Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Drill Bits

Show previous products

HELLER HELLER hammer drill Trijet Ultimate D.10,0mm Working-L.100mm L.160mm ( 4300000174 )

Thu, 12/04/2025

Scope of Delivery: - Hammer drill Trijet Ultimate D.10,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 15.88
HELLER HELLER Hammer drill Trijet Ultimate D.5,0mm Working-L.100mm L.160mm ( 4300000171 )

Thu, 12/04/2025

Scope of Delivery: - Hammer drill Trijet Ultimate D.5,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 13.07
HELLER HELLER hammer drill Trijet Ultimate D.6,0mm Working-L.50mm L.110mm ( 4300000170 )

Thu, 12/04/2025

Scope of Delivery: - Hammer drill Trijet Ultimate D.6,0mm Working-L.50mm L.110mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 13.07
Ruko RUKO step drill bit drilling range 5.3 - 30.5 mm ( 4000601758 )

Thu, 12/04/2025

Scope of Delivery: - Step drill Drilling range 5.3 - 30.5 mm Product Description: HSS - spiral fluted - with cross cut - 2 cutting edges - for metric cable glands - point angle 118 ° - step angle 90 ° - shank with 3 clamping surfaces Technical Data: - Point angle: 118° - Step angle: 90° - Groove: spiral grooved - Number of cutting edges: 2For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 56.84
Ruko RUKO step drill bit drilling range 6 - 37 mm ( 4000601725 )

Thu, 12/04/2025

Scope of Delivery: - Step drill Drilling range 6 - 37 mm Product Description: HSS-Co5 - spiral fluted - with cross cut - 2 cutting edges - point angle 118 ° - step angle 90 ° - shank with 3 clamping surfaces Technical Data: - Point angle: 118° - Step angle: 90° - Groove: spiral grooved - Number of cutting edges: 2For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 84.75
Ruko RUKO twist drill DIN 345 type N nominal Ø 24 mm ( 4000601325 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 24 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK3 - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 49.18
Ruko RUKO twist drill DIN 345 type N nominal Ø 11 mm ( 4000601299 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 11 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK1 - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 18.56
Ruko RUKO twist drill DIN 340 type N nominal Ø 9 mm ( 4000600999 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 9 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep-hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.18 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 41.45
Ruko RUKO twist drill DIN 340 type N nominal Ø 8 mm ( 4000600989 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 8 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 37.86
Ruko RUKO twist drill DIN 340 type N nominal Ø 6.5 mm ( 4000600974 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 6.5 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.13 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 28.73
Ruko RUKO twist drill DIN 340 type N nominal Ø 6 mm ( 4000600969 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 6 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.12 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 24.04
Ruko RUKO twist drill DIN 340 type N nominal Ø 5.5 mm ( 4000600964 )

Thu, 12/04/2025

Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 5.5 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.11 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
CHF 23.77