All Tools
-
FHB FHB knitted fleece jacket CHRISTOPH size L ( 4000379051 )
Fri, 11/14/2025
Scope of Delivery: - Knitted fleece jacket CHRISTOPH size L Product Description: 100% polyester, approx. 280 g/m² - extremely light and supple men's knitted fleece jacket - close-fitting, fashionable fit - elasticated, black side sections made of 100% polyester - 2 spacious, front zip side pockets and 1 generous arm pocket with zip - 2 open inside pockets - YKK front zip available on request sizes: XS, S and 3XL-5XL Technical Data: - Fabric weight approx.: 280g/m²For commercial use, please observe the building regulations!
CHF 65.81
-
Wera WERA screwdriver 355 PZ size PZD 2 blade length 200 mm ( 4300001660 )
Fri, 11/14/2025
Scope of Delivery: - Screwdriver 355 PZ Size PZD 2 Blade length 200 mm Product Description: with multi-component power moulded handle with roll-off protection - blade made of molybdenum vanadium steel - nicromatt with laser tip - size guide system - Take it easy Tool Finder System - for screws with cross recess (PZD) Technical Data: - Design: Round blade - Material: alloyed tool steelFor commercial use, please observe the building regulations!
CHF 19.28
-
Ruko RUKO Countersink set DIN 335 90 ° ULTIMATECUT 6.3-25.0 mm ( 8000422540 )
Fri, 11/14/2025
Scope of Delivery: - Countersink set DIN 335 90 ° ULTIMATECUT 6.3-25.0 mm - in impact-resistant and break-proof plastic case Product Description: The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. The new geometry also counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Technical Data: - Packaging: Plastic boxFor commercial use, please observe the building regulations!
CHF 131.83
-
PAFFRATH PAFFRATH Henkellocheisen Hole-Ø 45 mm ( 4000814445 )
Fri, 11/14/2025
Scope of Delivery: - Henkelloche iron Hole-Ø 45 mm Product Description: DIN 7200 A - for punching out cardboard, leather, rubber and other soft materials - strong drop-forged shape - cutting edge hardened and tempered to 48 - 56 HRC - tapered inside and polished - shaft machined and resistant powder-coated Technical Data: - Weight: 700g - Shank: red - Standard: DIN 7200 Form AFor commercial use, please observe the building regulations!
CHF 39.27
-
PFERD PFERD workshop file DIN 7261 length 250 mm cross-section 25 x 6 mm ( 4000840173 )
Fri, 11/14/2025
Scope of Delivery: - Workshop file DIN 7261 Length 250 mm Cross-section 25 x 6 mm Product Description: flat blunt - shape A - rectangular file with cut on three sides, one side uncut - for processing right-angled geometries and for general filing work in industry and trade - also suitable for bronze, copper, brass, zinc Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 12.87
-
Bosch BOSCH hammer drill Plus-5 Ø 16.0 mm working length 550 mm length 610 mm ( 4000909843 )
Fri, 11/14/2025
Scope of Delivery: - Hammer drill Plus-5 Ø 16.0 mm working length 550 mm length 610 mm Product Description: with SDS-plus holder - Serrated carbide for smooth work without seizing - Activteq centre point ensures active cutting in concrete and a precise hole diameter - AWB brazing and hardening technology reduces vibrations during drilling to reduce user strain - 2 cutting edges Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 28.46
-
Ruko RUKO twist drill DIN 345 type N nominal Ø 15 mm ( 4000601307 )
Fri, 11/14/2025
Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 15 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK2 - Quality: profile groundFor commercial use, please observe the building regulations!
CHF 22.88
-
OSBORN OSBORN brush Ø 10 mm wire thickness 0.3 mm ( 4145100110 )
Fri, 11/14/2025
Scope of Delivery: - Brush Ø 10 mm wire thickness 0.3 mm Product Description: crimped wire - galvanised sleeve - for removing burrs, rust, slag and other impurities from hard-to-reach areas and internal surfaces - shaft Ø 6 mm Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 10.32
-
VERIBOR VERIBOR pump suction lifter Load capacity 120 kg Head Ø 214 mm ( 4000817309 )
Fri, 11/14/2025
Scope of Delivery: - Pump suction lifter Load capacity 120 kg Head Ø 214 mm Product Description: made of plastic - with built-in hand pump - vacuum build-up by actuating the pump plunger - ventilation lever secured against unintentional actuation - locking ring for visual control of full load capacity - profiled rubber disc with 4 sealing lips - in plastic case - replaceable rubber discs - handle Ø 3 - 3.5 cm Technical Data: - nanFor commercial use, please observe the building regulations!
CHF 106.79
-
KUKKO KUKKO impact number set 330 9-piece numbers 0 - 9 ( 8000458608 )
Fri, 11/14/2025
Scope of Delivery: - Set of striking numbers 330 9-piece Numbers 0 - 9 - Strike numbers 0 - 9 Product Description: extra heavy quality 9 pieces - for marking workpieces with a strength of up to 1300 N/mm² (42 HRC) - hardness at the engraving: 58-61 HRc - with visible engraving on each stamp - machine-engraved - typeface in accordance with DIN 1451 - made of tool steel, nickel-plated surface - in plastic box - particularly suitable for marking stainless steels, as the nickel-plated surface does not leave any extraneous rust behind Technical Data: - Contents: 9 pieces - Design: Numbers 0 - 9 - Packaging: in plastic boxFor commercial use, please observe the building regulations!
CHF 17.77
-
Gedore GEDORE pipe socket spanner 26 R Width across flats 24 x 26 mm Length 180 mm ( 4000770894 )
Fri, 11/14/2025
Scope of Delivery: - Pipe socket spanner 26 R Width across flats 24 x 26 mm Length 180 mm Product Description: Steel tube (C35) - hardened - chrome-plated - hexagonal ends - with hollow shank - seamless - DIN 896 Form B / ISO 2236 / ISO 1085 / DIN 2391 Technical Data: - Surface: chrome-plated - Bore Ø: 14.5mm - Material: C35For commercial use, please observe the building regulations!
CHF 17.92
-
Wera WERA screwdriver 367 TORX size T 9 blade length 60 mm ( 4000827859 )
Fri, 11/14/2025
Scope of Delivery: - Screwdriver 367 TORX size T 9 Blade length 60 mm Product Description: with multi-component power moulded handle with roll-off protection - alloy tool steel blade with BlackPoint tip - size guide system - Take it easy Tool Finder System - for screws with internal TORX® profile Technical Data: - Design: Round blade - Material: alloyed tool steelFor commercial use, please observe the building regulations!
CHF 13.05
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"