Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Drill Bits

Show previous products

Ruko RUKO twist drill DIN 340 type N nominal Ø 5 mm ( 4000600959 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 5 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 22.39
Ruko RUKO twist drill DIN 340 type N nominal Ø 4.5 mm ( 4000600954 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 4.5 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 20.05
Ruko RUKO twist drill DIN 340 type N nominal Ø 4 mm ( 4000600949 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 4 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 17.78
Ruko RUKO twist drill DIN 340 type N nominal Ø 2.5 mm ( 4000600938 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 2.5 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 14.20
Ruko RUKO twist drill set DIN 338 type VA nominal Ø 1-13x0.5 mm ( 4000600882 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill set DIN 338 type VA nominal Ø 1-13x0.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130° - profile ground - with straight shank - right-hand cutting - high-performance drill bit for all normal drilling work in steel and cast iron - in impact-resistant and break-proof plastic case Technical Data: - Quality: profile-groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 90.58
Ruko RUKO twist drill set DIN 338 type VA nominal Ø 1-10x0.5 mm ( 4000600881 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill set DIN 338 type VA nominal Ø 1-10x0.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130° - profile ground - with straight shank - right-hand cutting - high-performance drill bit for all normal drilling work in steel and cast iron - in impact-resistant and break-proof plastic case Technical Data: - Quality: profile-groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 47.74
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 13 mm ( 4000600533 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 13 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.17 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 58.47
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 12.5 mm ( 4000600532 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 12.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 53.57
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 12 mm ( 4000600531 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 12 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 44.54
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 11.5 mm ( 4000600530 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 11.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 43.35
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 11 mm ( 4000600529 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 11 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 37.87
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 3.5 mm ( 4000600448 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 3.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.07mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 16.79