Accessories for Sanders
-
PFERD PFERD mounted point POLINOX ( 8000435052 ) D80xHmm 6 mm cylindrical
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD mounted point D80xHmm 6 mm Product Description: made of polyamide fleece - abrasive fleece is arranged in discs (axially) on top of each other Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Use at a recommended cutting speed of 10-20 m/s for best performance. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear. - Machinable materials: Steels up to 1,200 N/mm² ( 54 HRC, brass, titanium, zinc, stainless steel (INOX), titanium alloys - Machining tasks: Deburring, fine grinding in stages, roughening, structuring (matting, line matting and satin finishing), cleaning, surface finishing - Width: 50mm - Note: PFERDERGONOMICS recommends POLINOX mounted points in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shank: 40mm - RPM, opt.: 4000RPM - Safety instructions: The maximum permissible peripheral speed is 32 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. - Advantages: Optimum contour adaptation due to high flexibility. Cool grinding and low thermal load on the workpiece. No clogging of the tool due to the open structure and high flexibility of the non-woven material. - Shape: cylindrical - Grit size: 280 - Shank Ø: 6 mm - Max. speed: 7500 min-¹ - Bond: other - Content: 10 pieces - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Aluminium oxide A - Ø: 80 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 169.64
-
PFERD PFERD flap disc TRIM STEELOX ( 8001720483 ) Ø 125 mm grain size 60 conical
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grain size 60 conical Product Description: Zirconium aluminium oxide Z - for steel and stainless steel (INOX) - with plastic backing pad for resetting/trimming the tool - bore 22.23 mm Ø Technical Data: - Bore: 22,23mm - Drive type: Angle grinder - Recommendation for use: The support disc may be set back a maximum of 5 mm so that the flaps protrude. Position the tool carefully and increase the pressure until a chip is created. Hold the pressure until the tool has been trimmed to the desired size. Trimming may only be carried out at an angle of 45°. Trim the flap disc on sharp metal edges, files or with indexable inserts. - Mounting system: Bore - Machinable materials: Steel, stainless steel (INOX) - Note: PFERDERGONOMICS recommends POLIFAN flap discs in order to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends POLIFAN flap discs for perfect results in the shortest possible time. - Advantages: Also suitable for low-power angle grinders. Good tool life. Resetting/trimming of the tool is possible without any problems. Fast work progress and high efficiency thanks to high cutting performance. - Shape: conical - Ø: 125 mm - Grit size: 60 - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: Zirconium aluminium oxide Z - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
PFERD PFERD flap disc ( 8000429655 ) Ø20xH10mm grit 60 shank Ø 6 mm
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø20xH10mm grit 60 Product Description: aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: The removal rate should be increased by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be processed, the coarser the surface (when using , Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), copper, aluminium, malleable cast iron, stainless steel (INOX), cast steel, hardened and tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!).For commercial use, please observe the building regulations!
CHF 9.20
-
PFERD PFERD flap disc TRIM STEELOX ( 8001720484 ) Ø 125 mm grain size 80 conical
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grain size 80 conical Product Description: Zirconium aluminium oxide Z - for steel and stainless steel (INOX) - with plastic backing pad for resetting/trimming the tool - bore 22.23 mm Ø Technical Data: - Bore: 22,23mm - Drive type: Angle grinder - Recommendation for use: Trimming may only be carried out at an angle of 45°. Trim the flap disc on sharp metal edges, files or with indexable inserts. The support disc may be set back a maximum of 5 mm from the flaps. Position the tool carefully and increase the pressure until a chip is created. Hold the pressure until the tool has been brought to the desired dimension. - Mounting system: Bore - Machinable materials: Steel, stainless steel (INOX) - Note: PFERDERGONOMICS recommends POLIFAN flap discs to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends POLIFAN flap discs for perfect results in the shortest possible time. - Advantages: Also suitable for low-power angle grinders. Resetting/trimming of the tool is possible without any problems. Good tool life. Fast work progress and high efficiency thanks to high cutting performance. - Shape: conical - Ø: 125 mm - Grit size: 80 - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: Zirconium aluminium oxide Z - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 41.86
-
PFERD PFERD flap disc TRIM STEELOX ( 8001720488 ) Ø 125 mm grain size 40 PFC / B / T29
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grain size 40 PFC / B / T29 Product Description: Zirconium aluminium oxide Z - for steel - with plastic backing pad for resetting/trimming the tool - bore 22.23 mm Ø Technical Data: - Bore: 22,23mm - Drive type: Angle grinder - Application recommendation: Also suitable for surface grinding on steel. The backing pad may be set back a maximum of 5 mm beyond the flaps. Position the tool carefully and increase the pressure until a chip is created. Hold the pressure until the tool has been brought to the desired dimension. Trim the flap disc on sharp metal edges, files or with indexable inserts. Trimming may only be carried out at an angle of 45°. - Mounting system: Bore - Machinable materials: Stainless steel (INOX), steel - Note: PFERDERGONOMICS recommends POLIFAN flap discs in order to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends POLIFAN flap discs for perfect results in the shortest possible time. - Advantages: The tool can be reset/trimmed without any problems. Fewer tool changes due to outstanding tool life. Maximum aggressiveness over the entire service life. Fast work progress and maximum efficiency thanks to aggressive cutting performance. - Shape: PFC / B / T29 - Ø: 125 mm - grit size: 40 - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: Zirconium aluminium oxide Z - Application: Steel / stainless steel - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 58.01
-
PFERD PFERD flap disc TRIM STEELOX ( 8001720482 ) Ø 125 mm grain size 40 conical
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grain size 40 conical Product Description: Zirconium aluminium oxide Z - for steel and stainless steel (INOX) - with plastic backing pad for resetting/trimming the tool - bore 22.23 mm Ø Technical Data: - Bore: 22,23mm - Drive type: Angle grinder - Recommended use: Trim the flap disc on sharp metal edges, files or with indexable inserts. Trimming may only be carried out at an angle of 45°. The support disc may be set back a maximum of 5 mm so that the flaps protrude. Position the tool carefully and increase the pressure until a chip is created. Hold the pressure until the tool has been brought to the desired dimension. - Mounting system: Bore - Machinable materials: Stainless steel (INOX), steel - Note: PFERDERGONOMICS recommends POLIFAN flap discs to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends POLIFAN flap discs for perfect results in the shortest possible time. - Advantages: Fast work progress and high efficiency thanks to high cutting performance. Resetting/trimming of the tool is possible without any problems. Also suitable for low-power angle grinders. Good tool life. - Shape: conical - Ø: 125 mm - Grit size: 40 - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: Zirconium aluminium oxide Z - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 41.86
-
PFERD PFERD flap disc POLIFAN FORCE ( 4000842461 ) Ø 125 mm grit size 60
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grain size 60 Product Description: Fast grinding due to constant grinding aggressiveness right down to the last abrasive grain - Cost-effective due to maximum stock removal per unit of time and lower disc consumption - Long service life - For case-hardened steels, stainless steel (INOX), steel - Applications: Chamfering, deburring, levelling, surface processing, weld seam processing, edge processing (chamfering, rounding) - Drive types: Angle grinder, cordless angle grinder - Bore 22.23 mm Ø Technical Data: - Ø: 125 mm - grit size: 60 - max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: Zirconium aluminium oxide Z - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 68.35
-
PFERD PFERD flap disc POLIFAN FORCE ( 4000842460 ) Ø 125 mm grain size 40
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grain size 40 Product Description: Fast grinding due to constant grinding aggressiveness right down to the last abrasive grain - Cost-effective due to maximum stock removal per unit of time and lower disc consumption - Long service life - For case-hardened steels, stainless steel (INOX), steel - Applications: Chamfering, deburring, levelling, surface processing, weld seam processing, edge processing (chamfering, rounding) - Drive types: Angle grinder, cordless angle grinder - Bore 22.23 mm Ø Technical Data: - Ø: 125 mm - grit size: 40 - max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: Zirconium aluminium oxide Z - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 68.35
-
PFERD PFERD flap disc POLIFAN A PSF STEELOX ( 8000429632 ) Ø 125 mm grain size 120 conical
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grain size 120 conical Product Description: Aluminium oxide - tool for universal grinding tasks on stainless steel (INOX), steel - with high cutting performance and good tool life - for surface grinding and weld seam processing - very good grinding results are achieved even with low contact pressure - bore 22.23 mm Ø Technical Data: - Bore: 22.23mm - Drive type: Cordless angle grinder, angle grinder - Machinable materials: Steel, stainless steel (INOX) - Note: PFERDERGONOMICS recommends POLIFAN flap discs in order to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends POLIFAN flap discs for perfect results in the shortest possible time. - Advantages: Good service life. Also ideal for cordless angle grinders. Fast work progress and high efficiency thanks to high cutting performance. - Shape: conical - Ø: 125 mm - grit size: 120 - Max. speed: 12200 min-¹ - Width: 12 mm - Material suitability INOX: very suitable - Abrasive: Aluminium oxide A - Application: Steel/wood - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 39.17
-
PFERD PFERD flap disc POLIFAN A PSF STEELOX ( 8000429633 ) Ø 125 mm grain size 80 conical
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grain size 80 conical Product Description: Aluminium oxide - tool for universal grinding tasks on stainless steel (INOX), steel - with high cutting performance and good tool life - for surface grinding and weld seam processing - very good grinding results are achieved even with low contact pressure - bore 22.23 mm Ø Technical Data: - Bore: 22.23mm - Drive type: Cordless angle grinder, angle grinder - Machinable materials: Stainless steel (INOX), steel - Note: PFERDERGONOMICS recommends POLIFAN flap discs to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends POLIFAN flap discs for perfect results in the shortest possible time. - Advantages: Good service life. Fast work progress and high efficiency thanks to high cutting performance. Also ideal for cordless angle grinders. - Shape: conical - Ø: 125 mm - Grit size: 80 - Max. speed: 12200 min-¹ - Width: 14 mm - Material suitability INOX: very suitable - Abrasive: Aluminium oxide A - Application: Steel/INOX - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 39.17
-
PFERD PFERD felt flap disc ( 8000430460 ) Ø 125 mm hard version
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD felt flap disc Ø 125 mm Product Description: for pre-polishing and high-gloss polishing on medium to large components - due to their hardness and flexibility, they are used when geometric shapes must be precisely maintained - for use with polishing pastes - bore 22.23 mm Ø Technical Data: - Drive type: Cordless angle grinder, angle grinder - Application recommendation: Use the hard version for pre-polishing flat surfaces. If very fine surfaces are to be achieved, the hard and soft versions can be used one after the other. - Version: H (hard) - Machinable materials: Brass, copper, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, stainless steel (INOX), cast steel, nickel-based alloys (e.g. Inconell and Hasteloy), cobalt-based alloys, fibre-reinforced thermosets (GRP, CFRP), aluminium, thermoplastics, bronze - Machining tasks: Polishing - Width: 22mm - Ø bore: 22.23mm - RPM, opt.: 1500RPM - Advantages: Optimum contour adaptation due to high flexibility. Can be freely profiled and can therefore also be used for tools with complicated geometries. Low thermal load on the workpiece. - RPM, max.: 7650RPM - Ø: 125 mm - Version: hard - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 149.81
-
PFERD PFERD fibre disc COMBICLICK COOL ( 8000430251 ) Ø 115 mm grit size 36 VICTOGRAIN-COOL
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD fibre disc Ø 115 mm grit size 36 Product Description: VICTOGRAIN abrasive grain - Combiclick quick-clamping system - robust holder, secure locking of the tool and integrated cooling system result in up to 30 % lower workpiece temperature, 25 % higher cutting performance, 30 % longer tool life and better utilisation of the abrasive compared to conventional tools Technical Data: - Drive type: Cordless angle grinder, angle grinder - Application recommendation: Use COMBICLICK fibre sanders with the COMBICLICK backing pad on standard angle grinders. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. Use a powerful angle grinder. - Machinable materials: Hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 90.32
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"