Accessories for Sanders
-
Festool Festool Rotex RO 90 DX FEQ-Plus 400 W 90 mm ( 576259 ) + Systainer - successor to 571819
Fri, 09/26/2025
Lieferumfang:- 1x Festool RO 90 DX Getriebe Exzenterschleifer- 1x Schleifteller ST-STF D90/7 FX W-HT- 1x StickFix Schleifschuh V 93- 1x Protector Festool 90FX- 1x Systainer SYS3 M 187Produktbeschreibung:Der Getriebe Exzenterschleifer RO 90 DX von Festool eignet sich hervorragend zum Abschleifen von Farben und Lack, wie z.B. an Fensterrahmen. Durch die handliche Ergonomie, mit optimalen Griffmöglichkeiten und das geringe Gewicht sind sogar Arbeiten an senkrechten Flächen, über Kopf und an schwer erreichbaren Stellen sehr komfortabel durchzuführen. Selbst sehr spezielle Anwendungen, wie das Schleifen von Nut- und Federbrettverbindungen und das Durchführen von Spot-Repair Anwendungen im Karosseriebereich stellen für den RO 90 DX kein Problem dar. Das Gerät überzeugt mit den vielfältigen Einsatzmöglichkeiten und vereint Grob-, Fein-, Polier- und Eckenschliff in einem Gerät. Mit der Rotex Kurvenbahn erfolgt ein sehr starker Abtrag und durch die Exzenterbewegung können hochwertige und riefenfreie Oberflächen erzeugt werden. Mit Hilfe des Festool Protectors kann selbst sehr nah an Rändern gearbeitet werden und mit dem FastFix-System kann der Schleifteller schnell, mühe- und werkzeuglos gewechselt werden. Festool ist ein Premiumhersteller für Elektrowerkzeuge, der sich vor allem durch seine lange Tradition und seine sehr hohe Verarbeitungsqualität auszeichnet.Technische Daten:Hersteller: FestoolHerstellerbezeichnung: Rotex RO 90 DX FEQ-PlusHerstellernummer: 576259Leistungsaufnahme: 400 WDrehzahl ROTEX Kurvenbahn: 260 - 520 min⁻¹Drehzahl Exzenterbewegung: 3500 - 7000 min⁻¹Schleifhub: 3,00 mmFastFix Schleifteller Ø: 90,00 mmAnschluss Staubabsaugung Ø: 27 mmProduktgewicht: 1,40 kgAntriebsart: NetzGesamt-Schwingungsmittelwert ah: 5 m/s²Normenreihe EN: 60745-2-4Unsicherheit (Lärm) K: 3 dBA-bewerteter Schallleistungspegel Lw Ecken- / Fein- / Grobschliff / Polieren: 92 / 89 / 89 / 89 dB(A)A-bewerteter Schalldruckpegel Lp Ecken- / Fein- / Grobschliff / Polieren: 81 / 78 / 78 / 78 dB(A)Unsicherheit (Vibration) K Ecken- / Fein- / Grobschliff / Polieren: 2 / 1,5 / 1,5 / 1,5 m/s²Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
CHF 545.17 CHF 424.32
-
Metabo Metabo FMS 200 Intec multi-sander 200 W 100 x 147mm ( 600065500 ) + case
Scope of Delivery: - 1x Metabo FMS 200 Intec multi-sander - 1x dust collection cassette - 1x pleated filter - 1x case Product Description: The FMS 200 INTEC multi-sander from Metabo is a handy and efficient electronic sander. The triangular sanding plate is ideal for sanding edges, corners and surfaces. The FMS 200 is a lightweight and handy machine for convenient one-handed operation. In addition, the FMS 200 has a very good weight/performance ratio for long periods of work. The soft grip surface with its non-slip grip area ensures a good hold. For work without connecting a vacuum cleaner, the multi-sander comes with a dust collection cassette including filter. A mobile dust extractor can be connected using an adapter (not included). Metabo is a manufacturer of high-quality electrical appliances with years of experience. Technical Data: - Manufacturer: Metabo - Manufacturer's designation: FMS 200 Intec - Manufacturer's number: 600065500 - Sanding plate: 100 x 147 mm - Rated power input: 200 W - Idle speed: 13000 /min - Vibration rate at idle: 26000 /min - Vibration circle: 1.4 mm - Weight without mains cable: 1.2 kg - Cable length: 2.8 m - Vibration surface grinding: 5.5 m/s² - Vibration measurement uncertainty K: 1.5 m/s² - Noise emission Sound pressure level: 78 dB(A) - Noise emission sound power level (LwA): 89 dB(A) - Measurement uncertainty K: 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
Einhell Einhell TC-OS 18/187 Li-Solo cordless orbital sander 18 V 94 x 187 mm ( 4460725 ) Solo - without battery, without charger
Scope of Delivery: - 1x Einhell TC-OS 18/187 Li-Solo cordless orbital sander - 1x 80 grit sandpaper - without battery, without charger Product Description: The Einhell TC-OS 18/187 Li-Solo cordless orbital sander is a lightweight and handy helper from the Power X-Change family, which is perfect for sanding flat surfaces, large workpieces, panelling or panels. Thanks to the flexible Power X-Change system, the orbital sander can be used cordlessly and can be operated with all rechargeable batteries in the series. Sanding paper can be changed quickly and easily thanks to the micro hook-and-loop fastener or the clamping device, which means that conventional sanding paper without hook-and-loop fasteners can also be used. The large grip surfaces with soft grip ensure comfortable handling, enabling fatigue-free sanding even during long periods of work. The integrated dust collection bag collects the sanding dust produced, while a connection for an external dust extraction system ensures even greater cleanliness at the workplace. The orbital sander is also supplied with sandpaper Technical Data: - Manufacturer: Einhell - Manufacturer's designation: TC-OS 18/187 Li-Solo - Manufacturer number: 4460725 - Suction connection diameter: 35 mm - Motor voltage: 18 V - Motor type: Brush motor - Product weight: 1.17 kg - Sanding paper width: 94 mm - Sandpaper length: 187 mm - Oscillating circuit: 2 mm - Max. oscillation rate: 24000 min^-1 - Minimum oscillation rate: 24000 min^-1 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
Makita Makita DBO480ZJ Cordless Finishing Sander 112 x 102 mm 18V + Case - without Battery, without Charger
Fri, 09/26/2025
Package contents: - 1x Makita DBO 480 Cordless Finishing Sander - 1x Dust box - 1x Universal insert - 1x Case - Without Battery - without Charger Product description: The cordless Finishing sander DBO480Z from Makita is a powerful machine with an efficient dust extraction system. This tool is distinguished by its easy handling, ergonomic design, 1.5 mm oscillation range and two-stage adjustable oscillation speed. In addition, the Makita DBO480Z is equipped with a dust box, which is ideal for low-dust work, and an external hoover connection, which ensures maximum suction while minimizing the amount of dust. In addition, this machine has a Velcro or lever-operated sanding paper. Makita is one of the leading manufacturers of power tools, which is characterized above all by a long tradition and excellent manufacturing quality. Technical specifications: Manufacturer: Makita Manufacturer's designation: DBO 480 Nominal Battery Voltage: 18 V Voltage LXT: Yes Sanding Orbit Diameter: 1.5 mm Weight incl. battery (EPTA): 1.4 - 1.7 kg Product dimensions (L x W x H): 171 x 112 x 152 mm Battery type (Ni-Cd / Li-ion): Li-ion: System: LXT 18V/36V Orbits per Minute: 11 000 / 14 000 min-¹ Sanding Pad Dimensions: 112 x 102 mm Dimensions of Clamped Abrasive Sheet: 114 x 140 mm Vacuum cleaner connection Ø in / out: 17/22 mm Sound Pressure Level (LpA): 75 dB(A) Noise Uncertainty (K Factor): 3 dB(A) Vibration Level (3 axes): ≤ 2.5 m/s² Vibration Uncertainty (K Factor): 1.5 m/s²
CHF 105.76
-
Festool Festool RTSC 400 3,0I-Plus Cordless Orbital Sander 80x130mm Brushless 18V + 2x Batteries 3.0Ah + Charger + Case Systainer (577686)
Fri, 09/26/2025
Package contents: - 1x Festool RTSC 400 Cordless Orbital Sander - 1x StickFix sanding pad SSH-STF-80x130/12 - 1x Chip collection bag SB-Longlife RTS/DTS/ETS - 1x Protector Festool PR RTS-R 80x133 - 2x Batteries Festool BP 18 Li 3,0 Ergo I 3,0Ah 18V (577704) - 1x Charger Festool TCL 6 (201135) - 1x Case Festool Systainer SYS3 M 187 Product description: The RTSC 400 cordless orbital sander from FESTOOL offers mobility and guarantees power similar to that of a mains-powered tool. It is equipped with a brushless EC motor for maximum power. Thanks to its compact design, light weight and ergonomic shape, it guarantees optimum endurance on the job. The integral dust extraction system, in combination with the long-life dust collection bag, enables the machine to be used flexibly. The device is particularly suitable for use at height and in hard-to-reach places. It is also equipped with the Festool PROTECTOR, which ensures smooth sanding along windows, frames and panelling. Technical specifications: Manufacturer: Festool Manufacturer's Number: 576347 Manufacturer's designation: RTSC 400 Battery Voltage: 18V No-load speed: 6,000-10,000min-1M No. of strokes: 12,000-20,000min-¹ Sanding stroke: 2mm Interchangeable sanding pad: 80x130mm Dust extraction connection diameter: 27mm
CHF 441.42
-
Festool Festool RTS 400 REQ-Plus chute 125 W 80 x 130 mm ( 576057 ) + systainer - successor to 574634
Fri, 09/26/2025
Scope of Delivery: - 1x Festool RTS 400 REQ-Plus chute 125 W 80 x 130 mm - 1x Festool PROTECTOR - 1x Longlife dust bag - 1x StickFix sanding pad 80 x 130 mm - 1x Systainer SYS3 M 187 Product Description: The Festool RTS 400 REQ-Plus slide is a compact one-handed slide that is characterised by fatigue-free overhead sanding. Thanks to its weight of just 1.2 kg, it is a real lightweight in its class. The newly developed MMC control electronics, which guarantee up to 25 % higher removal rates at a constantly powerful speed, make sanding fun and ensure rapid progress. The well thought-out details make all the difference. These include: the integrated Longlife dust collection bag for dust-free work, the Softgrip inserts in the handle area and the PROTECTOR edge protection for less reworking. The CLEANTEC connection system enables the connection of a mobile dust extractor (not included). Main applications include: vertical and overhead work, one-handed sanding of edges and surfaces, sanding paint and varnish from window frames, sanding natural wood and veneers before varnishing and sanding a wide variety of materials close to the edge. Festool is a premium manufacturer of power tools and is characterised by its well thought-out concepts and high quality standards. Technical Data: - Manufacturer: Festool - Manufacturer number: 576057 - Successor of: 574634 - Power consumption: 250 W - Idle speed: 6 000 - 12 000 min-¹ - Working strokes: 12 000 - 24 000 min-¹ - Sanding stroke: 2 mm - Replaceable sanding pad: 80 x 130 mm - Dust extraction connection Ø: 27 mm - Weight: 1.2 kg - Drive type: Mains - Sanding: Total vibration mean value ah: 2.5 m/s² - Grinding: A-weighted sound pressure level Lp: 73 dB(A) - Loops: EN 60745 series of standards: 62841-2-4 - Grinding: Uncertainty (vibration) K: 1.5 m/s² - Grinding: A-weighted sound power level Lw: 84 dB(A) - Grinding: Uncertainty (noise) K: 3 dB - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 341.06
-
Makita Makita BO 5031 J Random orbital sander 300 watt 125 mm + Makpac
Fri, 09/26/2025
Scope of Delivery: - 1x Makita BO 5031 random orbital sander - 1x dust container - 1x sandpaper 125 mm K 120 - 1x Makita Makpac case - 1x suitable insert Product Description: The BO 5031 from Makita is a 300 watt and handy random orbital sander with a diameter of 125 mm. The random orbital sander has a high-performance motor with double protective insulation, which keeps dust away, and robust ball bearings, which significantly extend its service life. The new feature of this device compared to its predecessor is the electronic speed preselection, which allows the number of strokes to be precisely controlled and therefore a higher and more effective removal rate to be achieved. The multiple gripping options equipped with rubber inserts and the large oscillating circuit also ensure a high removal rate in comfortable working conditions, while the run-out brake protects the material being processed. The dust box supplied also effectively collects the dust produced, making it easier to keep the workplace clean. Technical Data: - Manufacturer: Makita - Manufacturer's designation: BO5031 - Power consumption: 300 W - Idle oscillation: 4000 - 12000 min-¹ - Sanding disc diameter: 125 mm - Oscillating circuit: 2.8 mm - Paper dust bag: Yes - Length of mains cable: 2.0 m - Weight without cable: 1.3 kg - Product dimensions (L x W x H): 153 x 123 x 153 mm - Suction hose connection Ø inside / outside: 18 / 22 mm - Sound power level (LWA): 92 dB(A) - Sound pressure level (LpA): 80 dB(A) - K-value noise: 3 dB(A) - Vibration: 4.0 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 101.80
-
Bosch Professional Bosch EXPERT AVZ 90 RT2 sanding disc Starlock 90 mm K20 1 pc. ( 2608900045 ) Multi-material carbide - successor to 2608664351
Fri, 09/26/2025
Lieferumfang:- 1x Bosch EXPERT AVZ 90 RT2 Schleifplatte Starlock 90 mmProduktbeschreibung:Die AVZ 90 RT2 Schleifplatte bietet dank der Bosch Carbide Technology eine herausragende Lebensdauer beim bearbeiten von verschiedenen Materialien, wie Mörtel, Leim, GFK, CFK und Hartholz. Dabei hält es bis zu 100-mal länger als herkömmliches Schleifpapier. Dank der Delta-Form eignet es sich perfekt zum Schleifen von Ecken und Kanten. Durch die 20er Körnung ist ein rauer, aber auch schneller Abtrag garantiert. Zusätzlich sorgt die Starlock Aufnahme für eine maximale Kraftübertragung und bequemen Klingenwechsel innerhalb weniger Sekunden und ist dank des herstellerübergreifenden Aufnahmesystems mit vielen Maschinen einsetzbar. Das Bosch EXPERT Sortiment ist das innovativste Zubehör für Elektrowerkzeuge mit nachgewiesenen Leistungsvorteilen, um jeden Profi Handwerker höchst effizientes Arbeiten zu ermöglichen. Extrem lange Lebensdauer, maximale Präzision, arbeiten mit Höchstgeschwindigkeit und staubfreieres Schleifen: all das ist mit Bosch EXPERT möglich.Technische Daten:Hersteller: BoschHerstellerbezeichnung: EXPERT AVZ 90 RT2 SchleifplatteHerstellernummer: 2608900045Aufnahme: StarlockDurchmesser: 90 mmKörnung: 20Kornmaterial: CarbideWerkstoffe: Mörtel, Leim, Faserkunststoffe GFK / CFK, HartholzBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
CHF 17.07
-
Festool Festool sanding discs STF D150/48 P80 GR/50 50 pcs. 150 mm / 50 pcs. ( 575162 )
Fri, 09/26/2025
Lieferumfang:- 50x Festool Schleifscheiben STF D150/48 P80 GR/50 ( 575162 )Produktbeschreibung:Die Festool Schleifscheiben eignen sich bestens für Arbeiten an Lacksystemen,Kunststoffen, Mineralwerkstoffen, Acryl, Spachtel, Füller oder besonders harten Oberflächen. Durch die Absauglöcher wird die Oberfläche flächendeckend abgesaugt, wodurch die Oberfläche des Arbeitsstücks permanent sauber gehalten werden kann. Zusätzlich bleibt auch die Schleifleistung konstant, wodurch die Schleifmittel länger genutzt werden können. Das widerstandsfähige Material schützt vor Einreißen und durch eine extra Kantenstabilität ist ein perfektes Ergebnis erreichbar, ganz ohne Kratzer oder Nacharbeiten. Technische Daten:Durchmesser: 150 mmKörnung: P80 Packungsinhalt: 50 StückBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
CHF 27.72
-
Einhell Einhell TE-AD 18 Li-Solo cordless angle drill 18 V 15 Nm ( 4514290 ) Solo - without battery, without charger
Fri, 09/26/2025
Scope of Delivery: - 1x Einhell TE-AD 18 Li-Solo cordless angle drill - without battery, without charger Product Description: Thanks to its compact and angled shape, the Einhell TE-AD 18 Li-Solo cordless angle drill makes it possible to screw and drill in hard-to-reach corners, such as in narrow drawers. Its rotating battery holder further contributes to its flexibility. The machine is easy to operate thanks to a large switch that allows many different grip positions. It is part of the Power X-Change product family and is therefore compatible with its batteries and chargers. The drill offers a maximum torque of 45 Nm and achieves an idle speed of up to 1,100 revolutions per minute, which enables powerful screwdriving and drilling. A metal gearbox ensures efficient power transmission and the speed can be precisely adjusted. The quick-release drill chuck with a clamping width of 10 mm changes bits and drill bits quickly and easily. An in-built LED light improves visibility, while clockwise and anti-clockwise rotation makes screwing and unscrewing easier. The slim design with soft grip surfaces makes the tool easy to handle. Please note that the battery and charger are not included in the scope of delivery and must be purchased separately. Technical Data: - Manufacturer: Einhell - Manufacturer's description: TE-AD 18 Li-Solo - Manufacturer number: 4514290 - Number of gears Gearbox: 1 - Torque (hard): 15 Nm - Handle diameter: 40 mm - Gearbox material: Metal - Max. Capacity drill chuck: 10 mm - Min. capacity drill chuck: 1 mm - Min. PXC battery recommendation: All batteries - Motor voltage: 18 V - Afterglow time LED light: 10 s - Product weight: 1.22 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 53.93
-
Makita Makita DGA 519 Z Cordless angle grinder 18 V 125 mm X-LOCK Brushless Solo - without battery, without charger
Scope of Delivery: - 1x Makita DGA 519 cordless angle grinder - 1x side handle 36 cpl. ( 158237-4 ) - 1x protective cover 125 mm (347618-9) - 1x X-LOCK grinding disc (E-00402) - without battery, without charger Product Description: The handy DGA519 angle grinder from Makita impresses with its compact design and easy tool change thanks to the X-Lock mount. The brushless motor is powerful and promises more endurance and a long service life. Thanks to the electronically adjustable speed, material-specific application is no problem. The paddle switch and the additional handle offer the user comfortable handling, allowing long working days without significant fatigue. A 125 mm disc diameter enables a wide range of accessories such as roughing discs, cutting discs, grinding discs and much more. Thanks to the keyless X-Lock system, insert tools can be changed quickly and easily. Thanks to Makita AFT technology, the electric motor brake switches the motor off if the speed suddenly slows down or the disc stops. In addition, the angle grinder is labelled XPT, which means that improved protection is installed inside the tool. This means that the most important components are well protected. Makita is a leading manufacturer of power tools, a long tradition and a high quality standard characterise the company. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DGA519 - Battery voltage: 18 V - Battery system: LXT - Battery type: Li-ion - Brushless motor: Yes - Idle speed: 3000 - 8500 min-¹ - Bore: 22.23 mm - Max. Disc Ø: 125 mm - Restart protection: Yes - Anti-restart function: Yes - Motor brake: Yes - Vibration values, surface grinding: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), surface grinding: 1.5 m/s² - Vibration values, surface grinding (roughing): 7.0 m/s² - Vibration uncertainty factor (K value), surface grinding (roughing): 1.5 m/s² - Sound power level (LWA): 91 dB(A) - Sound pressure level (LpA): 83 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 396 x 140 x 147 mm - Weight incl. battery: 2.5 - 3.1 kg - Max. Cutting depth: 29 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
Makita Makita DGA 520 ZX1 Cordless angle grinder 18 V 125 mm X-LOCK Brushless Solo - without battery, without charger
Fri, 09/26/2025
Scope of Delivery: - 1x Makita DGA 520 cordless angle grinder - 1x side handle 36 cpl. ( 158237-4 ) - 1x protective cover 125 mm ( 347618-9 ) - without battery, without charger Product Description: The Makita DGA520 cordless angle grinder is a powerful and handy helper for demanding jobs. With a maximum disc diameter of 125 mm, it is versatile and impresses with its innovative X-LOCK quick-change system, which enables the grinding discs to be changed quickly and easily. Safety is the top priority with this angle grinder: The Active Feedback sensing technology automatically stops the machine if a blockage occurs, thus preventing dangerous kickback. The DGA520 is also equipped with restart protection, which prevents unintentional start-up after a power interruption. The combination of convenience, safety and efficiency makes this cordless angle grinder the ideal tool for demanding users. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DGA520 - Battery voltage: 18 V - Battery system: LXT - Battery type: Li-ion - Brushless motor: Yes - Idle speed: 8500 min-¹ - Bore: 22.23 mm - Max. Disc Ø: 125 mm - Restart protection: Yes - Anti-restart function: Yes - Motor brake: Yes - Vibration values, surface grinding (roughing): 7.0 m/s² - Vibration uncertainty factor (K value), surface grinding (roughing): 1.5 m/s² - Sound power level (LWA): 91 dB(A) - Sound pressure level (LpA): 83 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 376 x 140 x 147 mm - Weight incl. battery: 2.4 - 3.0 kg - Product weight: 1.8 kg - Max. Cutting depth: 32 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 192.24
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"