Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

All Tools

Show previous products

BURG-WÄCHTER BURG-WÄCHTER door wedge TKL 2016 T 160 mm ( 3000253282 )

Sat, 11/15/2025

Scope of Delivery: - Door wedge TKL 2016 T 160 mm Product Description: Length 160 mm - made of transparent plastic Technical Data: - Material: PlasticFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 8.83
SAPISELCO SAPISELCO cable ties length 280 mm width 4.5 mm ( 4000900702 )

Sat, 11/15/2025

Scope of Delivery: - 1xSAPISELCO cable tie length 280 mm width 4.5 mm - Supplied in a polybag Product Description: made of polyamide 6.6 - internally serrated - for outdoor use - self-extinguishing (V2: UL 94) and highly acid-resistant - for bundling and fastening cables, wires and hoses - ideal for mounting photovoltaic systems - UV-stable Supplied in a polybag Technical Data: - Tensile load: 220NFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 13.33
SAPISELCO SAPISELCO cable ties SEL.FIT length 750 mm width 7.5 mm ( 4000900712 )

Sat, 11/15/2025

Scope of Delivery: - 1xSAPISELCO cable tie SEL.FIT length 750 mm width 7.5 mm - Supplied in a polybag Product Description: made of polyamide 6.6 - internally serrated - for bundling and fastening cables, wires and hoses - high flexibility even with strong temperature fluctuations - self-extinguishing in accordance with the UL94 V2 POLYAMID standard within max. 30 seconds - not UV-resistant Supplied in a polybag Technical Data: - Tensile load: 460NFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 42.99
ASATEX ASATEX chemical gloves size 10 yellow ( 4000371302 )

Sat, 11/15/2025

Scope of Delivery: - Chemical gloves size 10 yellow Product Description: according to EN 388 - EN 374 - Cat. III - Material: natural latex with cotton flocking - fully coated - oil and grease repellent - maximum dexterity - non-slip profile - Application: suitable for the food industry, against mechanical risks, chemicals and micro-organisms Technical Data: - Material suitability for crafts: limited suitability - Abrasion resistance: 1 - Tear resistance: 1 - Puncture resistance: 0 - Cut resistance (cutting test): 0 - Material suitability for food: very suitable - Design: suitable for foodstuffs - Thickness approx.: 0.45mm - Chemical resistance: A = methanol / K = sodium hydroxide 40 % / L = sulphuric acid 96 %For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 17.33
Wera WERA Bit 867/4 Z 1/4 ″ T 6 Length 50 mm ( 4000829338 )

Sat, 11/15/2025

Scope of Delivery: - Bit 867/4 Z 1/4 ″ T 6 Length 50 mm Product Description: tough and hard - for universal use - for manual and machine operation (conventional cordless screwdriver) Drive: 6.3 mm (1/4″) hexagon according to DIN ISO 1173 - E 6.3 Technical Data: - nanFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 37.83
IRION IRION cartridge press Profi XP Delta Metal ( 4000356201 )

Sat, 11/15/2025

Scope of Delivery: - Cartridge press Profi XP Delta Metal Product Description: Sturdy professional tool with rotating bowl and extra strong delta pusher block - selectable transmission ratio: 25:1 or 12:1 - overrun stop function can be activated - rubberised, non-slip handle and trigger - pusher and drive parts with corrosion-protected special alloy - integrated ladder hook - also suitable for viscous materials - for all standardised cartridges (310 ml) Technical Data: - Gear ratio: 25:1 or 12:1 - Colour: black - Design: swivelling bowl - suitable for: all standardised cartridges (310 ml)For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 50.79
NORRES NORRES suction and delivery hose AIRDUC(R) PUR 356 AS inner Ø 40 mm ( 4501400202 )

Sat, 11/15/2025

Scope of Delivery: - Suction and delivery hose AIRDUC® PUR 356 AS inner Ø 40 mm Product Description: Applications: Hose for high throughput of extremely abrasive bulk material, granulate, stone, plastics industry: granulate, vacuum and suction conveyor, dosing system, big bag filling/emptying, shredder, mill, extruder, injection moulding machine, suction and dry vehicle: roof graveling, industrial cleaning, power plant cleaning, suction excavator, potentially explosive atmospheres, agriculture: Pneumatic grain conveyor, concrete pump: discharge hose, construction industry: rock drilling machine, raw material conveyor hose for sand, quartz, gravel, cullet, chips, compressor/compressor, side channel blower, vacuum and pressure pump, paper industry/packaging machine: edge trim suction, surface treatment: shot and sand blasting media recirculation e. g. B. to blasting cabin, shipyard, stripper, floor milling machine, grinding machine, silo vehicle/tank lorry: silo filling and emptying, conveying wood pellets, plastic granulate and powder Properties: super heavy-duty design, extremely abrasion-resistant due to targeted reinforcement under the wire and small hose pitch, very high pressure, vacuum and crimp pressure resistance, microbe-resistant, good oil, petrol and chemical resistance, very good cold flexibility, wall permanently antistatic: contact resistance and surface resistance Construction: 1. Spring steel wire firmly moulded into the wall, 2. wall: permanently antistatic premium ester polyurethane (Pre-PUR ® ), 3. wall thickness approx. 2.0 - 2.5 mm, 4. reinforcement of the primary wear zones Temperature range: -40 °C to +90 °C (short +125 °C) Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 109.00mm - Physical state: SolidFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 508.03
MAS MAS Overhead fall arrester MAS SK 12-Hub EN353-2 ( 4000385124 )

Sat, 11/15/2025

Scope of Delivery: - Overhead fall arrester MAS SK 12-Hub EN353-2 Product Description: due to falls, catapult effect and technical failure, there is a recommendation to secure oneself in aerial work platforms (mobile work baskets) EN 352-2 - free-running fall arrester with sewn-on energy absorber - with special approval for work in aerial work platforms - which reduces the impact forces occurring during a fall - the device is only supplied complete with 1.4 m kernmantel rope - these products are tested and approved for vertical and horizontal use with an expected load from a fall over the edge. Technical Data: - Application: Special authorisation for work in aerial work platforms - Standard: EN353-2 - Service life max./years: 4-6 - subject to inspection: yesFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 78.33
Proxxon PROXXON rechargeable battery pack LI/A2 10.8 V ( 4681154014 )

Sat, 11/15/2025

Scope of Delivery: - Battery pack LI/A2 10.8 V Product Description: Li-ion - for MICROMOT battery-powered devices - integrated temperature monitoring Technical Data: - Information on the disposal of batteries and rechargeable batteries - As we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the German Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 44.04
Wiha WIHA interchangeable blade 26064 T 6 0.6 Nm dark green ( 4000790809 )

Sat, 11/15/2025

Scope of Delivery: - Interchangeable blade 26064 T 6 0.6 Nm dark green Product Description: Blade made of chrome-vanadium-molybdenum steel - matt chrome-plated - with colour coding - length: 175 mm suitable for torque handles, part no. 4000 827 971, 4000 827 972, 4000 827 973, 4000 827 974, 4000 880 026, 4000 880 027 Technical Data: - Material: chrome-vanadium-molybdenum steelFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 12.29
NORRES NORRES suction and blower hose TIMBERDUC(R) PUR 531 AS inner Ø 60 mm ( 8000479711 )

Sat, 11/15/2025

Scope of Delivery: - Suction and blower hose TIMBERDUC® PUR 531 AS Inner Ø 60 mm Product Description: Applications: Extraction, dust extraction and filter system, oil mist extraction, hazardous area, wood dust extraction, wood chips : furniture production, sawmill, CNC machine, CNC machining centre (especially for fast moving), bellows, expansion joint Properties: lightweight design, highly flexible + compressible 4:1, abrasion-resistant, microbe-resistant, good oil, petrol and chemical resistance, flame-retardant acc: DIN 4102-B1, wall permanently antistatic: contact resistance and surface resistance Construction: 1. spring steel wire embedded in the wall, 2. wall: permanently antistatic premium polyurethane (Pre-PUR ® ) resistant to aggressive woods and wood preservatives, 3. wall thickness approx. 0.4 mm Temperature range: -40 °C to 90 °C, briefly up to 125 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 38.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 157.43
Ruko RUKO twist drill DIN 338 type N nominal Ø 1.5 mm ( 4000600127 )

Sat, 11/15/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 1.5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.03mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 10.32