Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Drill Bits

Show previous products

Ruko RUKO twist drill DIN 338 type INOX nominal Ø 1.5 mm ( 4000600424 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 1.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.03mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 15.60
Ruko RUKO twist drill DIN 338 type N nominal Ø 13 mm ( 4000600259 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 13 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.21 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 30.50
Ruko RUKO twist drill DIN 338 type N nominal Ø 5 mm ( 4000600169 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 13.50
Ruko RUKO twist drill DIN 338 type N nominal Ø 17 mm HSS-Co5 ( 4000600107 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 17 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 35mmFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 27.01
Ruko RUKO twist drill DIN 338 type N nominal Ø 16 mm HSS-Co5 ( 4000600105 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 16 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 30mmFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 25.24
Ruko RUKO twist drill DIN 338 type N nominal Ø 13.5 mm HSS-Co5 ( 4000600100 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 13.5 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 30mmFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 19.52
Ruko RUKO twist drill DIN 338 type N nominal Ø 12.5 mm HSS-Co5 ( 4000600098 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 12.5 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 30mmFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 17.50
Ruko RUKO twist drill DIN 338 type N nominal Ø 11 mm HSS-Co5 ( 4000600095 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 11 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 30mmFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 15.93
Ruko RUKO twist drill DIN 338 type N nominal Ø 10.5 mm HSS-Co5 ( 4000600094 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 10.5 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 30mmFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 15.17
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 8.5 mm ( 4000600508 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 8.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.13 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 39.56
Alpen ALPEN FORCE X 7-piece hammer drill set X SDS-plus ( 8000671164 )

Thu, 12/04/2025

Scope of Delivery: - FORCE X 7-piece hammer drill set X SDS-plus Product Description: 4 solid carbide cutting edges prevent hooking in the event of reinforcement strikes Technical Data: - Packaging: Plastic box - Application: SDS-plus high-performance drill bit with 4 solid carbide cutting edges and new progressive spiral design with dowel length indicator. Easy drilling through iron armouring, low-vibration operation and fast drill dust feed.For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 39.88
FAMAG FAMAG Forstner bit set Bormax 1622 5-piece ( 4000863751 )

Thu, 12/04/2025

Scope of Delivery: - Forstner bit set Bormax 1622 5 pieces - Supplied complete in wooden box Product Description: with centre point - straight shank with hexagonal shank from Ø 20 mm - 2 main cutting edges and serrated peripheral cutting edges with transverse grooves - universal drill bit for professional drilling with significantly lower feed forces - long tool life with maximum drilling quality - working length 57 mm - total length 90 mm Technical Data: - nanFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 100.31