Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Accessories for Sanders

Show previous products

KLINGSPOR KLINGSPOR flap disc KM 613 Ø60xH30mm grit 40 ( 4000844363 )

Fri, 11/21/2025

Scope of Delivery: - 1x KLINGSPOR flap disc KM 613 Ø60xH30mm grit size 40 Product Description: Aluminium oxide - especially for hard-to-reach areas - suitable for all straight grinders and drills with speed control - adaptable flap structure and even removal rate - workpieces with complex surfaces and shapes are processed effortlessly - cool grinding that prevents tarnishing on the workpiece - shank Ø 6 mm Technical Data: - Colour: brown - Shank Ø: 6mm - Area of application: Stainless steel, universal metal - Binding: Synthetic resin - Width: 30mm - Maximum speed: 40m/s - Type of use: Straight grinder, Drill, Flexible shaft - Type of packaging: Cardboard boxFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 41.29
KLINGSPOR KLINGSPOR flap disc NCS 600 Ø50xH30mm grit 100 ( 4000844371 )

Fri, 11/21/2025

Scope of Delivery: - 1x KLINGSPOR flap disc NCS 600 Ø50xH30mm grit size 100 Product Description: aluminium oxide - especially for hard-to-reach areas - suitable for all straight grinders and drills with speed control - high stock removal and fine sanding pattern - for tough and sensitive surfaces - the fleece between the sanding flaps ensures an even finish - shaft Ø 6 mm Technical Data: - Colour: red-brown - Shank Ø: 6mm - Area of application: Stainless steel, universal metal - Binding: Synthetic resin - Width: 30mm - Maximum speed: 32m/s - Type of use: Straight grinder, Drill, Flexible shaft - Type of packaging: Cardboard boxFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 73.01
Options

PFERD PFERD flap disc Ø15xH10mm grit size 80 ( 4000842572 )

Scope of Delivery: - Flap disc Ø15xH10mm grit size 80 Product Description: Synthetic resin bond - universally applicable - also suitable for machining brass, copper and zinc - Shank ∅ 3 mm Technical Data: - Shank Ø: 3mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. - Machinable materials: Cast steel, steels up to 1,200 N/mm² ( 54 HRC - Machining tasks: Weld seam processing, deburring, fine grinding in stages, levelling, surface processing, structuring (matting, line matting and satin finishing) - Width: 10mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 25000RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Optimum contour adaptation due to high flexibility. Consistently high material removal rate over the entire service life, as new, aggressive abrasive is constantly released. Can be used very close to edges and at angles thanks to the flat cast core design.For commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 9.44

Options
PFERD PFERD flap disc Ø40xH15mm grit size 80 ( 4000841616 )

Fri, 11/21/2025

Scope of Delivery: - Flap sander Ø40xH15mm grit size 80 Product Description: aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm - also suitable for processing brass, copper and zinc Technical Data: - Shank Ø: 6mmFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 9.75
KLINGSPOR KLINGSPOR flap disc KM 613 Ø50xH30mm grit size 80 ( 8000352807 )

Fri, 11/21/2025

Scope of Delivery: - 1x KLINGSPOR flap disc KM 613 Ø50xH30mm grit size 80 Product Description: Aluminium oxide - especially for hard-to-reach areas - suitable for all straight grinders and drills with speed control - adaptable flap structure and even removal rate - workpieces with complex surfaces and shapes are processed effortlessly - cool grinding that prevents tarnishing on the workpiece - shank Ø 6 mm Technical Data: - Colour: brown - Shank Ø: 6mm - Area of application: Stainless steel, universal metal - Binding: Synthetic resin - Width: 30mm - Maximum speed: 40m/s - Type of use: Straight grinder, Drill, Flexible shaft - Type of packaging: Cardboard boxFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 42.30
PFERD PFERD flap disc Ø80xH30mm grit 60 ( 8000429789 )

Fri, 11/21/2025

Scope of Delivery: - 1x PFERD flap disc Ø80xH30mm grit size 60 Product Description: aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm - also suitable for processing brass, copper and zinc Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Steels up to 1,200 N/mm² ( 54 HRC - Machining tasks: Weld seam processing, deburring, fine grinding in stages, levelling, surface processing, structuring (matting, line matting and satin finishing) - Width: 30mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 4800RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat casting core design.For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 12.84
KLINGSPOR KLINGSPOR flap disc KM 613 Ø50xH30mm grit 40 ( 8000352805 )

Fri, 11/21/2025

Scope of Delivery: - 1x KLINGSPOR flap disc KM 613 Ø50xH30mm grit size 40 Product Description: Aluminium oxide - especially for hard-to-reach areas - suitable for all straight grinders and drills with speed control - adaptable flap structure and even removal rate - workpieces with complex surfaces and shapes are processed effortlessly - cool grinding that prevents tarnishing on the workpiece - shank Ø 6 mm Technical Data: - Colour: brown - Shank Ø: 6mm - Area of application: Stainless steel, universal metal - Binding: Synthetic resin - Width: 30mm - Maximum speed: 40m/s - Type of use: Straight grinder, Drill, Flexible shaft - Type of packaging: Cardboard boxFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 42.30
Options

KLINGSPOR KLINGSPOR flap disc KM 613 Ø50xH30mm grit size 120 ( 8000352800 )

Scope of Delivery: - 1x KLINGSPOR flap disc KM 613 Ø50xH30mm grit size 120 Product Description: Aluminium oxide - especially for hard-to-reach areas - suitable for all straight grinders and drills with speed control - adaptable flap structure and even removal rate - workpieces with complex surfaces and shapes are processed effortlessly - cool grinding that prevents tarnishing on the workpiece - shank Ø 6 mm Technical Data: - Colour: brown - Shank Ø: 6mm - Area of application: Stainless steel, universal metal - Binding: Synthetic resin - Width: 30mm - Maximum speed: 40m/s - Type of use: Straight grinder, Drill, Flexible shaft - Type of packaging: Cardboard boxFor commercial use, please observe the building regulations!

Read more less

Pre-order
CHF 42.92

Options
Options

KLINGSPOR KLINGSPOR Fächerschleifer KM 613 Ø50xH30mm Körnung 100 ( 8000352799 )

Lieferumfang:1x KLINGSPOR Fächerschleifer KM 613 Ø50xH30mm Körnung 100Produktbeschreibung: Korund · speziell für schwer zugängliche Stellen · geeignet für alle Geradschleifer und Bohrmaschinen mit einer Drehzahlregulierung · anpassungsfähige Lamellenstruktur und gleichmäßige Abtragsleistung · Werkstücke mit komplexen Oberflächen und Formen werden mühelos bearbeitet · kühler Schliff, der Anlauffarben am Werkstück verhindert · Schaft-Ø 6 mm Weitere technische Daten: Farbe: braun Schaft-Ø: 6mm Anwendungsgebiet: Edelstahl, Metall Universal Bindung: Kunstharz Breite: 30mm Höchstgeschwindigkeit: 40m/s Nutzungsart: Geradschleifer, Bohrmaschine, Biegsame Welle Verpackungsart: Karton

Read more less

Pre-order
CHF 42.92

Options
KLINGSPOR KLINGSPOR flap disc KM 613 Ø50xH20mm grit 120 ( 8000352791 )

Fri, 11/21/2025

Scope of Delivery: - 1x KLINGSPOR flap disc KM 613 Ø50xH20mm grit size 120 Product Description: Aluminium oxide - especially for hard-to-reach areas - suitable for all straight grinders and drills with speed control - adaptable flap structure and even removal rate - workpieces with complex surfaces and shapes are processed effortlessly - cool grinding that prevents tarnishing on the workpiece - shank Ø 6 mm Technical Data: - Colour: brown - Shank Ø: 6mm - Area of application: Stainless steel, universal metal - Binding: Synthetic resin - Width: 20mm - Maximum speed: 40m/s - Type of use: Straight grinder, Drill, Flexible shaft - Type of packaging: Cardboard boxFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 34.87
Options

KLINGSPOR KLINGSPOR Fächerschleifer KM 613 Ø40xH15mm Körnung 80 ( 8000352769 )

Lieferumfang:1x KLINGSPOR Fächerschleifer KM 613 Ø40xH15mm Körnung 80Produktbeschreibung: Korund · speziell für schwer zugängliche Stellen · geeignet für alle Geradschleifer und Bohrmaschinen mit einer Drehzahlregulierung · anpassungsfähige Lamellenstruktur und gleichmäßige Abtragsleistung · Werkstücke mit komplexen Oberflächen und Formen werden mühelos bearbeitet · kühler Schliff, der Anlauffarben am Werkstück verhindert · Schaft-Ø 6 mm Weitere technische Daten: Farbe: braun Schaft-Ø: 6mm Anwendungsgebiet: Edelstahl, Metall Universal Bindung: Kunstharz Breite: 15mm Höchstgeschwindigkeit: 40m/s Nutzungsart: Geradschleifer, Bohrmaschine, Biegsame Welle Verpackungsart: Karton

Read more less

Pre-order
CHF 33.73

Options
PFERD PFERD flap disc Z-COOL Ø80xH50mm grit size 80 ( 4144150345 )

Fri, 11/21/2025

Scope of Delivery: - 1x PFERD flap disc Z-COOL Ø80xH50mm grit size 80 Product Description: zirconium aluminium oxide - for machining stainless steels and high-temperature alloys - high grinding performance - no clogging of the flaps - for coarse grinding tasks with high cutting performance and cool grinding - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and result in cooler grinding - shank Ø 6 mm Technical Data: - Shank Ø: 6mmFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 16.38