All Tools

Show previous products

• 

  KLINGSPOR Klingspor abrasive cloth roll KL 385 JF ( 4000844449 ) 50 mm grain size 60 aluminium oxide

  Sun, 11/30/2025

  Scope of Delivery: - 1x KLINGSPOR abrasive cloth roll 50 mm grit 60 Product Description: Aluminium oxide - with cloth backing for metal universal - it is designed for both hand sanding and use on hand-held machines - suitable for sanding profiles or moulded parts, surface sanding, coarse sanding and finishing - roll of 50 m Technical Data: - Roll width: 50 mm - Grain size: 60 - Length: 50 m - Material suitability INOX: limited suitability - Material suitability aluminium: very suitable - Area of application: for metal - Material suitability steel: very suitable - Brand: KLINGSPOR - Material: corundum - Material suitability wood: very suitable - Material suitability for plastic: limited suitabilityFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 46.10

• 

  HOPPE HOPPE fixing set Sertos(R) FS-K/G 60-70 mm without ( 3000209948 )

  Sun, 11/30/2025

  Scope of Delivery: - Mounting set Sertos® FS-K/G 60-70 mm without Product Description: Sertos® fixing set (FS, knob/handle) - FDW profile pin - for all fire-resistant interchangeable sets (knob/handle) of HOPPE short escutcheon and rose sets with Sertos® technology ATTENTION: except for sets with handle model FS-1138! Technical Data: - nanFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 10.75

• 

  FSB FSB panic pin 05 0125 Square 9 x 139 mm ( 3322002018 )

  Sun, 11/30/2025

  Scope of Delivery: - Panic pin 05 0125 Square 9 x 139 mm Product Description: FSB fire protection/panic special pin made of galvanised steel - square 9 x 104 mm - for locks with split follower in accordance with DIN 18273 with centred lock position - if the lock is not centred, please provide exact order details in accordance with FSB further information - Only tested hardware may be installed on fire protection and emergency exit doors. Therefore, always use the original square spindle from the hardware manufacturer! Technical Data: - Surface: galvanised - Design: asymmetricalFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 21.39

• 

  KLINGSPOR KLINGSPOR flap disc NCS 600 Ø50xH30mm grit 100 ( 4000844371 )

  Sun, 11/30/2025

  Scope of Delivery: - 1x KLINGSPOR flap disc NCS 600 Ø50xH30mm grit size 100 Product Description: aluminium oxide - especially for hard-to-reach areas - suitable for all straight grinders and drills with speed control - high stock removal and fine sanding pattern - for tough and sensitive surfaces - the fleece between the sanding flaps ensures an even finish - shaft Ø 6 mm Technical Data: - Colour: red-brown - Shank Ø: 6mm - Area of application: Stainless steel, universal metal - Binding: Synthetic resin - Width: 30mm - Maximum speed: 32m/s - Type of use: Straight grinder, Drill, Flexible shaft - Type of packaging: Cardboard boxFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 73.84

• 

  OGRO Ogro escutcheon set CORE+8100 8 mm / 3020N/6501/6612 PZ ER ( 3000700069 ) stainless steel DIN left / right flat D/K

  Sun, 11/30/2025

  Scope of Delivery: - 1x OGRO stainless steel escutcheon set Product Description: DIN left / right - square 8 mm - lever handle set = lever handle 8100 on both sides / lever handle set = outside knob 3020 / inside lever handle 8100 - for door thickness 38-63 mm / WC = 37-42 mm - tested to DIN EN 1906 (usage category class 4) Removal of the lever handle hole parts possible using standard circlip pliers. Optimum installation using M5 TORX screws Supplied as a complete set Technical Data: - Mounting system: Standard pin - Cam distance: 38mm - Material: Stainless steel - Design: Interchangeable fitting - Surface: matt - Shape: U-shape - Perforation: PZ - Colour no.: ER - for door thickness: 38 - 63 mm - Square: 8 mm - Utilisation category: 4 - Lever handle Ø: 20 mm - Escutcheon thickness: 9 mm - Lever handle length: 143 mm - Supplement: D/K - Handle depth: 64 mm - Knob: flat - Brand: OGRO - Hinge direction: DIN left / right - Rosette Ø: 55 mm - Standard: DIN 1906 - Model: CORE+8100 8 mm / 3020N/6501/6612 PZ ER - Rosette height: 9 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 69.92

• 

  PROMODORO PROMODORO Men's Sweatshirt 80/20 size L ( 4000377411 )

  Sun, 11/30/2025

  Scope of Delivery: - Men's sweatshirt 80/20 size L Product Description: 80% cotton / 20% polyester, approx. 280 g/m² - classic molleton blend sweatshirt - fluffy brushed inside - elastane cuffs on neck, arms and hem - certified according to OEKO-TEX® Made In Green: M21LRMK25 available sizes on request: S-3XL Technical Data: - Fabric weight approx.: 280g/m²For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 27.37

• 

  Ruko RUKO twist drill DIN 338 type N nominal Ø 13 mm HSS-Co5 ( 4000600099 )

  Sun, 11/30/2025

  Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 13 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 30mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 18.16

• 

  SSF SSF Panic tubular frame mortise lock E DIN left / right ( 3324024282 )

  Sun, 11/30/2025

  Scope of Delivery: - 1x SSF panic tubular frame mortise lock E DIN left / right Product Description: Change function E - for single-leaf framed doors - APE version - steel lock case closed at top and bottom - continuous fitting hole above the lock follower - chip protection sleeves - single throw with sturdy bolt - bolt throw 21 mm - can be used DIN left and right (reversible) - prepared for profile cylinder, with change - distance 92 mm - 9 mm one-piece follower - latch with noise reduction - nickel-plated deadbolt - stainless steel faceplate on centre - faceplate width 24 mm - faceplate length 245 mm - canted - backset 15 mm - classification key to EN 12 209 available - tested and certified to EN 1125 and EN 179 in accordance with the certificate of conformity. certificate of conformity Technical Data: - Bolt: nickel-plated - Backset: 15mm - Standard: DIN 18251-2 - Lock case: closed at top and bottom - Lock bolt: 1-turn - Bolt throw: 21mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 94.14

• 

  KLINGSPOR KLINGSPOR abrasive cloth roll KL 361JF 50 mm grit size 60 ( 4000845659 )

  Sun, 11/30/2025

  Scope of Delivery: - Abrasive cloth roll KL 361JF 50 mm grit size 60 Product Description: Aluminium oxide - for metalworking - synthetic resin-bonded abrasive cloth with dense aluminium oxide coating - highly flexible - for the highest sanding requirements - very good grain adhesion - high sanding performance - 50 m roll Technical Data: - nanFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 61.36

• 

  Makita Makita DCL 182 G1 cordless hoover 18 V + 1x rechargeable battery 6.0 Ah - without charger

  Sun, 11/30/2025

  Scope of Delivery: - 1x Makita DCL 182 cordless hoover - 5x hoover bag - 1x Makita BL 1860 B 18 V 6.0 Ah battery - without charger Product Description: The Makita DCL 182 is a powerful 18 V cordless hoover which is ideal for cleaning upholstered furniture, stairs or the workshop. This low-noise hoover with high suction power and two power levels can be used with either a paper or textile dust bag. Thanks to the battery capacity indicator, you can always keep an eye on the remaining power. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DCL 182 - Battery voltage: 18 V - Air volume: 1.4 m³/min - Max. Vacuum pressure: 54 mbar - Max. Max. dust container volume: 0.50 litres - Suction power level 1: 11 W - Suction power level 2: 30 W - Suction time level 1: 40 min - Suction time level 2: 20 min - Dimensions (LxWxH): 1004x115x151 mm - Sound pressure level: 71 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 118.89

• 

  HONEYWELL HOWARD LEIGHT HONEYWELL HOWARD LEIGHT ear muffs VeriShield(TM) VS130D dielectric ( 4000370350 )

  Sun, 11/30/2025

  Scope of Delivery: - VeriShield™ VS130D dielectric earmuffs Product Description: dielectric earmuffs - durable, non-deformable plastic headband and head attachments for working with electricity EN 352-1 (SNR)=36 dB (A) / H value = 38 dB (A) / M value = 34 dB (A) / L value = 25 dB (A) - Honeywell Sound Management Technology (SMT): suppresses harmful noise, but makes speech and signals more naturally audible. This technical innovation allows speech frequencies to be heard with less distortion. This reduces isolation and excessive protection at work. - Application: Building and construction, general industry, maintenance, utilities, etc., working with electricity Hearing protection is classified under category III (fatal or irreversible damage) according to the new PPE regulation. Before the first use, and once a year thereafter, the employer must inform the employees of the prevailing noise hazard and instruct them on suitable protective measures. Technical Data: - L-value: 25dB - Property: dielectric - M-value: 34dB - H-value: 38dBFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 33.33

• 

  PROMODORO PROMODORO Men's Double Fleece Jacket size XXL ( 4000379973 )

  Sun, 11/30/2025

  Scope of Delivery: - 1x PROMODORO Men's Double Fleece Jacket size XXL Product Description: 100% polyester, approx. 320 g/m² - with stand-up collar and full-length concealed zip - elastane cuffs on sleeves - 2 side pockets with zip - anti-pilling finish on both sides - fleece - slim fit - highly wind-repellent - breathable - quick-drying - easy-care - slightly rain-repellent available on request sizes: S-5XL also available in other colours Technical Data: - Fabric weight approx.: 320g/m²For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 33.49

Show more products