargeable batteries - As we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!
CHF 49.43
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"