All Tools

Show previous products

• 

  Metabo Metabo BH 18 LTX BL 16 cordless hammer drill 18 V 1.3 J SDS plus Brushless + 5-piece drill and chisel set + metaBOX - without battery, without charger

  Sun, 11/16/2025

  Scope of Delivery: - 1x Metabo BH 18 LTX BL 16 cordless hammer drill - 1x additional handle - 1x Drilling depth stop - 1x metaBOX 145L - 1x Metabo drill and chisel set SP 5 pcs. consisting of: - 3x hammer drill 160 mm ( 6.0 / 8.0 / 10.0 mm ) - 1x pointed chisel 250 mm - 1x flat chisel 20 x 250 mm - 1x box - without battery, without charger Product Description: The BH 18 LTX BL 16 cordless hammer with SDS-plus tool holder is a very lightweight, compact cordless hammer which, thanks to its brushless motor and Metabo Vibratechh (MTV), ensures fatigue-free and healthy working, even in continuous use. The brushless technology and high-performance impact mechanism also ensure maximum drilling performance, efficiency and service life. The integrated Vario-Tacho-Constamatic (VTC) full-shaft electronics support work with material-appropriate speeds that remain constant under load. Its LED work light provides a clear view of the drilling site. The hammer drill has two functions: hammer drilling and drilling. For your own safety, the rotary hammer drill has an electronic safety cut-out when the insert tool jams. The Metabo BH 18 LTX BL 16 is ideal for drilling in stone and concrete, but can also be used for chiselling work or removing tiles. Metabo is a renowned supplier of power tools and stands for high-quality products "from professionals for professionals". Technical Data: - Manufacturer: Metabo - Manufacturer's description: BH 18 LTX BL 16 - Manufacturer number: 600324840 - Battery voltage: 18V - Max. Single impact energy (EPTA): 1.3 J - Max. Impact rate: 5250 / min - Drilling Ø concrete with hammer drill bits: 16 mm - Drilling Ø masonry with drill bits: 68 mm - Drilling Ø steel: 13 mm - Drilling Ø softwood: 20 mm - Idle speed: 0 - 730 /min - Tool holder: SDS-plus - Weight (with battery pack): 1.9 kg - Vibration hammer drilling concrete: 12.7 m/s² - Vibration measurement uncertainty K: 1.5 m/s² - Noise emission Sound pressure level: 87 dB(A) - Noise emission sound power level (LwA): 98 db(A) - Noise emission measurement uncertainty K: 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 185.18

• 

  BS Systems BS Systems Kleinteileeinsatz 4 Mulden LB 136 ( 1000010127 )

  Sun, 11/16/2025

  Lieferumfang:- 1 x Kleinteileeinsatz 4 Mulden LB 136Produktbeschreibung:Der Kleinteileeinsatz 4 Mulden LB 136 ist aus hochwertigem tiefgezogenem Kunststoff hergestellt und bietet eine kostengünstige Möglichkeit zur Organisation und Aufbewahrung von Kleinteilen. Dank der 4 Mulden ermöglicht der Einsatz eine übersichtliche Einteilung verschiedener Kleinteile. Er ist kompatibel mit der L-BOXX 136 und der LS-BOXX und bietet somit flexible Einsatzmöglichkeiten in verschiedenen Boxensystemen.Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

  Read more less

  1 - 2 business days

  CHF 11.14

• 

  Festool Festool SYS3 S 76 Systainer tool case 265 x 171 x 76 mm 5.0 kg load capacity ( 577808 ) for Systainer Rack

  Sun, 11/16/2025

  Scope of Delivery: - 1x Festool SYS3 S 76 Systainer tool case 265 x 171 x 76 mm - 4x short divider - 1x long divider Product Description: The Festool SYS3 S 76 Systainer tool case is a must for all tradesmen and DIY enthusiasts who value flexible and modular storage of their tools. Thanks to the dividers supplied, the contents can be organised individually so that every handle fits and no tool is lost. But that's not all, because the SYS3 S 76 is also modularly expandable. The Systainer³ Rack can be used to create even more options for storage and transport. The Systainer³ S 76 is also compatible with other Systainer models as well as the SYS-MINI 1 and 3 TL, enabling a space-saving and practical combination. Transporting the tool case is also mobile and uncomplicated thanks to the Systainer³ rack. The Systainer³ S 76 can be easily integrated into the bott vario3 van racking system so that the tools are always to hand and can be transported safely. Festool also offers a separately available universal insert for even clearer organisation of small parts and hand tools. This means that even small parts are safely stowed away and always ready to hand. Please note that the SYS3 S 76 cannot be combined with the Systainer³, Systainer T-LOC or Systainer Classic. For optimum utilisation, we therefore recommend the use of Systainer³ models. Technical Data: - Manufacturer: Festool - Manufacturer's designation: SYS3 XXL 237 - Manufacturer number: 204850 - Dimensions (L x W x H): 265 x 171 x 71 mm - Dimensions with feet (L x W x H): 265 x 171 x 76 mm - Internal dimensions (L x W x H): 258 x 164 x 67 mm - Load capacity: 5.00 kg - Load capacity (coupled): 15.00 kg - Permissible ceiling load: 100.00 kg - Product weight without accessories: 0.40 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 15.79

• 

  REMS REMS pressing jaw pressing tongs standard TH20 ( 570470 ) for ROMAX 4000 / Akku Press ACC etc

  Sun, 11/16/2025

  Scope of Delivery: - 1x REMS crimping jaw crimping pliers standard TH20 ( 570470 ) Product Description: The heavy-duty pressing tongs from REMS are made of forged and specially hardened special steel. The pressing contours of the REMS pressing tongs are system-specific and correspond to the pressing contours of the respective pressfitting systems. This ensures perfect, system-compliant and safe pressing. They have a high-precision machined and precisely rounded pressing contour and therefore significantly lower manufacturing tolerances than with a moulded pressing contour. Technical Data: - Diameter: 20 mm - Product weight: 1820 g - Product height: 45 mm - Product length: 145 mm - Product width: 95 mm - Country of origin: DE - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 105.99

• 

  Festool Festool SORTAINER SYS 3-SORT/9 Systainer tool case organiser ( 491985 ) 395 x 295 x 210 mm

  Sun, 11/16/2025

  Scope of Delivery: - 1x Festool SORTAINER SYS 3-SORT/9 Systainer ( 491985 ) Product Description: With the SORTAINER SYS 3-SORT/9, Festool offers a systainer with many small drawers for nails, dowels or screws. The Systainer has 6 small and 3 medium drawers, as well as 9 label holders and 16 labelling strips for neatly labelling the individual drawers. The SORTAINER can of course be combined with the existing Systainer range. Festool is a premium manufacturer of power tools, characterised by a long tradition and high-quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's description: SORTAINER SYS 3-SORT/9 - Manufacturer number: 491985 - Dimensions: 395 x 295 x 210 mm - Product weight: 5100 g - Dimensions small drawer: 255 x 75 x 30 mm - Dimensions medium drawer: 255 x 165 x 30 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 92.01

• 

  Kreg KREG Pocket-Hole cylinder head screw 25 mm 100 pcs. ( SPS-F1-100 ) Square drive Partial thread Fine thread Self-tapping galvanised

  Sun, 11/16/2025

  Scope of Delivery: - 100 x KREG Pocket-Hole cylinder head screw 25 mm ( SPS-F1-100 ) - 1x storage box Product Description: These screws from KREG are cylinder head screws that are suitable for pocket holes. They are galvanised so that they are protected against rust. They have a square drive and a partial thread / fine thread and are self-tapping. Pocket holes are stepped holes that are drilled at a very shallow angle to the surface of the wood. The screw screwed into the hole disappears completely into the wood. The Kreg jig system makes it easy and convenient for any craftsman to produce high-quality furniture and woodwork. Technical Data: - Suitable for: Indoor use - Length: 25 mm - Finish: galvanised - Head shape: Pan-head - Thread type: Partial thread / fine thread - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 10.89

• 

  Kreg KREG Pocket-Hole pan-head screw 32 mm 500 pcs ( SML-F125-500 ) Square drive Partial thread Fine thread Self-tapping galvanised

  Sun, 11/16/2025

  Scope of Delivery: - 500x KREG Pocket-Hole pan-head screw 32 mm ( SML-F125-250 ) - 2x storage box Product Description: These screws from KREG are pan-head screws that are suitable for pocket holes. They are galvanised so that they are protected against rust. They have a square drive and a partial thread / fine thread and are self-tapping. Pocket holes are stepped holes that are drilled at a very shallow angle to the surface of the wood. The screw screwed into the hole disappears completely into the wood. The Kreg jig system makes it easy and convenient for any craftsman to produce high-quality furniture and woodwork. Technical Data: - Suitable for: Indoor use - Length: 32 mm - Finish: galvanised - Head shape: Maxi-Loc Head - Thread type: Partial thread / fine thread - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 38.79

• 

  Kreg KREG Pocket-Hole pan-head screw 32 mm 250 pcs ( SML-F125-250 ) Square drive Partial thread Fine thread Self-tapping galvanised

  Sun, 11/16/2025

  Scope of Delivery: - 250x KREG Pocket-Hole pan-head screw 32 mm ( SML-F125-250 ) - 1x storage box Product Description: These screws from KREG are pan-head screws that are suitable for pocket holes. They are galvanised so that they are protected against rust. They have a square drive and a partial thread / fine thread and are self-tapping. Pocket holes are stepped holes that are drilled at a very shallow angle to the surface of the wood. The screw screwed into the hole disappears completely into the wood. The Kreg jig system makes it easy and convenient for any craftsman to produce high-quality furniture and woodwork. Technical Data: - Suitable for: Indoor use - Length: 32 mm - Finish: galvanised - Head shape: Maxi-Loc Head - Thread type: Partial thread / fine thread - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 20.58

• 

  Kreg Kreg Automaxx workbench clamp 76 mm ( KBC3 ) Clamp Table clamp

  Sun, 11/16/2025

  Scope of Delivery: - 1x Kreg Automaxx workbench clamp ( KBC3 ) Product Description: Kreg offers the Automaxx workbench clamp KBC3 for fixing workpieces to the table with a constant clamping force. The clamp automatically adjusts to the thickness of the workpiece. The clamping force can be individually adjusted using a wheel on the handle. Kreg is a leading manufacturer of hand tools for furniture making and woodworking, characterised above all by its high quality workmanship and sophisticated systems. Technical Data: - Manufacturer: Kreg - Manufacturer's description: Automaxx workbench clamp - Manufacturer number: KBC3 - Clamping capacity: 76 mm - Weight: 700 g - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 48.87

• 

  KS Tools KS TOOLS 1/4" MODIFIX Mini-T-Griff-Schwenkkopf-Knarre, 72 Zahn ( 914.1405 )

  Sun, 11/16/2025

  Produktbeschreibung:1/4" MODIFIX Mini-T-Griff-Schwenkkopf-Knarre, 72 Zahn · MODIFIX® Mini-T-Griff-Schwenkkopf-KnarreMerkmale: Antriebsvierkant nach DIN 3120 / ISO 1174 mit Kugelarretierung umschaltbar fein verzahnter 72-Zahn Ratschenmechanismus multifunktional einsetzbar Schwenkgabel nachstellbar für konstant straffen Sitz des Schwenkkopfes ergonomischer 2-Komponentengriff mit Weichzone matt satiniert Chrom Vanadium Anwendung: T-Griff-Knarre / Schraubendreher-Knarre. Verstellbar in 2 Positionen 0° + 90°Technische Daten: - Drehmoment max Nm: 60 Nm - Durchmesser D: 30.0 mm - Ersatzkopf: 914.1405-1 - Funktions-Attribut 1: Einsatzschnelllösefunktion - Funktions-Attribut 2: Umschaltbar - Funktions-Attribut 3: flexibler Kopf - Gelenk: ja - Gesamtlänge L in mm: 165.0 mm - Gewicht [g]: 179 g - Handgriff: 2-Komponentengriff - Herstellernummer: 914.1405 - Kopfhöhe (A): 20.0 mm - Material1: Feinster Chrom Vanadium Stahl, matt satiniert verchromt - Norm: DIN 3120, ISO 1174 - Ratschenfunktion: ja - Rückschwenkwinkel: 5° - Vierkantantrieb in Zoll: 1/4" - Zahn: 72 Zahn

  Read more less

  1 - 2 business days

  CHF 40.74

• Sale -CHF 19.61

  DeWalt DeWalt Tough Box DS 150 tool case ( 1-70-321 ) + insert for 4.0 and 5.0 Ah battery

  Sun, 11/16/2025

  Scope of Delivery: - 1x DeWalt 1-70-321 DS 150 Tough Box tool case - 1x DeWalt insert for 4.0 and 5.0 Ah battery Product Description: The DeWalt Tough Box DS 150 is an extremely impact-resistant, robust tool case with 4 mm thick Bozen walls. It is stackable, dust-proof and splash-proof, and the case also has a pressure equalisation button to equalise the air pressure inside and out. On the outside, eyelets embedded in the case can be used for padlocks, as well as a steel hook for hanging the case on a wall fixture. The robust stainless steel clasps at the front are also very robust and rust-proof. The handles are made of bi-material (polypropylene + thermoplastic elastomer TPR) and are therefore also extremely impact-resistant and robust. The interior consists of a large chamber with a removable insert for two 4.0 or 5.0 Ah batteries, one impact and one drill driver and a charger. A second storage area can be used in the lid of the case, which can be filled with bits & drills, plugs, screws and other accessories separately from the large chamber. Technical Data: - Manufacturer: DeWalt - Manufacturer's description: Tough Box DS 150 - Manufacturer number: 1-70-321 - Weight: 4.5 kg - Max. Load capacity: 30 kg - Dimensions ( H x D x W ): 158 x 336 x 550 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  CHF 42.37 CHF 22.76

• 

  KS Tools KS TOOLS Körner, 8-kant, Ø 4mm ( 162.0361 )

  Sun, 11/16/2025

  Produktbeschreibung:Körner, 8-kant, Ø 4mm · KörnerMerkmale: DIN 7250 8-kant nachschleifbare Spitze Arbeitsenden durchgehärtet Schaft goldfarbig einbrennlackiert blank poliert Chrom-Molybdän Technische Daten: - Ausführung Schlagkopf: gehärtet - Durchmesser Spitze D in mm: 4 mm - Gesamtlänge L in mm: 120.0 mm - Gewicht [g]: 65 g - Handgriffnummer: - - Handschutz: nein - Herstellernummer: 162.0361 - Material1: Feinster Chrom Vanadium Stahl - Norm: DIN 7250 - Schaftdurchmesser S in mm: 10 mm - Schaftform: 8-kant - Variantenartikel : 162.0361

  Read more less

  1 - 2 business days

  CHF 9.47

Show more products