Alle Artikel mit Online Bestpreisen!

In dieser Kategorie findest Du alle Werkzeuge und Artikel für die wir zum Zeitpunkt des letzten Updates den Online Bestpreis innehatten! Um Dir die besten Preise anbieten zu können, vergleichen wir regelmäßig unsere Preise mit den Angeboten auf dem Preisvergleichsportal. Weitere Informationen zum Vergleich findest Du auf den Produktdetailseiten.

Übrigens findest Du viele Bestpreis-Artikel nur hier bei uns, da wir nicht alle Angebote zu Preisvergleichsportalen übermitteln - reinschauen lohnt sich!

Read more less

Show previous products

• 

  Metabo Metabo AG 18 cordless blower 18 V + 2x LiHD battery 8,0Ah + charger

  Wed, 11/12/2025

  Scope of Delivery: - 1x Metabo AG 18 cordless blower ( 602242850 ) - 2x Metabo LiHD 8,0Ah battery pack ( 625369000 ) CAS System - 1x Metabo ASC 145 charger ( 627378000 ) CAS system Product Description: Thanks to its robust design, the cordless blower is suitable for every application in the workshop and on the construction site. The blower's optimum centre of gravity and rubberised handle ensure good ergonomics. The Vario (V) electronics enable infinitely variable air speed when blowing. The adjusting wheel for preselecting 3 air speed levels enables flexible use of the appliance. For example, larger chips that would clog the suction hose of a hoover can be blown away. Spiral-shaped chips that easily get caught in the bristles of a broom can also be easily blown away. Crumbs or waste on an uneven floor, which a broom cannot pick up properly, can also be blown away using the supplied extension of the blow pipe. A rubberised end piece of the blow pipe protects sensitive surfaces. When it comes to blowing off chips, crumbs or waste from machines, workpieces, workplaces, etc. outdoors, the lightweight, compact cordless blower is exactly the right tool. Technical Data: - Voltage: 18 V - Idle speed (level 1): 0-11500 rpm - Idle speed (stage 2): 0-15000 rpm - Idle speed (level 3): 0-18000 rpm - Max. Air volume (level 1): 1.0 m³/min - Max. Air volume (stage 2): 1.55 m³/min - Max. Air volume (level 3): 2.6 m³/min - Max. Air speed: 74 m/s - Sound pressure level: 79 dB(A) - Sound power level: 90 dB(A) - Uncertainty (K): 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 316.72

• 

  Makita Makita DRS 780 M cordless circular saw 36V ( 2x18V ) 185 mm brushless + 2x battery 4,0Ah - without charger

  Wed, 11/12/2025

  Scope of Delivery: - 1x Makita DRS 780 Z cordless circular saw 36V ( 2x18V ) 185 mm - 1x Makita circular saw blade - 1x hexagon spanner 5 mm - 2x BL1840B 4,0 Ah battery - without charger Product Description: The Makita DRS 780 cordless circular saw impresses with its short and compact design. It achieves a maximum cutting depth of 65 mm with the 185 mm saw blade. The rear handle and additional handle ensure precise guidance. The machine's deep charge protection protects the batteries; when the portable circular saw realises that the batteries are almost empty, it switches off automatically. The left-sided positioning of the saw blade provides an optimum view of the cutting line. The speed of the machine is automatically regulated and thus perfectly adapted to the workpiece (ADT Automatic torque Drive Technology). The ADT display indicates an overload of the hand-held circular saw by flashing. The DRS 780 also has an easy-to-read scale and clear angle markers. Thanks to Xtreme Protection Technology (XPT), the DRS 780 is protected against dust and splash water, even under harsh conditions. Technical Data: - Max. Cutting capacity 90°: 65 mm - Max. Cutting capacity 45°: 45 mm - Max. Mitre left / right: 53/0 ° - Idle speed: 5100 min-¹ - Product dimensions (L x W x H): 446 x 196 x 270 mm - Saw blade Ø / bore: 185x30 mm - Sound power level (LWA): 103 dB(A) - Sound pressure level (LpA): 92 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 367.18

• 

  Makita Makita DRS 780 RF cordless circular saw 36V ( 2x18V ) 185 mm brushless + 2x rechargeable battery 3.0Ah + charger

  Wed, 11/12/2025

  Scope of Delivery: - 1x Makita DRS 780 Z cordless circular saw 36V ( 2x18V ) 185 mm - 1x Makita circular saw blade - 1x hexagon spanner 5 mm - 2x BL 1830 B battery with 3, 0 Ah - 18 V and LED charge level indicator - 1x Makita DC 18 RC 9.6 - 18 V battery quick charger for Li-Ion battery (195584-2) Product Description: The Makita DRS 780 cordless circular saw impresses with its short and compact design. It achieves a maximum cutting depth of 65 mm with the 185 mm saw blade. The rear handle and additional handle ensure precise guidance. The machine's deep charge protection protects the batteries; when the portable circular saw realises that the batteries are almost empty, it switches off automatically. The left-sided positioning of the saw blade provides an optimum view of the cutting line. The speed of the machine is automatically regulated and thus perfectly adapted to the workpiece (ADT Automatic torque Drive Technology). The ADT display indicates an overload of the hand-held circular saw by flashing. The DRS 780 also has an easy-to-read scale and clear angle markers. Thanks to Xtreme Protection Technology (XPT), the DRS 780 is protected against dust and splash water, even under harsh conditions. Technical Data: - Max. Cutting capacity 90°: 65 mm - Max. Cutting capacity 45°: 45 mm - Max. Mitre left / right: 53/0 ° - Idle speed: 5100 min-¹ - Product dimensions (L x W x H): 446 x 196 x 270 mm - Saw blade Ø / bore: 185x30 mm - Sound power level (LWA): 103 dB(A) - Sound pressure level (LpA): 92 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 367.70

• 

  Metabo Metabo AG 18 cordless blower 18 V + 1x LiHD battery 4.0 Ah + charger

  Wed, 11/12/2025

  Scope of Delivery: - 1x Metabo AG 18 cordless blower ( 602242850 ) - 1x Metabo LiHD battery pack 4.0 Ah ( 625367000 ) CAS system - 1x Metabo ASC145 charger ( 627378000 ) CAS system Product Description: Thanks to its robust design, the cordless blower is suitable for every application in the workshop and on the construction site. The blower's optimum centre of gravity and rubberised handle ensure good ergonomics. The Vario (V) electronics enable infinitely variable air speed when blowing. The adjusting wheel for preselecting 3 air speed levels enables flexible use of the appliance. For example, larger chips that would clog the suction hose of a hoover can be blown away. Spiral-shaped chips that easily get caught in the bristles of a broom can also be easily blown away. Crumbs or waste on an uneven floor, which a broom cannot pick up properly, can also be blown away using the supplied extension of the blow pipe. A rubberised end piece of the blow pipe protects sensitive surfaces. When it comes to blowing off chips, crumbs or waste from machines, workpieces, workplaces, etc. outdoors, the lightweight, compact cordless blower is exactly the right tool. Technical Data: - Voltage: 18 V - Idle speed (level 1): 0-11500 rpm - Idle speed (stage 2): 0-15000 rpm - Idle speed (level 3): 0-18000 rpm - Max. Air volume (level 1): 1.0 m³/min - Max. Air volume (stage 2): 1.55 m³/min - Max. Air volume (level 3): 2.6 m³/min - Max. Air speed: 74 m/s - Sound pressure level: 79 dB(A) - Sound power level: 90 dB(A) - Uncertainty (K): 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 172.48

• 

  DeWalt DeWalt DCW 200 D1 cordless vibrating sander 18 V 108x115 mm + 1x rechargeable battery 2.0 Ah + charger + TSTAK

  Wed, 11/12/2025

  Scope of Delivery: - 1x DeWalt DCW200NT cordless vibrating sander - 1x TSTAK case - 1x DeWalt rechargeable battery 2.0Ah - 1x DeWalt charger Product Description: The DeWalt DCW200 cordless vibratory sander from the orbital sander family impresses with its long service life and clean, material-appropriate removal. The sander impresses with its ergonomic design, which makes it easy to hold and comfortable to work with. DeWalt has equipped the tool with the fast Klettfix system, making it easy to replace the sandpaper. Other features include: Soft start, speed regulation and stabilisation, wireless tool control and an attachable dust extraction system. All in all, the DCW200 is an extremely reliable sanding tool with which you can achieve clean results quickly and, above all, gently. Technical Data: - Voltage: 18 V - Max. Oscillation speed: 13,500 rpm - Vibration circle: 1.6 mm - Sanding plate size: DE 108 x 115 mm - Triaxial vibration strength: 3.8 m/s² - Sound pressure level: 76 dB(A) - Sound power level: 87 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 182.78

• 

  Makita Makita DMP 180 G1 cordless compressor 18 V 8.3 bar 1x rechargeable battery 6.0 Ah - without charger

  Wed, 11/12/2025

  Scope of Delivery: - 1x Makita DMP 180 Z cordless compressor - 1x Makita BL1860B 6,0 Ah ( 197422-4 ) - 1x adapter for bicycle valve - 1x French adapter - 1x adapter for balls - without charger Product Description: When it comes to inflating car/bicycle tyres, sports balls or small swimming tyres, the cordless compressor is the ideal tool. The desired pressure can be precisely preset using the display and + / - buttons. When the desired pressure is reached, the compressor switches itself off to prevent over-inflation. The compressor reaches a pressure of up to 8.3 bar. The appliance is equipped with a tool/battery protection system. This system automatically switches off the power supply in the event of overload, overheating and over-discharge in order to extend the service life of the tool and battery. The hose is 0.65 m long. The tool is small enough to stow in the boot or tool bag to take it almost anywhere. The built-in LED and ergonomic handle design ensure increased comfort. Thanks to the adapters included in the scope of delivery, the compressor is suitable for quickly and easily inflating tyres, balls and much more. Technical Data: - Voltage: 18 V - Max. Pressure: 8.3 bar - Air flow rate: 12 l/min - Hose length: 0.65 m - Work cycle: 5 minutes on/5 minutes off - Total length: 251-266 mm - Sound pressure level: 70 dB (A) - Measurement uncertainty (K): 3 dB (A) - Vibration emission (inflation): 3.6 m/s2 - Measurement uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 146.61

• 

  DeWalt DeWalt DCW 200 NT cordless vibrating sander 18 V 108x115 mm + 1x rechargeable battery 2.0 Ah + TSTAK - without charger

  Wed, 11/12/2025

  Scope of Delivery: - 1x DeWalt DCW200NT cordless vibrating sander - 1x TSTAK case - 1x DeWalt rechargeable battery 2.0Ah - without charger Product Description: The DeWalt DCW200 cordless vibratory sander from the orbital sander family impresses with its long service life and clean, material-appropriate removal. The sander impresses with its ergonomic design, which makes it easy to hold and comfortable to work with. DeWalt has equipped the tool with the fast Klettfix system, making it easy to replace the sandpaper. Other features include: Soft start, speed regulation and stabilisation, wireless tool control and an attachable dust extraction system. All in all, the DCW200 is an extremely reliable sanding tool with which you can achieve clean results quickly and, above all, gently. Technical Data: - Voltage: 18 V - Max. Oscillation speed: 13,500 rpm - Vibration circle: 1.6 mm - Sanding plate size: DE 108 x 115 mm - Triaxial vibration strength: 3.8 m/s² - Sound pressure level: 76 dB(A) - Sound power level: 87 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 167.65

• 

  Makita Makita DMP 180 RT cordless compressor 18 V 8.3 bar + 2x rechargeable battery 5.0 Ah + charger

  Wed, 11/12/2025

  Scope of Delivery: - 1x Makita DMP 180 Z cordless compressor - 2x Makita BL1850B 5.0 Ah battery ( 197280-8 ) - 1x Makita DC18RC charger ( 195584-2 ) - 1x adapter for bicycle valve - 1x French adapter - 1x adapter for balls Product Description: When it comes to inflating car/bicycle tyres, sports balls or small swimming tyres, the cordless compressor is the ideal tool. The desired pressure can be precisely preset using the display and + / - buttons. When the desired pressure is reached, the compressor switches itself off to prevent over-inflation. The compressor reaches a pressure of up to 8.3 bar. The appliance is equipped with a tool/battery protection system. This system automatically switches off the power supply in the event of overload, overheating and over-discharge in order to extend the service life of the tool and battery. The hose is 0.65 m long. The tool is small enough to stow in the boot or tool bag to take it almost anywhere. The built-in LED and ergonomic handle design ensure increased comfort. Thanks to the adapters included in the scope of delivery, the compressor is suitable for quickly and easily inflating tyres, balls and much more. Technical Data: - Voltage: 18 V - Max. Pressure: 8.3 bar - Air flow rate: 12 l/min - Hose length: 0.65 m - Work cycle: 5 minutes on/5 minutes off - Total length: 251-266 mm - Sound pressure level: 70 dB (A) - Measurement uncertainty (K): 3 dB (A) - Vibration emission (inflation): 3.6 m/s2 - Measurement uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 228.30

• 

  Makita Makita DJR 186 RG1 cordless reciprocating saw 18 V + 1x rechargeable battery 6.0 Ah + charger

  Wed, 11/12/2025

  Scope of Delivery: - 1x Makita DJR 186 cordless recipro saw Reciprocating saw - 1x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery - 1x Makita DC 18 RC battery fast charger 7.2 V - 18 V ( 195584-2 ) Product Description: The power tool is designed for sawing wood, plastic and ferrous materials. The cordless reciprocating saw is suitable for spark-free and stable cutting of metal and demolition work. The Recipro saw is a very compact yet powerful reciprocating saw. The vertically arranged crank mechanism enables the lifting bar to move backwards more quickly. The electronic brake, the non-slip and ergonomic design and the tool-free saw blade change ensure the necessary safety and comfort when working. Thanks to the variable speed setting, the powerful and solid saw ensures rapid sawing progress. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DJR 186 - Battery voltage: 18 V - Battery system: LXT - Battery protection system: Yes - Idle stroke rate: 0 - 2800 min-¹ - Lifting height: 32 mm - Max. Cutting capacity wood 90°: 255 mm - Max. Max. cutting capacity pipe: 130 mm - Weight incl. battery (EPTA): 3.5 - 3.8 kg - Product dimensions (L x W x H): 486 x 81 x 223 mm - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 84 dB(A) - K-value noise: 3 dB(A) - Vibration: 13.0 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 218.49

• 

  Makita Makita DJR 187 Cordless Reciprocating Saw 18 V Brushless Reciprocating Saw + 1x 6.0 Ah battery - without charger

  Wed, 11/12/2025

  Scope of Delivery: - 1x Makita DJR 187 18 V Li-Ion cordless reciprocating saw - 1x 6.0 Ah battery - without charger, without case Product Description: With this practical recipro saw from Makita, you can achieve very fast sawing progress. Effective dust protection prevents the ingress of dust and dirt. The saw blade can also be changed without tools. This saw is very light and easy to handle. There is also an adjustable guide shoe for optimum utilisation of the saw blade. With LED light. Technical Data: - Idle stroke speed level 1: 0 - 2,300 min-1 - Idle stroke speed level 2: 0 - 3,000 min-1 - Stroke height: 32 mm - Max. Max. cutting capacity pipe: 130 mm - Max. Cutting capacity wood 90°: 255 mm - Battery voltage: 18 V - Dimensions (LxWxH) mm: 439x83x231 - Weight: 3.4 kg - Sound pressure level (LpA): 84 dB(A) - Sound power level (LWA): 95 dB(A) - K-value noise: 3 dB(A) - Vibration sawing wood panel: 16.5 m/s² - Vibration sawing in wooden beams: 15.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 269.97

• 

  DeWalt DeWalt DCH 133 D2 Cordless combi hammer 18V 2.6J SDS plus Brushless + 2x rechargeable battery 2.0Ah + charger + TSTAK

  Wed, 11/12/2025

  Scope of Delivery: - 1x DeWalt DCH 133 NT 18.0 V cordless combi hammer - 1x DeWalt case - 1x additional handle - 2x Dewalt DCB 183 18V/ 2.0 Ah Li-Ion battery - 1x DeWalt DCB charger Product Description: The DeWalt DCH 133 NT 18.0 V cordless combi hammer has an innovative, brushless motor. The innovative, brushless motor technology ensures higher performance and a longer service life. An attached safety clutch protects the user and the machine. A rotary stop ensures easy chiselling work in tile and plaster. The cordless combi hammer is ideal for use with existing 18.0 V XR Li-Ion batteries. Technical Data: - Tool holder: SDS-plus - Max. Drilling capacity (concrete): 26mm - Max. Drilling capacity (core bits): 50mm - Max. Drilling capacity (wood): 30mm - Max. Drilling capacity (metal): 13mm - Idle rotation time: 0-1550/min - Idle impact time: 0-5680/min - Single impact energy: 2.6 joules - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 224.99

• 

  Makita Makita DTD 156 RT1J cordless impact wrench 18V 155Nm + 1x rechargeable battery 5.0Ah + charger + Makpac

  Wed, 11/12/2025

  Scope of Delivery: - 1x Makita DTD156 cordless impact wrench - 1x Makita BL1850B 5.0 Ah rechargeable battery - 1x Makita DC18RC charger - 1x Makita Makpac incl. universal insert - 1x belt clip Product Description: The cordless impact wrench is designed for driving screws into wood, metal and plastic. The impact wrench impresses with its ergonomic and compact design. With the 1/4" hexagon socket, various attachments can be changed quickly and easily. The tool switches off automatically during operation if the tool and/or battery are overloaded or the remaining battery capacity is low. This helps to extend battery life. The ergonomic handle with soft coating ensures a high level of comfort when working with this power tool. The aluminium gear housing with protective coating makes the impact wrench robust and ensures maximum durability. Setting the left/right rotation is easy thanks to the integrated slide switch in the handle. The powerful LED dual lighting also makes it easy to work in less well-lit areas. Technical Data: - Battery voltage: 18 V - Hard torque: 155 Nm - Tool holder: 1/4" hexagon socket - Max. Idle speed: 0-2500 rpm - Max. No-load impact speed: 0-3000 min-1 - Machine screws: M4-M8 - High-strength screws: M5-M12 - Standard screws: M5-M14 - Coarse thread tapping screws (length): 22-125 mm - Net weight: 1.3-1.6 kg - Sound pressure level: 92 dB (A) - Sound power level: 103 dB (A) - Uncertainty (K): 3 dB (A) - Vibration emission value: 10 m/s² - Uncertainty (K): 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 179.85

Show more products