Accessories for Sanders
-
PFERD PFERD grinding disc ( 8000435141 ) D125xS4.1mm Bore 22.23 mm
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD grinding disc D125xS4.1mm Product Description: for steel and stainless steel (INOX) with high grinding efficiency and good service life - bore 22.23 mm Ø Technical Data: - Drive type: Angle grinder - Application recommendation: Ideally suited for root seam processing. - Machinable materials: Steel, stainless steel (INOX) - Machining tasks: Chamfering, deburring, gouging, root seam processing, surface grinding, weld seam processing, fillet weld processing - Width: 4.1 mm - Abrasive: Aluminium oxide A - Advantages: Also suitable for low-power angle grinders. Soft grinding characteristics, very good stock removal even with low contact pressure. Can be used universally on steel and stainless steel (INOX). Good tool life. Fast work progress and high efficiency thanks to high grinding efficiency. - Shape: cranked - Ø: 125 mm - Disc thickness: 4.1 mm - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Bore: 22.23 mm - Material suitability steel: very suitable - Brand: PFERD - Design: PSF STEELOXFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 30.73
-
PFERD PFERD abrasive star POLINOX ( 8000434403 ) Ø 19 mm grit 280
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD sanding star Ø 19 mm grit 280 Product Description: suitable for cleaning, deburring and fine sanding of internal surfaces and contours for materials such as stainless steel (INOX), steel, ALU/NE and other materials - the sanding fleece is stacked in layers in a star shape and bonded together in the centre - it is particularly suitable for narrow working areas such as drill holes and recesses and hard-to-reach areas Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Use at a recommended cutting speed of 10-20 m/s for best performance. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear. - Number of layers: 2 pieces - Machinable materials: Titanium, titanium alloys, zinc, steel materials with a hardness > 54 HRC, thermoplastics, aluminium, brass, bronze, cast steel, cobalt-based alloys, copper, fibre-reinforced thermosets (GRP, CFRP), hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 10.96
-
PFERD PFERD abrasive star POLINOX ( 8000434402 ) Ø 19 mm grit size 100
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD sanding star Ø 19 mm grit size 100 Product Description: suitable for cleaning, deburring and fine sanding of internal surfaces and contours for materials such as stainless steel (INOX), steel, ALU/NE and other materials - the sanding fleece is stacked in layers in a star shape and bonded together in the centre - it is particularly suitable for narrow working areas such as drill holes and recesses and hard-to-reach areas Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Use at a recommended cutting speed of 10-20 m/s for best performance. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear. - Number of layers: 2 pieces - Machinable materials: Titanium alloys, zinc, aluminium, brass, bronze, cast steel, cobalt-based alloys, copper, fibre-reinforced thermosets (GRP, CFRP), nickel-based alloys (e.g. Inconell and Hasteloy), titanium, thermoplastics, steels up to 1,200 N/mm² ( 54 HRC, stainless steel (INOX), hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 11.37
-
PFERD PFERD grinding disc COMBIDISC ( 4000844552 ) Ø 50 mm grit size 80
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD grinding disc Ø 50 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding in industry and trade Technical Data: - Ø: 50 mm - grit size: 80 - Max. speed: 13000 min-¹ - Abrasive: Aluminium oxide - Material suitability Aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Model: COMBIDISC - Material suitability plastic: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 134.40
-
PFERD PFERD grinding disc COMBIDISC ( 4000844542 ) Ø 38 mm grit size 80
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD grinding disc Ø 38 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding in industry and trade Technical Data: - Ø: 38 mm - grit size: 80 - Max. speed: 16000 min-¹ - Abrasive: Aluminium oxide - Material suitability Aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Model: COMBIDISC - Material suitability plastic: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
CHF 96.85
-
PFERD PFERD Schleifscheibe COMBIDISC ( 4000844541 ) Ø 38 mm Körnung 60
Lieferumfang:- 1x PFERD Schleifscheibe Ø 38 mm Körnung 60Produktbeschreibung:Korund A · für den universellen Einsatz von Grob- bis Feinschliff in Industrie und HandwerkTechnische Daten:- Ø: 38 mm- Körnung: 60 - max. Drehzahl: 16000 min-¹- Schleifmittel: Normalkorund - Werkstoffeignung Aluminium: sehr gut geeignet - Werkstoffeignung Guss: sehr gut geeignet - Werkstoffeignung Stahl: sehr gut geeignet - Marke: PFERD - Modell: COMBIDISC - Werkstoffeignung Kunststoff: sehr gut geeignetBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
PFERD PFERD grinding disc CC-GRIND-ROBUST SGP STEELOX ( 8000793518 ) D125xSmm Bore 22.23 mm
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD grinding disc D125xSmm Product Description: for steel and stainless steel (INOX) with high grinding efficiency and maximum service life - bore 22.23 mm Ø Technical Data: - Drive type: Angle grinder - Recommendation for use: Trim the CC-GRIND-ROBUST on sharp metal edges, files or with indexable inserts. Trimming may only be carried out at an angle of 45°. Select the CC-GRIND-ROBUST SGP STEELOX if the fastest possible work progress is required. For optimum performance, use with a flat angle of attack. Only use with the surface, not suitable for peripheral grinding. Apply the tool carefully and increase the pressure until a chip is created. Hold the pressure until the tool has been brought to the desired dimension. - Machinable materials: Steel, stainless steel (INOX) - Machining tasks: Weld seam processing, surface grinding, fine grinding in stages, deburring, chamfering - Mould: CC-GRIND-ROBUST - Note: PFERDERGONOMICS recommends CC-GRIND-ROBUST with VICTOGRAIN abrasive grain in order to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends CC-GRIND-ROBUST with VICTOGRAIN abrasive grain for long, fatigue-free and resource-saving work with perfect results in the shortest possible time. - Ø bore: 22.23 mm - Abrasive: VICTOGRAIN - Advantages: The tool can be reset/trimmed without any problems. Ultimate aggressiveness for the fastest work progress. Glass fibre reinforced plastic backing plate guarantees equally robust and safe use. Much more ergonomic than a grinding disc: noise, vibrations and dust are significantly reduced. A significantly better surface finish is also achieved. Compared to flap discs, flat surfaces can be achieved thanks to the dimensional stability. Thanks to the customised geometry, the use of a special clamping flange set is not necessary. Although the VICTOGRAIN tools only have one abrasive grain layer, they offer an outstanding tool life - longer than roughing discs and many flap discs. Unlike fibre discs, the CC-GRIND-ROBUST does not deform even under extreme climatic conditions and is significantly more robust in rough use. - Ø: 125 mm - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Bore: 22.23 mm - Material suitability steel: very suitable - Design: Steel / stainless steel - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 58.00
-
PFERD PFERD abrasive sleeve holder ( 8000433965 ) D19xH25mm Shank-Ø 6 mm
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD abrasive sleeve carrier D19xH25mm Product Description: made of rubber - cylindrical shape - the slots facilitate the expansion of the body during sanding, which tensions the abrasive sleeve and increases elasticity - the belt is non-slip - the abrasive sleeves can be pulled on and off with a slight clockwise rotation Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. To make it easy to change the abrasive sleeves, turn them slightly clockwise to mount and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Design: not specified - Width: 25mm - Hardness: 65-70 - Length, shaft: 35mm - PFERD type: GK - RPM, min.: 20000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. - Advantages: Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Maximum efficiency thanks to particularly high material removal and high abrasive aggressiveness. - Ø: 19 mm - Height: 25 mm - Shank Ø: 6 mm - Shape: Cylinder - Max. speed: 30000 min-¹ - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 19.55
-
PFERD PFERD POLICAP sanding cap carrier ( 4000842445 ) D5xH10mm
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD sanding cap carrier D5xH10mm Product Description: made of rubber - for holding POLICAP abrasive caps Technical Data: - Shape: ZYA-cylindrical - Shank Ø: 3 mm - max. speed: 95000 min-¹ - Brand: PFERD - Ø: 5 mm - Height: 10 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 12.30
-
PFERD PFERD abrasive sleeve holder ( 4200002013 ) D60xH30mm shank Ø 6 mm
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD abrasive sleeve carrier D60xH30mm Product Description: made of rubber - cylindrical shape - the slots facilitate the expansion of the body during sanding, which tensions the abrasive sleeve and increases elasticity - the belt is non-slip - the abrasive sleeves can be pulled on and off with a slight clockwise rotation Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. To make it easy to change the abrasive sleeves, turn them slightly clockwise to mount and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Design: not specified - Width: 30mm - Hardness: 65-70 - Length, shaft: 35mm - PFERD type: GK - RPM, min.: 6500RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. - Advantages: Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Maximum efficiency thanks to particularly high material removal and high abrasive aggressiveness. - Ø: 60 mm - Height: 30 mm - Shank Ø: 6 mm - Shape: Cylinder - Max. speed: 9500 min-¹ - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 24.52
-
PFERD PFERD abrasive sleeve holder ( 4200002011 ) D30xH30mm shank Ø 6 mm
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD abrasive sleeve carrier D30xH30mm Product Description: made of rubber - cylindrical shape - the slots facilitate the expansion of the body during sanding, which tensions the abrasive sleeve and increases elasticity - the belt is non-slip - the abrasive sleeves can be pulled on and off with a slight clockwise rotation Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. - Design: not specified - Width: 30 mm - Hardness: 65-70 - Length, shaft: 35mm - PFERD type: GK - RPM, min.: 13000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. - Advantages: Maximum efficiency due to particularly high material removal and high aggressiveness of the abrasive. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. - Ø: 30 mm - Height: 30 mm - Shank Ø: 6 mm - Shape: Cylinder - Max. speed: 19100 min-¹ - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 18.92
-
PFERD PFERD abrasive sleeve holder ( 4144200130 ) D10xH20mm Shank-Ø 6 mm
Thu, 09/11/2025
Scope of Delivery: - 1x PFERD abrasive sleeve carrier D10xH20mm Product Description: made of rubber - cylindrical shape - the slots facilitate the expansion of the body during sanding, which tensions the abrasive sleeve and increases elasticity - the belt is non-slip - the abrasive sleeves can be pulled on and off with a slight clockwise rotation Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. For best performance, use at a recommended cutting speed of 20-30 m/s. - Design: not specified - Width: 20mm - Hardness: 65-70 - Length, shaft: 35mm - PFERD type: GK - RPM, min.: 30000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. - Advantages: Maximum efficiency due to particularly high material removal and high aggressiveness of the abrasive. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. - Ø: 10 mm - Height: 20 mm - Shank Ø: 6 mm - Shape: Cylinder - Max. speed: 44000 min-¹ - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
CHF 18.92
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"